I.S. EN 50155:2017-11
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRONIC EQUIPMENT
Available format(s)
Hardcopy , PDF
Superseded date
31-08-2021
Superseded by
Language(s)
English
Published date
01-11-2017
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 General requirements
5 Electrical service conditions
6 Reliability, maintainability and expected useful life
7 Design
8 Non-railway designed electronic equipment
9 Components
10 Construction
11 Safety
12 Documentation
13 Testing
Annex A (informative) - List of default requirements of
EN 50155 and related clauses
Annex B (informative) - Testing approach
Annex C (informative) - Severity of the service conditions
in different rolling stock locations
Annex D (informative) - Example of test report compliance
Summary
Annex F (informative) - Design guidelines for electronic hardware
used on board of rolling stock
Annex G (informative) - Non-railway designed electronic equipment
Annex H (informative) - Paragraphs with Agreements between the
involved Parties
Annex ZZ (informative) - Relationship between this European Standard
and the Essential Requirements of EU Directive 2008/57/EC
Bibliography
This European Standard applies to all electronic equipment for control, regulation, protection,
diagnostic, energy supply, etc. installed on rail vehicles.
| DocumentType |
Standard
|
| Pages |
0
|
| ProductNote |
Reproducible but contains colour pages, advice dispatch. (Shilp 12/2017) This standard also referes : IPC-7711B/7721B:2007
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS EN 50155:2017 | Identical |
| NEN EN 50155 : 2017 | Identical |
| NBN EN 50155 : 2007 | Identical |
| NF EN 50155 : 2007 | Identical |
| EN 50155:2017 | Identical |
| NASA HDBK 4008 : 2013 | PROGRAMMABLE LOGIC DEVICES (PLD) HANDBOOK |
| IPC A 600 : H | ACCEPTABILITY OF PRINTED BOARDS |
| EN 60352-2:2006/A1:2013 | SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| IEC 61123:1991 | Reliability testing - Compliance test plans for success ratio |
| IPC 2220 : LATEST | IPC 2220 FAMILY OF DESIGN DOCUMENTS |
| IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
| IEC 60384-14:2013+AMD1:2016 CSV | Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
| IEC 60605-4:2001 | Equipment reliability testing - Part 4: Statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals |
| IEC 60319:1999 | Presentation and specification of reliability data for electronic components |
| EN 60300-3-2:2005 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| EN 50121-3-2:2016 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
| EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 61014:2003 | Programmes for reliability growth |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60605-6:2007 | Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| IEC 61070:1991 | Compliance test procedures for steady-state availability |
| EN 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
| IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| MIL-HDBK-781 Revision A:1996 | RELIABILITY TEST METHODS, PLANS, AND ENVIRONMENTS FOR ENGINEERING DEVELOPMENT, QUALIFICATION AND PRODUCTION |
| IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
| EN 61163-1 : 2006 | RELIABILITY STRESS SCREENING - PART 1: REPAIRABLE ASSEMBLIES MANUFACTURED IN LOTS |
| IEC 61163-1:2006 | Reliability stress screening - Part 1: Repairable assemblies manufactured in lots |
| IEC 61082-1:2014 RLV | Preparation of documents used in electrotechnology - Part 1: Rules |
| EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| IEC TR 62380:2004 | Reliability data handbook - Universal model for reliability prediction of electronics components, PCBs and equipment |
| EN 50657:2017 | Railways Applications - Rolling stock applications - Software on Board Rolling Stock |
| ISO/IEC/IEEE 15289:2017 | Systems and software engineering Content of life-cycle information items (documentation) |
| IPC A 610 : F | ACCEPTABILITY OF ELECTRONIC ASSEMBLIES |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| IPC 4101 : D | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| EN 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials, clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| IEC 61124:2012 | Reliability testing - Compliance tests for constant failure rate and constant failure intensity |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| EN 50126-1:2017 | Railway Applications - The Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS) - Part 1: Generic RAMS Process |
| IEC 60605-2:1994 | Equipment reliability testing - Part 2: Design of test cycles |
| EN 45545-2:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components |
| EN 61082-1:2015 | Preparation of documents used in electrotechnology - Part 1: Rules |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| ISO 9001:2015 | Quality management systems — Requirements |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| EN 61014:2003 | Programmes for reliability growth |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| EN 60068-2-11:1999 | Environmental testing - Part 2: Tests - Test Ka: Salt mist |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 61249-2-22:2005 | Materials for printed boards and other interconnecting structures - Part 2-22: Reinforced base materials clad and unclad - Modified non-halogenated epoxide woven E-glass laminated sheets of defined flammability (vertical burning test), copper-clad |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO/IEC 90003:2014 | Software engineering Guidelines for the application of ISO 9001:2008 to computer software |
| EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
| IEC 60077-1:2017 | Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules |
| EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
| IEC 61000-4-29:2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| IPC 6013 : C | QUALIFICATION AND PERFORMANCE SPECIFICATION FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS |
| IPC 2581 : B | GENERIC REQUIREMENTS FOR PRINTED BOARD ASSEMBLY PRODUCTS MANUFACTURING DESCRIPTION DATA AND TRANSFER METHODOLOGY |
| IPC 2223 : C | SECTIONAL DESIGN STANDARD FOR FLEXIBLE/RIGID-FLEXIBLE PRINTED BOARDS |
| EN 61124:2012 | RELIABILITY TESTING - COMPLIANCE TESTS FOR CONSTANT FAILURE RATE AND CONSTANT FAILURE INTENSITY (IEC 61124:2012) |
| IEC 62506:2013 | Methods for product accelerated testing |
| EN 62506 : 2013 | METHODS FOR PRODUCT ACCELERATED TESTING (IEC 62506:2013) |
| EN 61000-4-29:2000 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
| IEC 60300-3-5:2001 | Dependability management - Part 3-5: Application guide - Reliability test conditions and statistical test principles |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.