I.S. EN 521:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
SPECIFICATIONS FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - PORTABLE VAPOUR PRESSURE LIQUEFIED PETROLEUM GAS APPLIANCES
Hardcopy , PDF
31-10-2019
English
21-04-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 Classification of gases:
4.2 Classification of appliances:
5 Safety requirements
5.1 General
5.2 Conversion to different gases
5.3 Materials
5.4 Assembly, cleaning and maintenance
5.5 Strength and stability
5.6 Soundness of the gas circuit assembly
5.7 Connections
5.8 Transport, fixing and mobility devices
5.9 Taps
5.10 Control handles
5.11 Injectors
5.12 Ignition devices
5.13 Flame supervision devices
5.14 Burners and radiant elements
5.15 Grids
5.16 Turnspit
5.17 Fireguards for heating appliances
5.18 Locations and compartments for refillable gas
containers
5.19 Verification of the heat inputs
5.20 Resistance to overheating
5.21 Temperature of various parts of the appliance
5.22 Temperature of panels (floors, walls or ceilings)
5.23 Ignition, crosslighting and flame stability
5.24 Resistance to draught
5.25 Resistance to liquid spillage
5.26 Combustion
5.27 Accumulation of un-burnt gas
5.28 Safety at high temperature
5.29 Sooting - Condensation
5.30 Rational use of energy
6 Test methods
6.1 General
6.2 Conversion to different gases
6.3 Materials
6.4 Assembly, cleaning and maintenance
6.5 Strength and stability
6.6 Soundness of the gas circuit assembly
6.7 Connections
6.8 Transport, fixing and mobility devices
6.9 Taps
6.10 Control handles
6.11 Injectors
6.12 Ignition devices
6.13 Flame supervision devices
6.14 Burners and radiant elements
6.15 Grids
6.16 Turnspit
6.17 Fireguards for heating appliances
6.18 Locations and compartments for refillable
gas containers
6.19 Verification of heat inputs
6.20 Resistance to overheating
6.21 Temperatures of the various parts of the
appliance
6.22 Temperature of panels (floor, wall or ceiling)
6.23 Ignition, crosslighting and flame stability
6.24 Resistance to draught
6.25 Resistance to liquid spillage
6.26 Combustion
6.27 Accumulation of un-burnt gases
6.28 Safety at high temperature
6.29 Sooting - condensation
6.30 Rational use of energy
7 Marking
7.1 Appliance marking
7.2 Packaging marking
8 Instructions for use, maintenance and assembly
Annex A (normative) Characteristics of test vessels
Annex B (normative) Tests on needle valves
B.1 Resistance to temperature
B.2 Endurance
Annex C (informative) Examples of authorized solutions
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements
or other provisions of EU Directive
Bibliography
Describes the construction and performance characteristics related to safety and the rational use of energy of portable appliances burning liquefied petroleum gases at the vapour pressure within the gas container.
DocumentType |
Standard
|
Pages |
68
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
NF EN 521 : 2006 | Identical |
EN 521:2006 | Identical |
NS EN 521 : 2ED 2006 | Identical |
UNI EN 521 : 2006 | Identical |
DIN EN 521:2016-03 (Draft) | Identical |
UNE-EN 521:2006 | Identical |
ONORM EN 521 : 2006 | Identical |
NEN EN 521 : 2006 | Identical |
BS EN 521:2006 | Identical |
SN EN 521 : 2006 | Identical |
NBN EN 521 : 2006 | Identical |
DIN EN 521:2006-05 | Identical |
EN 417:2012 | Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
ISO 9994:2005 | Lighters Safety specification |
EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
EN 549:1994 | Rubber materials for seals and diaphragms for gas appliances and gas equipment |
ISO 301:2006 | Zinc alloy ingots intended for castings |
EN 30-1-1:2008+A3:2013 | Domestic cooking appliances burning gas - Part 1-1: Safety - General |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.