I.S. EN 15316-4-8:2017
Current
The latest, up-to-date edition.
ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-8: SPACE HEATING GENERATION SYSTEMS, AIR HEATING AND OVERHEAD RADIANT HEATING SYSTEMS, INCLUDING STOVES (LOCAL), MODULE M3-8-8
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and subscripts
5 Description of the methods
6 On/off heaters
7 High-low and modulating heaters
8 Stoves and local heaters
9 Quality control
Annex A (normative) - Template for choices, input data
and references
Annex B (informative) - Default choices, input data
and references
Annex C (informative) - Equivalence between the data
specification according to draft Ecodesign regulation
on solid fuel local heaters and the required product
data input for this module
Bibliography
Defines the: - required inputs; - calculation method; - resulting outputs, for space heating generation by: - air heating systems, including control; - overhead radiant heating systems for non-domestic use, including control; and - stoves and local heaters for residential use.
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 15316-4-8:2017 | Identical |
| EN 416-2:2006 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Rational use of energy |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| CEN/TS 16629:2014 | Energy Performance of Buildings - Detailed Technical Rules for the set of EPB-standards |
| EN 419-2:2006 | Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy |
| EN 778:2009 | Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products |
| CEN/TS 16628:2014 | Energy Performance of Buildings - Basic Principles for the set of EPB standards |
| EN 777-4:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety |
| EN 777-1:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety |
| EN 14785:2006 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| EN 1196:2011 | Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensing air heaters |
| ISO 52000-1:2017 | Energy performance of buildings — Overarching EPB assessment — Part 1: General framework and procedures |
| EN 416-1:2009 | Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety |
| PREN 16510-2-6 : DRAFT 2014 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-6 APPLIANCES FIRED BY WOOD PELLETS |
| PREN 16510-2-2 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-2: INSET APPLIANCES INCLUDING OPEN FIRES |
| PREN 16510-2-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 2-1: ROOMHEATERS |
| EN 1020:2009 | Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net heat input of 300 kW incorporating a fan to assist transportation of combustion air or combustion products |
| EN 15316-2:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 |
| EN ISO 52000-1:2017 | Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017) |
| EN 621:2009 | Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kW, without a fan to assist transportation of combustion air and/or combustion products |
| EN 15250:2007 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| EN 777-2:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety |
| EN 1319:2009 | Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kW |
| CEN/TR 15316-6-9:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8 |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| EN 777-3:2009 | Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety |
| EN 419-1:2009 | Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.