I.S. EN 15129:2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ANTI-SEISMIC DEVICES
Hardcopy , PDF
17-06-2018
English
01-01-2009
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 General design rules
5 Rigid connection devices
6 Displacement Dependent Devices
7 Velocity Dependent Devices
8 Isolators
9 Combinations of Devices
10 Assessment and verification of constancy of
performance - AVCP
11 Installation
12 In-service inspection
Annex A (informative) - Commentary to Clause 1: Scope
Annex B (informative) - Commentary to Clause 4: General
design rules
Annex C (informative) - Commentary to Clause 5: Rigid
connection devices
Annex D (informative) - Commentary to Clause 6:
Displacement Dependent Devices
Annex E (informative) - Commentary to Clause 7: Velocity
Dependent Devices
Annex F (informative) - Commentary to Clause 8: Isolators
Annex G (normative) - Equipment for combined compression
and shear test and data analysis
Annex H (informative) - Design of Connections for Devices
Annex I (informative) - Method for calculating pressure
distributions on curved sliding surfaces
Annex J (informative) - Lambda-Factors for common isolator types
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No.305/2011
Bibliography
Contains the design of devices that are provided in structures, with the aim of modifying their response to the seismic action.
| DocumentType |
Standard
|
| Pages |
161
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 15129:2018 | Identical |
| ISO 22762-1:2010 | Elastomeric seismic-protection isolators Part 1: Test methods |
| ISO 4526:2004 | Metallic coatings Electroplated coatings of nickel for engineering purposes |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| EN 1337-1:2000 | Structural bearings - Part 1: General design rules |
| 305/2011 : 2011 AMD 2 2014 | REGULATION (EU) NO 305/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 9 MARCH 2011 LAYING DOWN HARMONISED CONDITIONS FOR THE MARKETING OF CONSTRUCTION PRODUCTS AND REPEALING COUNCIL DIRECTIVE 89/106/EEC (TEXT WITH EEA RELEVANCE) |
| ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
| ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
| EN 10279:2000 | Hot rolled steel channels - Tolerances on shape, dimensions and mass |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| EN 1337-2:2004 | Structural bearings - Part 2: Sliding elements |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 1431-1:2012 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing |
| ISO 14737:2015 | Carbon and low alloy cast steels for general applications |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 4527:2003 | Metallic coatings - Autocatalytic (electroless) nickel-phosphorus alloy coatings - Specification and test methods (ISO 4527:2003) |
| ISO 4527:2003 | Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods |
| ISO 22762-3:2010 | Elastomeric seismic-protection isolators Part 3: Applications for buildings Specifications |
| EN 1337-3:2005 | Structural bearings - Part 3: Elastomeric bearings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| ISO 6158:2011 | Metallic and other inorganic coatings Electrodeposited coatings of chromium for engineering purposes |
| ISO 6446:1994 | Rubber products — Bridge bearings — Specification for rubber materials |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| EN 1337-7:2004 | Structural bearings - Part 7: Spherical and cylindrical PTFE bearings |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN ISO 6158:2011 | Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) |
| ISO/TS 22762-4:2014 | Elastomeric seismic-protection isolators Part 4: Guidance on the application of ISO 22762-3 |
| EN ISO 4526:2004 | Metallic coatings - Electroplated coatings of nickel for engineering purposes (ISO 4526:2004) |
| ISO 22762-2:2010 | Elastomeric seismic-protection isolators Part 2: Applications for bridges Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.