I.S. EN 13859-1:2014
Current
The latest, up-to-date edition.
FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING
Hardcopy , PDF
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Product characteristics
5 Testing
6 Assessment and verification of the
constancy of performance - AVCP
7 Product data sheet
8 Marking, labelling and packaging
Annex A (normative) - Determination of tensile
properties
Annex B (normative) - Determination of resistance
to tearing
Annex C (normative) - Artificial ageing by exposure
to UV and heat
Annex D (normative) - Product type determination
and frequencies of testing for factory
production control
Annex E (informative) - Example of a product data sheet
Annex F (normative) - Determination of the watertightness
of seams
Annex ZA (informative) - Clauses of this European
Standard addressing provisions of the
EU Construction Products Regulation (CPR)
Bibliography
Defines the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs.
| DevelopmentNote |
Supersedes I.S. 36-1. (09/2016) Supersedes I.S. 36-2. (05/2017)
|
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN EN 13859-1 : 2014 | Identical |
| NF EN 13859-1 : 2014 | Identical |
| EN 13859-1:2014 | Identical |
| DIN EN 13859-1:2014-07 | Identical |
| BS EN 13859-1:2014 | Identical |
| NS EN 13859-1 : 2014 | Identical |
| NBN EN 13859-1 : 2014 | Identical |
| SN EN 13859-1 : 2014 | Identical |
| UNI EN 13859-1 : 2014 | Identical |
| UNE-EN 13859-1:2010 | Identical |
| S.R. 82:2017 | SLATING AND TILING - CODE OF PRACTICE |
| EN 1848-1:1999 | Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing |
| EN 13859-2:2014 | Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls |
| EN 1107-2:2001 | Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing |
| EN 1849-2:2009 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets |
| EN 1848-2:2001 | Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 1107-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 1928:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 12311-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
| EN 12310-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 1109:2013 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
| EN 1297:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 1296:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1849-1:1999 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing |
| EN 13111:2010 | Flexible sheets for waterproofing - Underlays for discontinuous roofing and walls - Determination of resistance to water penetration |
| EN 13416:2001 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
| EN 15976:2011 | Flexible sheets for waterproofing - Determination of emissivity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.