I.S. EN 60068-2-21:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES
Hardcopy , PDF
25-09-2021
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Test Ua[1]: tensile
3.1 Object
3.2 General description
3.3 Preconditioning
3.4 Initial measurements
3.5 Test method
3.6 Final measurements
3.7 Information to be given in the relevant specification
4 Test Ua[2]: thrust
4.1 Object
4.2 General description
4.3 Preconditioning
4.4 Initial measurements
4.5 Test method
4.6 Final measurements
4.7 Information to be given in the relevant specification
5 Test Ub: bending
5.1 Object
5.2 General description
5.3 Preconditioning
5.4 Initial measurements
5.5 Test method
5.6 Final measurements
5.7 Information to be given in the relevant specification
6 Test Uc: torsion
6.1 Object
6.2 Preconditioning
6.3 Initial measurements
6.4 Test method
6.5 Final measurements
6.6 Information to be given in the relevant specification
7 Test Ud: torque
7.1 Object
7.2 General description
7.3 Preconditioning
7.4 Initial measurements
7.5 Test method
7.6 Final measurements
7.7 Information to be given in the relevant specification
8 Test Ue: robustness of terminations for SMD in the mounted state
8.1 Object
8.2 General description
8.3 Mounting
8.4 Initial measurements
8.5 Test methods
8.6 Final measurements
8.7 Information to be given in the relevant specification
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Bibliography
Pertains to all electrical and electronic components whose terminations or integral mounting devices are liable to be submitted to stresses during normal assembly or handling operations.
| DevelopmentNote |
Supersedes I.S. 1116. (01/2012) For CENELEC adoptions of IEC publications, please check www.iec.ch to be sure that you have any corrigenda that may apply. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 60068-2-21:2007 | Identical |
| DIN EN 60068-2-21:2007-01 | Identical |
| NF EN 60068-2-21 : 2013 | Identical |
| IEC 60068-2-21:2006 | Identical |
| BS EN 60068-2-21:2006 | Identical |
| EN 60068-2-21:2006 | Identical |
| SN EN 60068-2-21 : 2006 | Identical |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| HD 323.2.20 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST T - SOLDERING |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
| IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
| IEC 61190-1-2:2014 | Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| EN 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| IEC 60068-2-61:1991 | Environmental testing - Part 2-61: Test methods - Test Z/ABDM:Climatic sequence |
| IEC 61191-2:2017 | Printed board assemblies - Part 2: Sectional specification - Requirements for surface mount soldered assemblies |
| ISO 9453:2014 | Soft solder alloys Chemical compositions and forms |
| EN 60068-2-61:1993 | Environmental testing - Part 2: Test methods - Test Z/ABDM: Climatic sequence |
| EN 61190-1-2:2014 | Attachment materials for electronic assembly - Part 1-2: Requirements for soldering pastes for high-quality interconnects in electronics assembly |
| EN 29453 : 1993 | SOFT SOLDER ALLOYS - CHEMICAL COMPOSITIONS AND FORMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.