I.S. EN 60268-4:2014
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SOUND SYSTEM EQUIPMENT - PART 4: MICROPHONES
Hardcopy , PDF
17-10-2021
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 General conditions
5 Particular conditions
6 Type description (acoustical behaviour)
7 Terminals and controls
8 Reference point and axis
9 Rated power supply
10 Electrical impedance
11 Sensitivity
12 Response
13 Directional characteristics
14 Amplitude non-linearity
15 Limiting characteristics
16 Balance
17 Equivalent sound pressure level due to
inherent noise
18 Ambient conditions
19 External influences
20 Electromagnetic compatibility (EMC)
21 Physical characteristics
22 Classification of the characteristics to be specified
Annex A (normative) - Additional characteristics
Annex B (informative) - Sound insulation device
Annex C (informative) - Simplified procedure for 'pop'
measurements
Annex D (informative) - Recommendations for professional
digital microphones
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
Defines methods of measurement for the electrical impedance, sensitivity, directional response pattern, dynamic range and external influences of sound system microphones, and also details the characteristics to be specified by the manufacturer.
| DevelopmentNote |
For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
120
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| NBN EN 60268-4 : 2014 | Identical |
| BS EN 60268-4:2014 | Identical |
| EN 60268-4:2014 | Identical |
| DIN EN 60268-4:2016-07 | Identical |
| NF EN 60268-4 : 2014 | Identical |
| SN EN 60268-4 : 2014 | Identical |
| IEC 60268-3:2013 | Sound system equipment - Part 3: Amplifiers |
| CFR 47(PTS70-79) : OCT 2017 | TELECOMMUNICATIONS - FEDERAL COMMUNICATIONS COMMISSION |
| IEC 60958-4:2003+AMD1:2008 CSV | Digital audio interface - Part 4: Professional applications |
| IEC 60268-12:1987 | Sound system equipment. Part 12: Application of connectors for broadcast and similar use |
| EN 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| AES 3 : 2009(R2014) | AES STANDARD FOR DIGITAL AUDIO ENGINEERING - SERIAL TRANSMISSION FORMAT FOR TWO-CHANNEL LINEARLY REPRESENTED DIGITAL AUDIO DATA |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| IEC 61000-4-17:1999+AMD1:2001+AMD2:2008 CSV | Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test |
| EN 61000-4-2:2009 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| HD 483.11 : 200S3 | SOUND SYSTEM EQUIPMENT - APPLICATION OF CONNECTORS FOR THE INTERCONNECTION OF SOUND SYSTEM COMPONENTS |
| AES 42 : 2010(R2015) | AES STANDARD FOR ACOUSTICS - DIGITAL INTERFACE FOR MICROPHONES |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| EN 61000-4-3 : 2006 AMD 2 2010 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST |
| EN 60268-5:2003/A1:2009 | SOUND SYSTEM EQUIPMENT - PART 5: LOUDSPEAKERS |
| EN 60268-12:1995/A2:1995 | SOUND SYSTEM EQUIPMENT - APPLICATION OF CONNECTORS FOR BROADCAST AND SIMILAR USE |
| EN 60268-3:2013 | Sound system equipment - Part 3: Amplifiers |
| EN 61000-4-8:2010 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61938:2013 | Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| IEC 61260-1:2014 | Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications |
| IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
| HD 483.1 : 200S2 | SOUND SYSTEM EQUIPMENT - GENERAL |
| IEC 60268-1:1985 | Sound system equipment. Part 1: General |
| CISPR 35:2016 | Electromagnetic compatibility of multimedia equipment - Immunity requirements |
| EN 55103-2:2009 | Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
| EN 61000-4-4:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST (IEC 61000-4-4:2012) |
| EN 61000-4-6:2014/AC:2015 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS (IEC 61000-4-6:2013) |
| EN 300 422-2 : 1.4.1 | WIRELESS MICROPHONES; AUDIO PMSE UP TO 3 GHZ; PART 2: CLASS B RECEIVERS; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
| HD 483.2 : 200S2 | SOUND SYSTEM EQUIPMENT - EXPLANATION OF GENERAL TERMS AND CALCULATION METHODS |
| IEC 60268-11:1987 | Sound system equipment. Part 11: Application of connectors for the interconnection of sound system components |
| CFR 47(PTS80-END) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| IEC 60268-5:2003+AMD1:2007 CSV | Sound system equipment - Part 5: Loudspeakers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.