I.S. EN 62343-1-3:2013
Current
The latest, up-to-date edition.
DYNAMIC MODULES - PART 1-3: PERFORMANCE STANDARDS - DYNAMIC GAIN TILT EQUALIZER (NON-CONNECTORIZED) (IEC 62343-1-3:2012 (EQV))
Hardcopy , PDF
English
01-01-2013
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Operating and storage conditions
5 Test
6 Test report
7 Performance requirements
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Covers the guideline minimum initialization test and measurement requirements and severities, for a dynamic gain tilt equalizer (DGTE).
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
17
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| NF EN 62343-1-3 : 2013 | Identical |
| NBN EN 62343-1-3 : 2013 | Identical |
| EN 62343-1-3:2013 | Identical |
| DIN EN 62343-1-3:2013-08 | Identical |
| BS EN 62343-1-3:2013 | Identical |
| EN 61300-3-38 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-38: EXAMINATIONS AND MEASUREMENTS - GROUP DELAY, CHROMATIC DISPERSION AND PHASE RIPPLE |
| IEC 61300-3-2:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device |
| EN 62343-5-1:2015 | Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement |
| IEC 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| IEC 61300-2-14:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power |
| EN 61300-3-7:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components |
| IEC 61300-3-7:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components |
| EN 61753-022-2:2013 | Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
| IEC 61753-021-2:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| EN 61300-3-2:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device |
| IEC 61300-3-6:2008 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| EN 61300-2-14:2013 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power |
| EN 61300-3-6:2009 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss |
| EN 61753-021-2:2008 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| IEC 61753-022-2:2012 | Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
| IEC 61300-3-38:2012 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38: Examinations and measurements - Group delay, chromatic dispersion and phase ripple |
| EN 61300-3-32 : 2006 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-32: EXAMINATIONS AND MEASUREMENTS - POLARIZATION MODE DISPERSION MEASUREMENT FOR PASSIVE OPTICAL COMPONENTS |
| IEC 62343-5-1:2014 | Dynamic modules - Part 5-1: Test methods - Dynamic gain tilt equalizer - Gain tilt settling time measurement |
| IEC 61300-3-32:2006 | Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.