I.S. EN 14161:2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED)
24-02-2021
01-01-2011
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 General
5 Pipeline system design
6 Design of pipeline and primary piping
7 Design of stations and terminals
8 Materials and coatings
9 Corrosion management
10 Construction
11 Testing
12 Pre-commissioning and commissioning
13 Operation, maintenance and abandonment
Annex A (normative) - Safety evaluation of pipelines
Annex B (normative) - Supplementary requirements for
public safety of pipelines for category D
and E fluids on land
Annex C (informative) - Pipeline route selection process
Annex D (informative) - Examples of factors for routing
Considerations
Annex E (informative) - Scope of procedures for operation,
maintenance and emergencies
Annex F (informative) - Records and documentation
Bibliography
Describes requirements and gives recommendations for the design, materials, construction, testing, operation, maintenance and abandonment of pipeline systems used for transportation in the petroleum and natural gas industries.
| DevelopmentNote |
2011 Edition Re-Issued in May 2015 & incorporates AMD 1 2015. (05/2015)
|
| DocumentType |
Standard
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 14161 : 2011 + A1 2015 | Identical |
| SN EN 14161+A1:2015 | Identical |
| UNI EN 14161 : 2011 | Identical |
| NS EN 14161 : 2011 + A1 2015 | Identical |
| EN 14161:2011+A1:2015 | Identical |
| BS EN 14161 : 2011 | Identical |
| NF EN 14161 : 2013 + A1 2015 | Identical |
| NEN EN 14161 : 2011 + A1 2015 | Identical |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| ISO 21809-2:2014 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 2: Single layer fusion-bonded epoxy coatings |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ISO 16708:2006 | Petroleum and natural gas industries — Pipeline transportation systems — Reliability-based limit state methods |
| ISO 15590-1:2009 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
| EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| CEN/TS 15174:2006 | Gas supply systems - Guideline for safety management systems for natural gas transmission pipelines |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| ISO 3183:2012 | Petroleum and natural gas industries Steel pipe for pipeline transportation systems |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| ISO 15590-3:2004 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 15589-1:2015 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| MSS SP 25 : 2013 | STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
| API 1160 : 2013 | MANAGING SYSTEM INTEGRITY FOR HAZARDOUS LIQUID PIPELINES |
| NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
| ISO 15590-2:2003 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
| CEN/TS 15173:2006 | Gas supply systems - Frame of reference regarding Pipeline Integrity Management System (PIMS) |
| ISO 21809-4:2009 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE) |
| ASME B31.8S : 2016 | MANAGING SYSTEM INTEGRITY OF GAS PIPELINES |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEC 60079-14:2013 | Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
| MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| ISO 15156-1:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ISO 21809-5:2017 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 5: External concrete coatings |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ISO 14723:2009 | Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.