I.S. EN 50463-2:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 2: ENERGY MEASURING
Hardcopy , PDF
01-02-2020
24-10-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, abbreviations and symbols
4 Requirements
5 Conformity assessment
Annex A (normative) - Test with magnetic induction
of external origin
Annex B (normative) - EMF Configurations
Annex C (informative) - Expressing EMF accuracy
Annex D (informative) - Recommendations for re-verification
and defining of its regime
Annex E (informative) - Durability test
Annex ZZ (informative) - Relationship between this European
Standard and the Essential Requirements of Directive
2008/57/EC
Bibliography
This European Standard covers the requirements applicable to the Energy Measurement Function (EMF) of an Energy Measurement System (EMS) for use on board traction units for measurement of energy supplied directly from/to the Contact Line system.
| Committee |
CLC/TC 9X
|
| DevelopmentNote |
Supersedes I.S. EN 50463. (02/2013)
|
| DocumentType |
Standard
|
| Pages |
198
|
| ProductNote |
The date of any NSAIprevious adoption may not matchthe date of its original CEN/CENELEC document THIS STANDARD ALSO REFERS TO :EN 50121-3-2:2015,EN 50163:2004,EN 50388:2012, EN 61373:2010
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN 50463-2:2017 | Identical |
| EN 62059-32-1:2012 | Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature |
| IEC 60028:1925 | International standard of resistance for copper |
| IEC 61869-3:2011 | Instrument transformers - Part 3: Additional requirements for inductive voltage transformers |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| EN 60077-4:2003 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
| EN 50463-3:2017 | Railway applications - Energy measurement on board trains - Part 3: Data handling |
| EN 60359:2002 | Electrical and electronic measurement equipment - Expression of performance |
| EN 50463-4:2017 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| IEC 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 60085:2008 | Electrical insulation - Thermal evaluation and designation |
| EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60529:1991 | Degrees of protection provided by enclosures (IP Code) |
| EN 50123-1:2003 | Railway applications - Fixed installations - D.C. switchgear - Part 1: General |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| EN 50124-1:2001 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| EN 50121-1:2017 | Railway applications - Electromagnetic compatibility - Part 1: General |
| EN 61869-3 : 2011 | INSTRUMENT TRANSFORMERS - PART 3: ADDITIONAL REQUIREMENTS FOR INDUCTIVE VOLTAGE TRANSFORMERS (IEC 61869-3:2011) |
| IEC 62052-11:2003+AMD1:2016 CSV | Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| EN 50463-5:2017 | Railway applications - Energy measurement on board trains - Part 5: Conformity assessment |
| EN 60044-8:2002 | Instrument transformers - Part 8: Electronic current transformers |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| IEC 60121:1960 | Recommendation for commercial annealed aluminium electrical conductor wire |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| IEC 60359:2001 | Electrical and electronic measurement equipment - Expression of performance |
| EN 50388 : 2012 COR 2013 | RAILWAY APPLICATIONS - POWER SUPPLY AND ROLLING STOCK - TECHNICAL CRITERIA FOR THE COORDINATION BETWEEN POWER SUPPLY (SUBSTATION) AND ROLLING STOCK TO ACHIEVE INTEROPERABILITY |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| EN 45545-5:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
| IEC 62059-32-1:2011 | Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the stability of metrological characteristics by applying elevated temperature |
| EN 50463-1:2017 | Railway applications - Energy measurement on board trains - Part 1: General |
| IEC 60077-4:2003 | Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.