I.S. EN 61481-1:2014
Current
The latest, up-to-date edition.
LIVE WORKING - PHASE COMPARATORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C.
Hardcopy , PDF
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Tests
6 Conformity assessment of phase comparators
having completed the production phase
7 Modifications
Annex A (normative) - Instructions for use
Annex B (normative) - Suitable for live working; double
triangle (IEC 60417-5216 (2002-10))
Annex C (normative) - Chronology of type tests
Annex D (normative) - Classification of defects and tests to
be allocated
Annex E (informative) - Information and guidelines on the use
of the limit mark and of a contact electrode extension
Annex F (informative) - Rationale for the classification of
defects
Annex G (informative) - In-service care
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Pertains to portable phase comparators of capacitive type to be used on electrical systems for voltages exceeding 1 kV a.c. and frequencies of 50 Hz and/or 60 Hz.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017) Partially Supersedes 2001 edition of I.S. EN 61481. (07/2017)
|
| DocumentType |
Standard
|
| Pages |
176
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 61481-1:2014 | Identical |
| IEC 61477:2009 | Live working - Minimum requirements for the utilization of tools, devices and equipment |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| IEC 61936-1:2010+AMD1:2014 CSV | Power installations exceeding 1 kV a.c. - Part 1: Common rules |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
| IEC 60855-1:2016 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| IEC 60942:2003 | Electroacoustics - Sound calibrators |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60743:2013 | Live working - Terminology for tools, devices and equipment |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
| EN 61318:2008 | Live working - Conformity assessment applicable to tools, devices and equipment |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN 61326-1:2013 | Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements |
| EN ISO 354:2003 | Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| EN 61477:2009/corrigendum:2010 | LIVE WORKING - MINIMUM REQUIREMENTS FOR THE UTILIZATION OF TOOLS, DEVICES AND EQUIPMENT |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| IEC 61318:2007 | Live working - Conformity assessment applicable to tools, devices and equipment |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
| EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
| IEC 60050-651:2014 | International Electrotechnical Vocabulary (IEV) - Part 651: Live working |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| ISO 3745:2012 | Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms |
| IEC 60071-1:2006+AMD1:2010 CSV | Insulation co-ordination - Part 1: Definitions, principles and rules |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
| EN 60942:2003 | Electroacoustics - Sound calibrators |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 61260:1995/A1:2001 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
| EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.