I.S. EN 634-2:2007
Current
The latest, up-to-date edition.
CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS
Hardcopy , PDF
English
01-01-2007
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Requirements
4 Verification of compliance
5 Marking
Bibliography
Describes the requirements for particleboards bonded with Ordinary Portland Cement (OPC) for use in dry, humid and external conditions.
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 634-2:2007 | Identical |
| EN 634-2:2007 | Identical |
| SN EN 634-2 : 2007 | Identical |
| NS EN 634-2 : 2ED 2007 | Identical |
| NEN EN 634-2 : 2007 | Identical |
| NBN EN 634-2 : 2007 | Identical |
| UNI EN 634-2 : 2007 | Identical |
| BS EN 634-2:2007 | Identical |
| NF EN 634-2 : 2007 | Identical |
| DIN EN 634-2:2007-05 | Identical |
| I.S. 440:2009 | TIMBER FRAME DWELLINGS |
| I.C.P. 2:2002 | SLATING AND TILING |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 634-1:1995 | Cement-bonded particleboards - Specification - Part 1: General requirements |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 1328:1996 | Cement bonded particleboards - Determination of frost resistance |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 1128:1995 | Cement-bonded particleboards - Determination of hard body impact resistance |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.