I.S. EN 61174:2015
Current
The latest, up-to-date edition.
MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM (ECDIS) - OPERATIONAL AND PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS
Hardcopy , PDF
English
01-01-2015
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
National Foreword
FOREWORD
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Minimum operational and performance requirements
5 Requirements contained in IHO publications
6 Methods of testing and required test results
Annex A (normative) - SENC information to be displayed
during route planning and route monitoring
Annex B (normative) - Navigational elements and
parameters
Annex C (normative) - Areas for which special conditions
exist
Annex D (normative) - Alerts and indications
Annex E (normative) - Mandatory terminology and
abbreviations
Annex F (normative) - Back-up arrangements
Annex G (normative) - ECDIS in the RCDS mode of operation
Annex H (normative) - Alerts and indications in the RCDS
mode of operation
Annex I (normative) - Scenario definitions and plots
Annex J (informative) - Guidance on geodetic calculations
Annex K (informative) - Guidance for testing
Annex L (informative) - Examples of ENC Update Status
Report
Annex M (normative) - Elements of an electronic chart
database
Annex N (informative) - Use cases for safety contour and
safety depth
Annex O (informative) - Guidelines on use of electronic
chart systems in polar waters
Annex P (normative) - Scenarios for polar areas above 85
degrees North
Annex Q (normative) - IEC 61162 interfaces
Annex R (informative) - Conversion between IEC 61162-1
sentences and IEC 61162-3 parameter group numbers
Annex S (normative) - Route plan exchange format - RTZ
Annex T (normative) - Interface for reporting route transfer
Annex U (normative) - Sentences used by SafetyNET
Annex V (normative) - Extension of TTD sentence, Protocol
version 1
Annex W (normative) - Symbols
Bibliography
Annex ZA (normative) - Normative references to international
Publications with their corresponding European
publications
Describes the performance requirements, methods of testing and required test results of equipment conforming to performance standards not inferior to those adopted by the IMO in resolution MSC.232(82).
DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
240
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
SN EN 61174 : 1998 | Identical |
EN 61174:2015 | Identical |
NF EN 61174 : 2002 | Identical |
NBN EN 61174 : 2015 | Identical |
DIN EN 61174:2016-06 | Identical |
IEC 61174:2015 | Identical |
BS EN 61174:2015 | Identical |
EN 61924-2:2013 | Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems - Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results |
IEC 62388:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results |
IEC 61162-1:2016 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners |
IEC 62288:2014 | Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results |
IEC 61097-4:2012+AMD1:2016 CSV | Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods oftesting and required test results |
IEC 61162-3:2008+AMD1:2010+AMD2:2014 CSV | Maritime navigation and radiocommunication equipment and systems -Digital interfaces - Part 3: Serial data instrument network |
ISO 9241-12:1998 | Ergonomic requirements for office work with visual display terminals (VDTs) Part 12: Presentation of information |
IEC 61996-1:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results |
IEC 62616:2010 | Maritime navigation and radiocommunication equipment and systems - Bridge navigational watch alarm system (BNWAS) |
EN 61162-1:2016 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners |
IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
EN 61996-1 : 2013 COR 2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE VOYAGE DATA RECORDER (VDR) - PART 1: PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS (IEC 61996-1:2013) |
ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
EN 62388:2013/AC:2014 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - SHIPBORNE RADAR - PERFORMANCE REQUIREMENTS, METHODS OF TESTING AND REQUIRED TEST RESULTS |
IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
IEC 61097-6:2005+AMD1:2011 CSV | Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) |
ISO 9001:2015 | Quality management systems — Requirements |
EN 61162-450:2011/A1:2016 | MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 450: MULTIPLE TALKERS AND MULTIPLE LISTENERS - ETHERNET INTERCONNECTION |
IEC 61966-4:2000 | Multimedia systems and equipment - Colour measurement and management - Part 4: Equipment using liquid crystal display panels |
IEC 61162-2:1998 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
IEC 61162-450:2011+AMD1:2016 CSV | Maritime navigation and radiocommunication equipment and systems -Digital interfaces - Part 450: Multiple talkers and multiple listeners - Ethernet interconnection |
EN 62288:2014 | Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.