I.S. EN 15288-2:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION
Hardcopy , PDF
10-01-2019
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
4.1 Swimming pool Type 1
4.2 Swimming pool Type 2
4.3 Swimming pool Type 3
5 Organisational requirements
5.1 General operational procedure
5.2 Pool safety procedures/instructions
6 Operational requirements
6.1 Operational requirements for safe working practices for
a swimming pool and its equipment
6.2 Operational requirements for management of pool staff
6.3 Operational requirements for emergency procedures
7 Instruction to the users
7.1 General
7.2 Information to the users
Annex A (normative) Dye test - Operational Instructions
Annex B (informative) Samples of accident recording form
B.1 Sample of accident recording form from the Netherlands
B.2 Sample of accident report form from United Kingdom
Bibliography
Describes safety requirements for operating of classified pools according to clause 4. It is intended for those concerned with the operation and management of classified swimming pools. It also provides guidance about the risks for staff and users associated with public swimming pools, by identifying the precautions needed to achieve safety.
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 15288-2:2008 | Identical |
| EN 14387:2004+A1:2008 | Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking |
| EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
| CEN/CLC Guide 6:2014 | Guide for addressing accessibility in standards |
| 89/686/EEC : 1989 AMD 5 2012 | COUNCIL DIRECTIVE OF 21 DECEMBER 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO PERSONAL PROTECTIVE EQUIPMENT |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 1146:2005 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape - Requirements, testing, marking |
| EN 132:1998 | Respiratory protective devices - Definitions of terms and pictograms |
| EN 13451-11:2014 | Swimming pool equipment - Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads |
| EN 134:1998 | Respiratory protective devices - Nomenclature of components |
| EN 13451-7:2001 | Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN 13451-4:2014 | Swimming pool equipment - Part 4: Additional specific safety requirements and test methods for starting platforms |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 133:2001 | Respiratory protective devices - Classification |
| EN 12911:2013 | Products used for treatment of water intended for human consumption - Manganese greensand |
| EN 13451-1:2011+A1:2016 | Swimming pool equipment - Part 1: General safety requirements and test methods |
| ISO 7001:2007 | Graphical symbols — Public information symbols |
| BS PAS 39(2003) : 2003 | MANAGEMENT OF PUBLIC SWIMMING POOLS - WATER TREATMENT SYSTEMS, WATER TREATMENT PLANT AND HEATING AND VENTILATION SYSTEMS - CODE OF PRACTICE |
| EN 12671:2016 | Chemicals used for treatment of water intended for human consumption - Chlorine dioxide generated in situ |
| GUV-R 1/111 : 1984 | |
| EN 13451-5:2014 | Swimming pool equipment - Part 5: Additional specific safety requirements and test methods for lane lines and dividing line |
| EN 13451-6:2001 | Swimming pool equipment - Part 6: Additional specific safety requirements and test methods for turning boards |
| EN 340:2003 | Protective clothing - General requirements |
| EN 170:2002 | Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended use |
| EN 135:1998 | Respiratory protective devices - List of equivalent terms |
| EN 13451-10:2014 | Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment |
| BS PAS 65(2004) : 2004 | MANAGEMENT OF PUBLIC SWIMMING POOLS - GENERAL MANAGEMENT - CODE OF PRACTICE |
| EN 12083:1998 | Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) - Particle filters, gas filters, and combined filters - Requirements, testing, marking |
| EN 1836:2005+A1:2007 | Personal eye-equipment - Sunglasses and sunglare filters for general use and filters for direct observation of the sun |
| ISO 20712-1:2008 | Water safety signs and beach safety flags Part 1: Specifications for water safety signs used in workplaces and public areas |
| EN 13451-8:2001 | Swimming pool equipment - Part 8: Additional specific safety requirements and test methods for leisure water features |
| EN 13451-2:2015 | Swimming pool equipment - Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends |
| EN 13451-3:2011+A3:2016 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.