I.S. EN ISO 10848-1:2017
Current
The latest, up-to-date edition.
ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017)
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Quantities to characterize flanking transmission
5 Instrumentation
6 General requirements for test facility and test elements
7 Measurement methods
8 Influences from other parts of the test facility or the
building construction in the field situation
9 Shielding
10 Expression of results
Annex A (normative) - Assessing the decrease in vibration
level with distance
Annex B (normative) - Calibrated structure-borne sound source
Bibliography
Gives measurement methods to characterize the flanking transmission of one or several building components.
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN ISO 10848-1 : 2006 | Identical |
| UNE-EN ISO 10848-1:2007 | Identical |
| DIN EN ISO 10848-1:2016-10 (Draft) | Identical |
| BS EN ISO 10848-1:2006 | Identical |
| UNI EN ISO 10848-1 : 2006 | Identical |
| EN ISO 10848-1:2017 | Identical |
| NBN EN ISO 10848-1 : 2006 | Identical |
| ISO 10848-1:2017 | Identical |
| DIN EN ISO 10848-1:2006-08 | Identical |
| IEC 61183:1994 | Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters |
| ISO 10848-2:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 2: Application to Type B elements when the junction has a small influence |
| ISO 10140-2:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 2: Measurement of airborne sound insulation |
| ISO 717-2:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation |
| ISO 3382-2:2008 | Acoustics Measurement of room acoustic parameters Part 2: Reverberation time in ordinary rooms |
| ISO 7626-1:2011 | Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| OIML R 58 : 1998 | SOUND LEVEL METERS |
| ISO 7626-5:1994 | Vibration and shock Experimental determination of mechanical mobility Part 5: Measurements using impact excitation with an exciter which is not attached to the structure |
| ISO 10140-4:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 4: Measurement procedures and requirements |
| ISO 7626-2:2015 | Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter |
| ISO 12354-1:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 1: Airborne sound insulation between rooms |
| OIML R 88 : 1998 | INTEGRATING-AVERAGING SOUND LEVEL METERS |
| EN 15657:2017 | Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions |
| ISO 1683:2015 | Acoustics Preferred reference values for acoustical and vibratory levels |
| ISO 18233:2006 | Acoustics Application of new measurement methods in building and room acoustics |
| ISO 717-1:2013 | Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 10140-5:2010 | Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment |
| IEC 61672-3:2013 | Electroacoustics - Sound level meters - Part 3: Periodic tests |
| ISO 10848-4:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 4: Application to junctions with at least one Type A element |
| ISO 15186-1:2000 | Acoustics Measurement of sound insulation in buildings and of building elements using sound intensity Part 1: Laboratory measurements |
| ISO 12354-2:2017 | Building acoustics — Estimation of acoustic performance of buildings from the performance of elements — Part 2: Impact sound insulation between rooms |
| ISO 10848-3:2017 | Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 3: Application to Type B elements when the junction has a substantial influence |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.