I.S. EN ISO 13702:2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015)
Hardcopy , PDF
16-04-2024
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, and abbreviated terms
4 Objectives
5 Fire and explosion evaluation and risk management
6 Installation layout
7 Emergency shutdown systems and blowdown
8 Control of ignition
9 Control of spills
10 Emergency power systems
11 Fire and gas (F&G) detection systems
12 Active fire protection
13 Passive fire protection
14 Explosion mitigation and protection measures
15 Response to fires and explosions
16 Inspection, testing, and maintenance
Annex A (informative) - Typical fire and explosion
hazardous events
Annex B (normative) - Guidelines to the control and
mitigation of fires and explosions
Annex C (informative) - Typical examples of design
requirements for large integrated offshore
installations
Bibliography
Defines the objectives and functional requirements for the control and mitigation of fires and explosions on offshore installations used for the development of hydrocarbon resources.
| DocumentType |
Standard
|
| Pages |
76
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN ISO 13702:2015 | Identical |
| NBN EN ISO 13702 : 2015 | Identical |
| NF EN ISO 13702 : 2000 | Identical |
| NS EN ISO 13702 : 1999 | Identical |
| DIN EN ISO 13702:2015-12 | Identical |
| NEN EN ISO 13702 : 2015 | Identical |
| EN ISO 13702:1999 | Identical |
| ISO 13702:2015 | Identical |
| UNI EN ISO 13702 : 2003 | Identical |
| SN EN ISO 13702:2015 | Identical |
| ONORM EN ISO 13702 : 2015 | Identical |
| DIN EN ISO 13702:2000-06 | Identical |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| IEC/ISO 31010:2009 | Risk management - Risk assessment techniques |
| ISO 31000:2009 | Risk management Principles and guidelines |
| IEC 61892-7:2014 | Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas |
| IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
| ISO 15544:2000 | Petroleum and natural gas industries — Offshore production installations — Requirements and guidelines for emergency response |
| ISO 10418:2003 | Petroleum and natural gas industries Offshore production installations Analysis, design, installation and testing of basic surface process safety systems |
| ISO 13819-1:1995 | Petroleum and natural gas industries Offshore structures Part 1: General requirements |
| ISO 13819-2:1995 | Petroleum and natural gas industries Offshore structures Part 2: Fixed steel structures |
| IEC 61892-2:2012 | Mobile and fixed offshore units - Electrical installations - Part 2: System design |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| EEMUA 201 : 2010 | PROCESS PLANT CONTROL DESKS UTILISING HUMAN-COMPUTER INTERFACES - GUIDE TO DESIGN, OPERATIONAL AND HUMANCOMPUTER INTERFACE ISSUES |
| ISO 21789:2009 | Gas turbine applications — Safety |
| ISO 14004:2016 | Environmental management systems General guidelines on implementation |
| ISO/IEC Guide 73:2002 | Risk management Vocabulary Guidelines for use in standards |
| ISO 3941:2007 | Classification of fires |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| IEC 60092-502:1999 | Electrical installations in ships - Part 502: Tankers - Special features |
| IMO IB867 : 2010 | CODE ON ALERTS AND INDICATORS 2009 |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| IEC TR 61508-0:2005 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 0: Functional safety and IEC 61508 (see Functional Safety and IEC 61508) |
| ISO 22899-1:2007 | Determination of the resistance to jet fires of passive fire protection materials Part 1: General requirements |
| ISO 23251:2006 | Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
| API RP 2030 : 2014 | APPLICATION OF FIXED WATER SPRAY SYSTEMS FOR FIRE PROTECTION IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.