I.S. EN ISO 1927-3:2012
Current
Current
The latest, up-to-date edition.
MONOLITHIC (UNSHAPED) REFRACTORY PRODUCTS - PART 3: CHARACTERIZATION AS RECEIVED (ISO 1927-3:2012)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2012
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Principle
4 Sampling
5 Determination of chemical composition
6 Determination of grain-size distribution
7 Determination of moisture content
8 Determination of workability index
9 Test report
Annex A (informative) - Summary of tests
Describes the methods for the characterization of monolithic (unshaped) refractory materials as received and for checking the homogeneity of a delivery of a product.
| DevelopmentNote |
Supersedes I.S. EN 1402-3. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 1927-3:2012 | Identical |
| EN ISO 1927-3:2012 | Identical |
| ISO 21587-1:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 1: Apparatus, reagents, dissolution and gravimetric silica |
| ISO 21079-3:2008 | Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP -AES) |
| ISO 21587-3:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 3: Inductively coupled plasma and atomic absorption spectrometry methods |
| ISO 14719:2011 | Chemical analysis of refractory material glass and glazes — Determination of Fe2+ and Fe3+ by the spectral photometric method with 1,10-phenanthroline |
| ISO 12677:2011 | Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 21079-2:2008 | Chemical analysis of refractories containing alumina, zirconia, and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis |
| ISO 10058-3:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) |
| ISO 21587-2:2007 | Chemical analysis of aluminosilicate refractory products (alternative to the X-ray fluorescence method) Part 2: Wet chemical analysis |
| ISO 20565-2:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis |
| ISO 10058-2:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 2: Wet chemical analysis |
| ISO 21078-1:2008 | Determination of boron (III) oxide in refractory products Part 1: Determination of total boron (III) oxide in oxidic materials for ceramics, glass and glazes |
| ISO 20565-1:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica |
| EN 15991:2015 | Testing of ceramic and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by inductively coupled plasma optical emission spectrometry (ICP OES) with electrothermal vaporisation (ETV) |
| ISO 20565-3:2008 | Chemical analysis of chrome-bearing refractory products and chrome-bearing raw materials (alternative to the X-ray fluorescence method) — Part 3: Flame atomic absorption spectrometry (FAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) |
| ISO 1927-1:2012 | Monolithic (unshaped) refractory products — Part 1: Introduction and classification |
| ISO 21068-2:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 2: Determination of loss on ignition, total carbon, free carbon and silicon carbide, total and free silica and total and free silicon |
| ISO 21068-1:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 1: General information and sample preparation |
| ISO 1927-2:2012 | Monolithic (unshaped) refractory products — Part 2: Sampling for testing |
| EN 15979:2011 | Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation |
| ISO 21068-3:2008 | Chemical analysis of silicon-carbide-containing raw materials and refractory products — Part 3: Determination of nitrogen, oxygen and metallic and oxidic constituents |
| ISO 26845:2008 | Chemical analysis of refractories General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods |
| ISO 21078-2:2006 | Determination of boron(III) oxide in refractory products — Part 2: Acid extraction method for the determination of boron(III) oxide in binder components |
| ISO 21079-1:2008 | Chemical analysis of refractories containing alumina, zirconia and silica — Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents and dissolution |
| ISO 10058-1:2008 | Chemical analysis of magnesite and dolomite refractory products (alternative to the X-ray fluorescence method) — Part 1: Apparatus, reagents, dissolution and determination of gravimetric silica |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.