I.S. EN ISO 10524-3:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES (ISO 10524-3:2005)
Hardcopy , PDF
16-02-2019
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 General requirements
6 Test methods
7 Marking, colour coding, packaging
8 Information to be supplied by the manufacturer
Annex A (informative) - Examples of pressure
regulators integrated with cylinder
valves
Annex B (normative) - Rationale
Annex C (informative) - Reported regional and national
deviations of colour coding and nomenclature
for medical gases
Bibliography
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 93/42/EEC
Applicable to pressure regulators integrated with cylinder valves intended for the administration of medical gases in the treatment, management, diagnostic evaluation and care of patients.
| DevelopmentNote |
Supersedes I.S. EN 738-3. (07/2006)
|
| DocumentType |
Standard
|
| Pages |
59
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 10524-3:2007 | Identical |
| ONORM EN ISO 10524-3 : 2013 | Identical |
| NS EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
| UNI EN ISO 10524-3 : 2013 | Identical |
| NEN EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
| SN EN ISO 10524-3 : 2006 AMD 1 2014 | Identical |
| DIN EN ISO 10524-3:2013-06 | Identical |
| ISO 10524-3:2005 | Identical |
| NF EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
| NBN EN ISO 10524-3 : 2006 AMD 1 2013 | Identical |
| BS EN ISO 10524-3 : 2006 | Identical |
| CGSB 24.2 : M86 | IDENTIFICATION OF MEDICAL GAS CONTAINERS, PIPELINES AND VALVES |
| ISO 10920:1997 | Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| EN ISO 11116-1 : 1999 | GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS |
| EN 737-1 : 1998 | MEDICAL GAS PIPELINE SYSTEMS - TERMINAL UNITS FOR COMPRESSED MEDICAL GASES AND VACUUM |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| EN 737-3:1998/A1:1999 | MEDICAL GAS PIPELINE SYSTEMS - PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM |
| CGA C 9 : 2013 | STANDARD COLOR MARKING OF COMPRESSED GAS CONTAINERS FOR MEDICAL USE |
| ISO 5145:2014 | Cylinder valve outlets for gases and gas mixtures Selection and dimensioning |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
| ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
| EN 739:1998/A1:2002 | LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES |
| EN 962:1996/A2:2000 | TRANSPORTABLE GAS CYLINDERS - VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTS |
| EN 1089-3:2011 | Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding |
| EN 849:1996/A2:2001 | TRANSPORTABLE GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
| ISO 407:2004 | Small medical gas cylinders Pin-index yoke-type valve connections |
| AS 2896-2011 | Medical gas systems - Installation and testing of non-flammable medical gas pipeline systems |
| EN 738-3:1998/A1:2002 | PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 3: PRESSURE REGULATORS INTEGRATED WITH CYLINDER VALVES |
| ISO/TR 7470:1988 | Valve outlets for gas cylinders — List of provisions which are either standardized or in use |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| AS 4484:2016 | Gas cylinders for industrial, scientific, medical and refrigerant use - Labelling and colour coding |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 15996:2017 | Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.