I.S. EN 13807:2017
Current
The latest, up-to-date edition.
TRANSPORTABLE GAS CYLINDERS - BATTERY VEHICLES - DESIGN, MANUFACTURE, IDENTIFICATION AND TESTING
Hardcopy , PDF
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Design
5 Manufacturing
6 Identification
7 Type approval, inspection and testing
8 Documentation
Annex A (normative) - Specific requirements
for dissolved acetylene battery vehicles
Annex B (informative) - Marking of battery
vehicles and MEGCs
Bibliography
Defines the requirements for the design, manufacture, identification and testing of battery vehicles and multiple-element gas containers (MEGCs) containing cylinders, tubes or bundles of cylinders.
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 13807:2017 | Identical |
| NS EN 13807 : 2017 | Identical |
| UNI EN 13807 : 2005 | Identical |
| NF EN 13807 : 2017 | Identical |
| NBN EN 13807 : 2003 COR 2005 | Identical |
| NEN EN 13807 : 2017 | Identical |
| DIN EN 13807:2016-02 (Draft) | Identical |
| BS EN 13807:2017 | Identical |
| SN EN 13807 : 2003 | Identical |
| UNE-EN 13807:2017 | Identical |
| DIN EN 13807:2017-05 | Identical |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
| ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
| EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 9606-1:2012 | Qualification testing of welders — Fusion welding — Part 1: Steels |
| EN ISO 11114-3:2010 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) |
| EN ISO 13088:2012 | Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
| EN ISO 13769:2009 | Gas cylinders - Stamp marking (ISO 13769:2007) |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| EN ISO 13585:2012 | Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012) |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 13585:2012 | Brazing Qualification test of brazers and brazing operators |
| ISO 1496-3:1995 | Series 1 freight containers Specification and testing Part 3: Tank containers for liquids, gases and pressurized dry bulk |
| ISO 3807:2013 | Gas cylinders — Acetylene cylinders — Basic requirements and type testing |
| EN ISO 11114-2:2013 | Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) |
| ISO 10286:2007 | Gas cylinders Terminology |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| EN ISO 11114-4:2017 | Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) |
| EN 13134:2000 | Brazing - Procedure approval |
| EN ISO 10286:2015 | Gas cylinders - Terminology (ISO 10286:2015) |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| EN ISO 9606-1:2017 | Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013) |
| EN ISO 15615:2013 | Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices (ISO 15615:2013) |
| ISO 9090:1989 | Gas tightness of equipment for gas welding and allied processes |
| ISO 13769:2007 | Gas cylinders Stamp marking |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| ISO 13088:2011 | Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.