I.S. EN ISO 10434:2004
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
BOLTED BONNET STEEL GATE VALVES FOR THE PETROLEUM, PETROCHEMICAL AND ALLIED INDUSTRIES
Hardcopy , PDF
31-03-2021
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Pressure/temperature ratings
5 Design
6 Materials
7 Testing, inspection and examination
8 Marking
9 Preparation for despatch
Annex A (informative) Information to be specified by
the purchaser
Annex B (informative) Identification of valve terms
Bibliography
Provides the requirements for a heavy-duty series of bolted bonnet steel gate valves for petroleum refinery and related applications where corrosion, erosion and other service conditions would indicate a need for full port openings, heavy wall sections and large stem diameters.
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN ISO 10434 : 2005 | Identical |
| ISO 10434:2004 | Identical |
| NF EN ISO 10434 : 2004 | Identical |
| NBN EN ISO 10434 : 2004 | Identical |
| NEN EN ISO 10434 : 2004 | Identical |
| NS EN ISO 10434 : 1ED 2004 | Identical |
| SN EN ISO 10434 : 2004 | Identical |
| UNI EN ISO 10434 : 2004 | Identical |
| UNE-EN ISO 10434:2005 | Identical |
| BS EN ISO 10434:2004 | Identical |
| EN ISO 10434:2004 | Identical |
| DIN EN ISO 10434:2005-01 | Identical |
| ASME B1.12 : 1987 | CLASS 5 INTERFERENCE-FIT THREAD |
| ISO 5210:2017 | Industrial valves — Multi-turn valve actuator attachments |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its alloys |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ASME B16.10 : 2017 | FACE-TO-FACE AND END-TO-END DIMENSIONS OF VALVES |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| ASME B36.10 : 1979 | WELDED AND SEAMLESS WROUGHT STEEL PIPE |
| API std 602 : 2015 | GATE, GLOBE, AND CHECK VALVES FOR SIZES DN 100 (NPS 4) AND SMALLER FOR THE PETROLEUM AND NATURAL GAS INDUSTRIES |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| API STD 600 : 2015 | STEEL GATE VALVES - FLANGED AND BUTT-WELDING ENDS, BOLTED BONNETS |
| ISO 5209:1977 | General purpose industrial valves Marking |
| ISO 6002:1992 | Bolted bonnet steel gate valves |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 5752:1982 | Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions |
| ISO 4200:1991 | Plain end steel tubes, welded and seamless — General tables of dimensions and masses per unit length |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| MSS SP 55 : 2011 | QUALITY STANDARD FOR STEEL CASTINGS FOR VALVES, FLANGES, FITTINGS, AND OTHER PIPING COMPONENTS - VISUAL METHOD FOR EVALUATION OF SURFACE IRREGULARITIES |
| ISO 10497:2010 | Testing of valves — Fire type-testing requirements |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| MSS SP 102 : 1989 | MULTI-TURN VALVE ACTUATOR ATTACHMENT - FLANGE AND DRIVING COMPONENT DIMENSIONS AND PERFORMANCE CHARACTERISTICS |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| NFM 87 412 : 1986 | INDUSTRIE DU PETROLE - ROBINETTERIE EN ACIER FORGE - SPECIFICATIONS |
| ASME B16.25 : 2012 | BUTTWELDING ENDS |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.