I.S. EN ISO 11111-1:2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
TEXTILE MACHINERY - SAFETY REQUIREMENTS - PART 1: COMMON REQUIREMENTS (ISO 11111-1:2016)
Hardcopy , PDF
30-04-2017
English
04-07-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures for frequently
occurring hazards
6 Significant hazards and corresponding safety
requirements and/or measures for certain machine
elements and their combinations
7 Verification of the compliance with the safety
requirements and/or measures
8 Information concerning machine use
Annex A (normative) - Specifications
Annex B (normative) - Hot surfaces
Annex C (normative) - Verification methods
Annex D (normative) - Nip between roller and fabric
Annex E (informative) - List of machines and equipment
used in the textile industry but not within the
scope of this part of ISO 11111
Bibliography
Annex ZA (informative) - Relationship between this
International Standard and the Essential
Requirements of EU Directive 2006/42/EC
Defines safety requirements for frequently occurring hazards common to the types of textile machinery and the hazards of certain machine elements covered by ISO 11111-2 to ISO 11111-7.
DevelopmentNote |
Supersedes I.S. EN ISO 11111. (05/2005)
|
DocumentType |
Standard
|
Pages |
90
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
Supersedes |
Standards | Relationship |
NEN EN ISO 11111-1 : 2016 | Identical |
SN EN ISO 11111-1 : 2017 | Identical |
UNI EN ISO 11111-1 : 2010 | Identical |
NF EN ISO 11111-1 : 2016 | Identical |
EN ISO 11111-1:2016 | Identical |
ISO 11111-1:2016 | Identical |
NS EN ISO 11111-1 : 2009 | Identical |
NBN EN ISO 11111-1 : 2016 | Identical |
DIN EN ISO 11111-1:2015-01 (Draft) | Identical |
UNE-EN ISO 11111-1:2016 | Identical |
BS EN ISO 11111-1:2016 | Identical |
DIN EN ISO 11111-1:2016-12 | Identical |
EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
ISO 11111-7:2005 | Textile machinery Safety requirements Part 7: Dyeing and finishing machinery |
ISO 13855:2010 | Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
EN 12464-1:2011 | Light and lighting - Lighting of work places - Part 1: Indoor work places |
EN 693 : 2001 COR 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
ISO 14119:2013 | Safety of machinery — Interlocking devices associated with guards — Principles for design and selection |
ISO 14122-3:2016 | Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
ISO 11161:2007 | Safety of machinery — Integrated manufacturing systems — Basic requirements |
EN 60825-1:2014/AC:2017-06 | SAFETY OF LASER PRODUCTS - PART 1: EQUIPMENT CLASSIFICATION AND REQUIREMENTS (IEC 60825-1:2014) |
EN 1526:1997+A1:2008 | Safety of industrial trucks - Additional requirements for automated functions on trucks |
EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
ISO 5232:1998 | Graphical symbols for textile machinery |
ISO 10218-1:2011 | Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
ISO 10218-2:2011 | Robots and robotic devices Safety requirements for industrial robots Part 2: Robot systems and integration |
ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISO 3691-1:2011 | Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
ISO 23771:2015 | Textile machinery Guide to the design of textile machinery for reduction of the noise emissions |
EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
ISO 14118:2000 | Safety of machinery Prevention of unexpected start-up |
ISO 13851:2002 | Safety of machinery Two-hand control devices Functional aspects and design principles |
ISO 11111-4:2005 | Textile machinery Safety requirements Part 4: Yarn processing, cordage and rope manufacturing machinery |
ISO 14123-1:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers |
ISO 11111-6:2005 | Textile machinery Safety requirements Part 6: Fabric manufacturing machinery |
EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
EN 12547:2014 | Centrifuges - Common safety requirements |
ISO 11111-3:2005 | Textile machinery Safety requirements Part 3: Nonwoven machinery |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
ISO 14122-4:2016 | Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
ISO/TR 14121-2:2012 | Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
ISO 11111-5:2005 | Textile machinery Safety requirements Part 5: Preparatory machinery to weaving and knitting |
EN 1459:1998+A3:2012 | Safety of industrial trucks - Self-propelled variable reach trucks |
ISO 13856-2:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for design and testing of pressure-sensitive edges and pressure-sensitive bars |
EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses |
IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
EN 1114-1:2011 | Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders |
EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
IEC 61496-1:2012 | Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
EN 12198-3:2002+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction of radiation by attenuation or screening |
ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
ISO 13856-1:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors |
EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
ISO 9902:1993 | Textile machinery acoustics Determination of sound pressure levels and sound power levels emitted by textile machines Engineering and survey methods |
IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV | Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
ISO 13856-3:2013 | Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices |
ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
IEC 61496-2:2013 | Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
ISO 14123-2:2015 | Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures |
ISO 11111-2:2005 | Textile machinery Safety requirements Part 2: Spinning preparatory and spinning machines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.