I.S. EN 60923:2005
Current
The latest, up-to-date edition.
AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS
Hardcopy , PDF
English
01-01-2005
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General notes on tests
5 Marking
6 Ballasts designed to operate at various
supply voltages
7 Circuit power-factor
8 Supply current
9 Current waveform
9.1 Lamp operating current waveform
9.2 Test procedure
10 Magnetic screening
11 Ignitors
12 Electrical requirements for ballasts for
high-pressure mercury vapour lamps
12.1 Ballast setting
12.2 Short-circuit current
12.3 Open-circuit voltage (minimum voltage for
stable operation)
13 Electrical requirements for ballasts for low-pressure
sodium vapour lamps
13.1 Ballast setting
13.2 Short-circuit current and run-up conditions
13.3 Open-circuit voltage (minimum voltage for
stable operation)
14 Electrical requirements for ballasts for metal
halide lamps
14.1 Ballast setting
14.2 Short-circuit current and run-up conditions
14.3 Open-circuit voltage (minimum voltage for
stable operation)
15 Electrical requirements for ballasts for high-pressure
sodium vapour lamps
15.1 Ballast setting
15.2 Short-circuit current
15.3 Open-circuit voltage
Annex A (normative) Reference ballasts
Annex B (normative) Reference lamps
Annex C (normative) General requirements for tests
Annex D (normative) Explanation of measurements of
ballast setting and lamp-operating
current waveform for high-pressure sodium
vapour lamps
Annex E (informative) Interpretations
Annex ZA (normative) Normative references to international
publications with their corresponding
European publications
Bibliography
Defines performance requirements for ballasts for discharge lamps such as high-pressure mercury vapour, low-pressure sodium vapour, high-pressure sodium vapour and metal halide lamps.
DevelopmentNote |
To be read in conjunction with I.S. EN 60922. (02/2002) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
DocumentType |
Standard
|
Pages |
76
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
DIN EN 60923 : 2007 | Identical |
EN 60923:2005/A1:2006 | Identical |
SN EN 60923 : 2005 | Identical |
IEC 60923:2005+AMD1:2006 CSV | Identical |
NF EN 60923 : 2006 AMD 1 2006 | Identical |
NBN EN 60923 : 2006 AMD 1 2006 | Identical |
BS EN 60923:2005 | Identical |
UNE-EN 60923:2006 | Identical |
EN 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
EN 60192:2001 | Low pressure sodium vapour lamps - Performance specifications |
IEC 61547:2009 | Equipment for general lighting purposes - EMC immunity requirements |
IEC 60662:2011 | High-pressure sodium vapour lamps - Performance specifications |
EN 61347-2-9:2013 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
IEC 60192:2001 | Low-pressure sodium vapour lamps - Performance specifications |
IEC 60188:2001 | High-pressure mercury vapour lamps - Performance specifications |
IEC 61347-2-9:2012 | Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) |
IEC 61347-1:2015 RLV | Lamp controlgear - Part 1: General and safety requirements |
EN 61347-2-1:2001/A2:2014 | LAMP CONTROLGEAR - PART 2-1: PARTICULAR REQUIREMENTS FOR STARTING DEVICES (OTHER THAN GLOW STARTERS) (IEC 61347-2-1:2000/A2:2013) |
IEC 61347-2-1:2000+AMD1:2005+AMD2:2013 CSV | Lamp controlgear - Part 2-1: Particular requirements for startingdevices (other than glow starters) |
IEC 61167:2015 | Metal halide lamps - Performance specification |
IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
IEC 60921:2004+AMD1:2006 CSV | Ballasts for tubular fluorescent lamps - Performance requirements |
EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
EN 60662:2012 | High-pressure sodium vapour lamps - Performance specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.