I.S. EN 14475:2006
Current
The latest, up-to-date edition.
EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
Hardcopy , PDF
English
01-01-2006
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Information needed for construction
5 Geotechnical investigations
6 Materials and products
7 Design considerations
8 Execution
9 Supervision, testing and monitoring
10 Records
11 Specific requirements
Annex A (informative) Typical use of fill types depending
on application, reinforcement and facing
Annex B (informative)
Annex C (informative) Facing units and systems
Annex D (informative) Some typical reinforcement forms
Annex E (informative) Steel reinforcement
Annex F (informative) Recommendations for facing units
Bibliography
Describes engineered fills that are reinforced by the inclusion of horizontal or sub-horizontal reinforcement placed between layers of fill during construction.
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 14475:2006 | Identical |
| NEN EN 14475 : 2006 C1 2006 | Identical |
| BS EN 14475:2006 | Equivalent |
| DIN EN 14475:2006-04 | Identical |
| NBN EN 14475 : 2006 COR 2006 | Identical |
| NS EN 14475 : 2006 AC 2006 | Identical |
| NF EN 14475 : 2007 | Identical |
| EN 14475:2006 | Equivalent |
| EN 10223-4:2012 | Steel wire and wire products for fencing and netting - Part 4: Steel wire welded mesh fencing |
| EN 10218-1:2012 | Steel wire and wire products - General - Part 1: Test methods |
| ISO 2063:2005 | Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 10079:2007 | Definition of steel products |
| EN 10025-4:2004 | Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels |
| EN 13251:2016 | Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures |
| EN 10218-2:2012 | Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
| ISO 10320:1999 | Geotextiles and geotextile-related products — Identification on site |
| EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 12224:2000 | Geotextiles and geotextile-related products - Determination of the resistance to weathering |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN ISO 10320:1999 | Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 10326:2004 | Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| ISO 12957-1:2005 | Geosynthetics — Determination of friction characteristics — Part 1: Direct shear test |
| EN ISO 13431:1999 | Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) |
| ENV ISO 10722-1 : 1998 | GEOTEXTILES AND GEOTEXTILES-RELATED PRODUCTS - PROCEDURE FOR SIMULATING DAMAGE DURING INSTALLATION - PART 1: INSTALLATION IN GRANULAR MATERIALS |
| EN 12225:2000 | Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| ISO/TR 10722-1:1998 | Geotextiles and geotextile-related products — Procedure for simulating damage during installation — Part 1: Installation in granular materials |
| ISO 13431:1999 | Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.