I.S. EN 50216-12:2011
Current
The latest, up-to-date edition.
POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS
Hardcopy , PDF
English
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Identification
6 Tests
7 Transport and storage
8 Installation and operation, operational performance
9 Technical documentation
Annex A (normative) - Ordering designations
Annex B (informative) - Performance of the fans
Annex C (informative) - Design example
Bibliography
Specifies the dimensions and requirements for ensuring fan interchangeability and uniform fan assembly.
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 50216-12:2011 | Identical |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| ISO 13348:2007 | Industrial fans — Tolerances, methods of conversion and technical data presentation |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| EN 60034-1:2010/corrigendum Oct. 2010 | ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| EN 50216-6:2002 | Power transformer and reactor fittings - Part 6: Cooling equipment - Removable radiators for oil-immersed transformers |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 5801:2017 | Fans - Performance testing using standardized airways (ISO 5801:2017) |
| ISO 5801:2017 | Fans — Performance testing using standardized airways |
| EN 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| EN 50216-10:2009 | Power transformer and reactor fittings - Part 10: Oil-to-air heat exchangers |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| EN 50262 : 1998 AMD 2 2004 | CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| EN 22768-1:1993 | General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) |
| DIN 45635-1:1984-04 | MEASUREMENT OF AIRBORNE NOISE EMITTED BY MACHINES; ENVELOPING SURFACE METHOD; BASIC REQUIREMENTS FOR 3 ACCURACY CLASSES |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 60076-1:2011 | POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011) |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 13347-3:2004 | Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods |
| ISO 13347-1:2004 | Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 1: General overview |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 60721-3-4:1995/A1:1997 | CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 4: STATIONARY USE AT NON-WEATHER-PROTECTED LOCATIONS |
| EN 50216-1:2002 | Power transformer and reactor fittings - Part 1: General |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.