I.S. EN ISO 18278-1:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015)
Hardcopy , PDF
English
01-01-2015
27-06-2022
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Weldability
5 Preparation of welding equipment
6 Test procedures
7 Test report
Annex A (informative) - How to evaluate the mass and friction
of the welding head
Bibliography
Defines procedures for assessing the generic weldability for resistance welding of uncoated and coated metals.
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 18278-1:2015-08 | Identical |
| NS EN ISO 18278-1 : 2004 | Identical |
| EN ISO 18278-1:2015 | Identical |
| NEN EN ISO 18278-1 : 2015 | Identical |
| ISO 18278-1:2015 | Identical |
| NF EN ISO 18278-1 : 2015 | Identical |
| NBN EN ISO 18278-1 : 2015 | Identical |
| BS EN ISO 18278-1:2015 | Identical |
| ONORM EN ISO 18278-1 : JUL 2015 | Identical |
| UNE-EN ISO 18278-1:2015 | Identical |
| ISO 5182:2016 | Resistance welding — Materials for electrodes and ancillary equipment |
| ISO 14373:2015 | Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels |
| ISO 14554-2:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 2: Elementary quality requirements |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| ISO 15614-13:2012 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 13: Upset (resistance butt) and flash welding |
| ISO 14323:2015 | Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds |
| ISO 17657-2:2005 | Resistance welding — Welding current measurement for resistance welding — Part 2: Welding current meter with current sensing coil |
| ISO 14270:2016 | Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
| ISO 14272:2016 | Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds |
| ISO 14273:2016 | Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds |
| ISO 17654:2011 | Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds |
| ISO 17653:2012 | Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds |
| ISO 16432:2006 | Resistance welding — Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
| ISO 693:1982 | Dimensions of seam welding wheel blanks |
| ISO 18592:2009 | Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens |
| ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 12: Spot, seam and projection welding |
| ISO 669:2016 | Resistance welding — Resistance welding equipment — Mechanical and electrical requirements |
| ISO 8167:1989 | Projections for resistance welding |
| ISO 14554-1:2013 | Quality requirements for welding — Resistance welding of metallic materials — Part 1: Comprehensive quality requirements |
| SEP 1220-2 : 2011 | TESTING AND DOCUMENTATION GUIDELINE FOR THE JOINABILITY OF THIN SHEET OF STEEL - PART 2: RESISTANCE SPOT WELDING |
| ISO 18278-2:2016 | Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials — Welding procedure specification — Part 5: Resistance welding |
| ISO 16433:2006 | Resistance welding — Procedure for seam welding of uncoated and coated low carbon steels |
| ISO 14324:2003 | Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints |
| ISO 17677-1:2009 | Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding |
| ISO/TR 581:2005 | Weldability — Metallic materials — General principles |
| ISO 5821:2009 | Resistance welding — Spot welding electrode caps |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.