I.S. EN 16689:2017
Current
The latest, up-to-date edition.
PROTECTIVE CLOTHING FOR FIREFIGHTERS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE CLOTHING FOR TECHNICAL RESCUE
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General clothing design
5 Sampling and pre-treatment
6 Thermal requirements
7 Mechanical and other requirements
8 Marking
9 Information supplied by the manufacturer
Annex A (normative) - Uncertainty of measurement
Annex B (normative) - Determination of property
values
Annex C (informative) - Guidelines for clothing
compatibility
Annex D (informative) - Checking of basic ergonomic
features of protective clothing
Annex ZA (informative) - Relationship between this
European Standard and the essential requirements
of EU Directive 89/686/EEC aimed to be covered
Defines the minimum requirements for technical rescue clothing.
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| EN 16689:2017 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN ISO 13937-2:2000 | Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN ISO 14116:2015 | Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2015) |
| ISO 13688:2013 | Protective clothing — General requirements |
| ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
| EN ISO 13938-2:1999 | Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
| ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
| ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| EN ISO 4920:2012 | Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012) |
| ISO 14116:2015 | Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing |
| EN ISO 12947-2:2016 | Textiles - Determination of the abrasion resistance of fabrics by the Martindale method - Part 2: Determination of specimen breakdown (ISO 12947-2:2016) |
| EN ISO 5077:2008 | Textiles - Determination of dimensional change in washing and drying (ISO 5077:2007) |
| EN ISO 12127-1:2015 | Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015) |
| ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN ISO 13935-2:2014 | Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 2: Determination of maximum force to seam rupture using the grab method (ISO 13935-2:2014) |
| ISO 17493:2016 | Clothing and equipment for protection against heat Test method for convective heat resistance using a hot air circulating oven |
| ISO 12127-1:2015 | Clothing for protection against heat and flame Determination of contact heat transmission through protective clothing or constituent materials Part 1: Contact heat produced by heating cylinder |
| ISO 16604:2004 | Clothing for protection against contact with blood and body fluids Determination of resistance of protective clothing materials to penetration by blood-borne pathogens Test method using Phi-X 174 bacteriophage |
| EN ISO 13938-1:1999 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
| ISO 20471:2013 | High visibility clothing — Test methods and requirements |
| ISO 11092:2014 | Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) |
| EN ISO 15025:2016 | Protective clothing - Protection against flame - Method of test for limited flame spread (ISO 15025:2016) |
| EN ISO 11092:2014 | Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014) |
| EN ISO 13688:2013 | Protective clothing - General requirements (ISO 13688:2013) |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| ISO 4920:2012 | Textile fabrics — Determination of resistance to surface wetting (spray test) |
| ISO 12947-2:2016 | Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determination of specimen breakdown |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| EN 1149-5:2008 | Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| EN ISO 6942:2002 | Protective clothing - Protection against heat and fire - Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat (ISO 6942:2002) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.