I.S. EN 203-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS HEATED CATERING EQUIPMENT - PART 1: GENERAL SAFETY RULES
Hardcopy , PDF
27-01-2022
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Constructional requirements
6 Performance requirements
7 Test conditions
8 Designation
9 Marking and instructions
Annex A (informative) - National situations
Annex B (normative) - Use of symbols on appliances
and packaging
Annex C (informative) - Trilingual list of appliances in
the scope of EN 203-1 and corresponding Part 2
Annex D (normative) - Non pneumatic air/gas control
devices
Annex E (informative) - Composition of the gas circuit
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements
or other provisions of EU Directives
Bibliography
Describes the general requirements and the constructional and operating characteristics relating to safety, marking, and the associated test methods for gas heated commercial catering and bakery appliances.
| DocumentType |
Standard
|
| Pages |
90
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| SN EN 203-1 : 2014 COR 2016 | Identical |
| BS EN 203-1:2014 | Identical |
| DIN EN 203-1:2014-07 | Identical |
| UNI EN 203-1 : 2014 | Identical |
| NBN EN 203-1 : 2014 | Identical |
| NEN EN 203-1 : 2014 C1 2016 | Identical |
| NS EN 203-1 : 2014 AC 2016 | Identical |
| NF EN 203-1 : 2014 | Identical |
| ONORM EN 203-1 : 2016 | Identical |
| IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| EN 10226-2:2005 | Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation |
| EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 3166-1:2014 | Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013) |
| EN 161:2011+A3:2013 | Automatic shut-off valves for gas burners and gas appliances |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 125:2010+A1:2015 | Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices |
| EN 126:2012 | Multifunctional controls for gas burning appliances |
| CEN/TR 1749:2014 | European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types) |
| IEC 60730-2-1:1989 | Automatic electrical controls for household and similar use. Part 2: Particular requirements for electrical controls for electrical household appliances |
| EN 60335-2-102:2016 | Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| EN 60730-2-1 : 97 AMD 11 2005 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-1: PARTICULAR REQUIREMENTS FOR ELECTRICAL CONTROLS FOR ELECTRICAL HOUSEHOLD APPLIANCES |
| ISO 3166-1:2013 | Codes for the representation of names of countries and their subdivisions Part 1: Country codes |
| EN 1443:2003 | Chimneys - General requirements |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| EN 298:2012 | Automatic burner control systems for burners and appliances burning gaseous or liquid fuels |
| EN 1856-1:2009 | Chimneys - Requirements for metal chimneys - Part 1: System chimney products |
| EN 1106:2010 | Manually operated taps for gas burning appliances |
| ISO 301:2006 | Zinc alloy ingots intended for castings |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 257:2010 | Mechanical thermostats for gas-burning appliances |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.