I.S. EN 14035-17:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
Hardcopy , PDF
04-10-2010
I.S. EN 15947-4:2010
I.S. EN 15947-5:2010
I.S. EN 15947-3:2010
I.S. EN 15947-5:2015
I.S. EN 15947-4:2015
I.S. EN 15947-3:2015
English
01-01-2004
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Construction
4.1 Means of ignition
4.2 Attachment of initial fuse
4.3 Resistance to ignition by an abrasive surface
4.4 Protection of ground spinners (category 1 ground
spinners only)
4.5 Protection of initial fuse (category 2 ground
spinners only)
4.5.1 General
4.5.2 Friction head
4.5.3 Protruding fuse
4.6 Materials of firework case
4.7 Integrity
4.8 Net explosive content
4.9 Striking surface
5 Performance
5.1 Initial fuse
5.2 Principal effects
5.3 Functioning
5.4 Explosions
5.5 Sound pressure level
5.6 Motion of the ground spinners
5.7 Burning matter
5.8 Projected debris
6 Primary pack or selection pack
7 Minimum labelling requirements
7.1 General
7.2 Type name and category
7.3 Safety information
7.3.1 General
7.3.2 Category 1 ground spinners with protruding fuse
7.3.3 Category 1 ground spinners with friction head
7.3.4 Category 2 ground spinners with protruding fuse
7.3.5 Category 2 ground spinners with friction head
7.4 Name, address and telephone number of manufacturer
or distributor or importer
7.5 Reference to this standard
7.6 Printing
7.6.1 Labelling
7.6.2 Type size
7.7 Marking of very small ground spinners
7.7.1 Reduced size
7.7.2 Reduced information
7.8 Additional information on the primary pack (if
applicable)
8 Test methods
8.1 Attachment of protruding fuse (type test and batch
test)
8.1.1 Apparatus
8.1.2 Procedure
8.2 Attachment of friction head (type test)
8.2.1 Apparatus
8.2.2 Procedure
8.3 Resistance to ignition by an abrasive surface (type
test and batch test)
8.3.1 Apparatus
8.3.2 Procedure
8.4 Performance (type test and batch test)
8.4.1 Test environment
8.4.2 Apparatus
8.4.3 Procedure
8.5 Determination of net explosive content (type test)
8.5.1 Apparatus
8.5.2 Procedure
8.6 Side ignition of initial fuse (type test)
8.6.1 Material
8.6.2 Test area
8.6.3 Apparatus
8.6.4 Test specimen
8.6.5 Procedure
8.7 Labelling (type test and batch test)
Annex A (normative) Type testing
Annex B (normative) Batch testing
Annex C (normative) Method for determination of
smouldering rate of cigarette
Annex D (informative) A-Deviations
Provides requirements for the construction, performance, primary packaging and labelling of ground spinners and the corresponding test methods.
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 14035-17:2004 | Identical |
| EN 61672-2:2013/A1:2017 | ELECTROACOUSTICS - SOUND LEVEL METERS - PART 2: PATTERN EVALUATION TESTS (IEC 61672-2:2013/A1:2017) |
| EN ISO 845:2009 | Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006) |
| EN 61672-1:2013 | Electroacoustics - Sound level meters - Part 1: Specifications |
| ISO 6344-3:2013 | Coated abrasives Grain size analysis Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
| ISO 21948:2001 | Coated abrasives Plain sheets |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.