I.S. EN 1982:2017
Current
The latest, up-to-date edition.
COPPER AND COPPER ALLOYS - INGOTS AND CASTINGS
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling and testing frequency
8 Test methods
9 Declaration of conformity and inspection documentation
10 Marking, labelling, packaging
Annex A (informative) - Guidance for the ordering and supply
of copper and copper alloy castings
Annex B (informative) - Optional supplementary testing
procedures for ingots and castings
Annex C (normative) - Unalloyed copper
Annex D (normative) - Copper-chromium alloys
Annex E (normative) - Copper-zinc alloys
Annex F (normative) - Copper-zinc-aluminium alloys
Annex G (normative) - Copper-zinc-lead alloys
Annex H (normative) - Copper-zinc-silicon alloys
Annex I (normative) - Other copper-zinc alloys
Annex J (normative) - Copper-tin alloys
Annex K (normative) - Copper-tin-zinc-lead alloys
Annex L (normative) - Copper-tin-lead alloys
Annex M (normative) - Copper-aluminium alloys
Annex N (normative) - Copper-manganese alloys
Annex O (normative) - Copper-nickel alloys
Annex P (normative) - Copper-silicon-zinc alloys
Annex ZA (informative) - Relationship between this European
Standard and the Essential Safety Requirements
of Directive 2014/68/EU aimed to be covered
Bibliography
Defines the composition, mechanical properties and other relevant characteristics of copper and copper alloys.
| DocumentType |
Standard
|
| Pages |
82
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 1982:2009 | Identical |
| BS EN 1982:2017 | Identical |
| NEN EN 1982 : 2017 | Identical |
| NBN EN 1982 : 2008 | Identical |
| EN 1982:2017 | Identical |
| UNI EN 1982 : 2008 | Identical |
| DIN EN 1982:2016-01 (Draft) | Identical |
| UNE-EN 1982:2018 | Identical |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6509-1:2014 | Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 1981:2003 | Copper and copper alloys - Master alloys |
| EN 1370:2011 | Founding - Examination of surface condition |
| EN ISO 6509-1:2014 | Corrosion of metals and alloys - Determination of dezincification resistance of copper alloys with zinc - Part 1: Test method (ISO 6509-1:2014) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| 2014/68/EU : 2014 COR 1 2015 | DIRECTIVE 2014/68/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 MAY 2014 ON THE HARMONISATION OF THE LAWS OF THE MEMBER STATES RELATING TO THE MAKING AVAILABLE ON THE MARKET OF PRESSURE EQUIPMENT TEXT WITH EEA RELEVANCE |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.