I.S. EN 60929:2011
Current
The latest, up-to-date edition.
AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
Hardcopy , PDF
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General notes on tests
5 Marking
6 General statement
7 Starting conditions
8 Operating conditions
9 Circuit power factor
10 Supply current
11 Maximum current in any lead to a cathode
12 Lamp operating current waveform
13 Impedance at audio frequencies
14 Operational tests for abnormal conditions
15 Endurance
Annex A (normative) - Tests
Annex B (normative) - Reference ballasts
Annex C (normative) - Conditions for reference lamps
Annex D (informative) - Explanation of starting conditions
Annex E (normative) - Control interface for controllable
control gear
Annex F (informative) - Examples of suitable test
set-ups for SoS and CV testing
Annex G (informative) - Example of a SoS-CV test
with diagrammatic view
Annex ZA (normative) - Normative references to international
publications with their corresponding European
publications
Bibliography
Defines performance requirements for electronic control gear for use on a.c. at 50 Hz or 60 Hz and/or d.c. supplies, both up to 1000 V, with operating frequencies deviating from the supply frequency, associated with fluorescent lamps as specified in IEC 60081 and IEC 60901, and other fluorescent lamps for high-frequency operation.
| DevelopmentNote |
Supersedes I.S. EN 60925. (11/2011) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
168
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 60929 : 2011 AMD 1 2016 | Identical |
| DIN EN 60929 : 2016 | Identical |
| EN 60929:2011/A1:2016 | Identical |
| IEC 60929:2011+AMD1:2015 CSV | Identical |
| SN EN 60929:2011+A1:2016 | Identical |
| BS EN 60929 : 2011 | Identical |
| NBN EN 60929 : 2011 AMD 1 2016 | Identical |
| UNE-EN 60929:2011 | Identical |
| IEC 61347-2-3:2011+AMD1:2016 CSV | Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps |
| IEC 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
| IEC 60050-845:1987 | International Electrotechnical Vocabulary (IEV) - Part 845: Lighting |
| IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
| EN 61347-2-3:2011/A1:2017 | LAMP CONTROL GEAR - PART 2-3: PARTICULAR REQUIREMENTS FOR A.C. AND/OR D.C. SUPPLIED ELECTRONIC CONTROL GEAR FOR FLUORESCENT LAMPS (IEC 61347-2-3:2011/A1:2016) |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| IEC 60901:1996+AMD1:1997+AMD2:2000 CSV | Single-capped fluorescent lamps - Performance specifications |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| IEC TR 62750:2012 | Unified fluorescent lamp dimming standard calculations |
| EN 60901:1996/A6:2017 | SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED) |
| CISPR TR 30-1:2012 | Test method on electromagnetic emissions - Part 1: Electronic control gear for single- and double-capped fluorescent lamps |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.