I.S. EN 13828:2003
Current
The latest, up-to-date edition.
BUILDING VALVES - MANUALLY OPERATED COPPER ALLOY AND STAINLESS STEEL BALL VALVES FOR POTABLE WATER SUPPLY IN BUILDINGS - TEST AND REQUIREMENTS
Hardcopy , PDF
English
01-01-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Designation
5 Design requirements
5.1 Materials
5.1.1 Body and ball materials
5.2 End connections
5.3 Operation
5.3.1 Operating devices
5.4 Stops
5.5 Ball bore
5.5.1 Full bore
5.5.2 Reduced bore
6 Performance requirements
6.1 Operating torque
6.2 Stop resistance
6.3 Leak-tightness
6.4 Angular seal
7 Test methods
7.1 Operating torque test
7.2 Torque and bending test
7.2.1 General
7.2.2 Sequence of torsion and bending moments
tests for valves
7.3 Stops and spindle - Mechanical resistance test
7.4 Hydraulic tests
7.4.1 Leak-tightness test
7.4.2 Hydraulic strength
7.5 Acoustic tests and requirements
7.5.1 Principle
7.5.2 Test
7.5.3 Requirements
7.6 Endurance test
7.6.1 Endurance test
7.6.2 Test installation
7.6.3 Test
7.7 Angular seal
8 Marking
Bibliography
Applies to copper alloy ball valves, dimensions DN 8 to DN 100, for potable water supply in buildings up to PN 10 and a distribution temperature of 65 degree C.
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Standards | Relationship |
| ONORM EN 13828 : 2004 | Identical |
| NBN EN 13828 : 2003 | Identical |
| NF EN 13828 : 2004 | Identical |
| BS EN 13828:2003 | Identical |
| EN 13828:2003 | Identical |
| NS EN 13828 : 1ED 2003 | Identical |
| NEN EN 13828 : 2003 | Identical |
| UNE-EN 13828:2004 | Identical |
| DIN EN 13828:2003-12 | Identical |
| EN 1254-3:1998 | Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes |
| EN 1254-1:1998 | Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes |
| EN 1254-2:1998 | Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes |
| ISO 7005-3:1988 | Metallic flanges — Part 3: Copper alloy and composite flanges |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN ISO 6509:1995 | Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981) |
| EN 12165:2016 | Copper and copper alloys - Wrought and unwrought forging stock |
| EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| EN 10213-4 : 1995 | TECHNICAL DELIVERY CONDITIONS FOR STEEL CASTINGS FOR PRESSURE PURPOSES - PART 4: AUSTENITIC AND AUSTENITIC-FERRITIC STEEL GRADES |
| EN 1982:2017 | Copper and copper alloys - Ingots and castings |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.