I.S. EN 13445-8:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
27-09-2014
Publisher
Superseded date
14-06-2021
Superseded by
$153.40
Including GST where applicable
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
4 General requirements
5 Materials
6 Design
7 Manufacture
8 Inspection and testing
9 Inspection and testing of serially produced pressure vessels — Model approval
Annex Y (informative) History of EN 13445-8
Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of the EU Pressure Equipment Directive 97/23/EC
Bibliography
Defines requirements for unfired pressure vessels and their parts made of aluminium and aluminium alloys in addition to the general requirements for unfired pressure vessels under EN 13445:2014 Parts 1 to 5.
| Committee |
TC 54
|
| DevelopmentNote |
ISSUE 3 dated 19.08.2016 issued incorporating latest Correction Notice issued by CEN dated 03.08.2016. (09/2016)
|
| DocumentType |
Standard
|
| Pages |
30
|
| ProductNote |
The date of any NSAI previous adoption may not match the date of its original CEN/CENELEC document. THIS STANDARD ALSO REFERS TO EN 12392:2000,EN 13445-1:2014,EN ISO 3452-1:2013,EN ISO 11666:2010,EN ISO 17635:2010,EN ISO 17640:2010,EN ISO 23277:2009,CEN ISO/TR 15608:2013,EN 764-4:2002,EN 1252-1:1998,EN 1713:1998,EN ISO 4063:2000,
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 13445-8 : 2017 | Identical |
| NBN EN 13445-8 : 2014 AMD 1 2015 | Identical |
| EN 13445-8 : 2014 COR 2017 | Identical |
| DIN EN 13445-8:2015-12 | Identical |
| NEN EN 13445-8 : 2016 | Identical |
| NS EN 13445-8 : 2014 AMD 1 2014 | Identical |
| BS EN 13445-8 : 2014 | Identical |
| NF EN 13445-8 : 2014 AC 2 2016 | Identical |
| EN 13445-8:2014 | Identical |
| DIN EN 13445-8:2014-12 | Equivalent |
| UNE-EN 13445-8:2015 | Identical |
| DIN EN 13445-8:2017-12 | Identical |
| ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
| EN ISO 6520-1:2007 | Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) |
| EN ISO 3452-2:2013 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
| EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
| ISO 2553:2013 | Welding and allied processes — Symbolic representation on drawings — Welded joints |
| ISO 6520-1:2007 | Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| ISO 9606-2:2004 | Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys |
| EN 13445-5 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING |
| EN ISO 16826:2014 | Non-destructive testing - Ultrasonic testing - Examination for discontinuities perpendicular to the surface (ISO 16826:2012) |
| ISO 11666:2010 | Non-destructive testing of welds — Ultrasonic testing — Acceptance levels |
| ISO 10042:2005 | Welding — Arc-welded joints in aluminium and its alloys — Quality levels for imperfections |
| EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
| ISO 23277:2015 | Non-destructive testing of welds — Penetrant testing — Acceptance levels |
| ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| EN 13445-5:2014 | Unfired pressure vessels - Part 5: Inspection and testing |
| EN ISO 3452-3:2013 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
| EN 485-2:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| EN 586-2:1994 | Aluminium and aluminium alloys - Forgings - Part 2: Mechanical properties and additional property requirements |
| EN ISO 4063:2010 | Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01) |
| EN ISO 23277:2015 | Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| EN 13445-4:2014 | Unfired pressure vessels - Part 4: Fabrication |
| ISO 17640:2017 | Non-destructive testing of welds — Ultrasonic testing — Techniques, testing levels, and assessment |
| ISO 3452-1:2013 | Non-destructive testing — Penetrant testing — Part 1: General principles |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| EN 13445-4 : 2014 COR 2017 | UNFIRED PRESSURE VESSELS - PART 4: FABRICATION |
| ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
| EN ISO 17637:2016 | Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2016) |
| ISO 3452-2:2013 | Non-destructive testing — Penetrant testing — Part 2: Testing of penetrant materials |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials — Part 2: Comprehensive quality requirements |
| EN ISO 23279:2017 | Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017) |
| EN ISO 15614-2:2005 | Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2005) |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| ISO 17636-2:2013 | Non-destructive testing of welds — Radiographic testing — Part 2: X- and gamma-ray techniques with digital detectors |
| EN ISO 9606-2:2004 | Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) |
| ISO 857-1:1998 | Welding and allied processes — Vocabulary — Part 1: Metal welding processes |
| ISO 2553:1992 | Welded, brazed and soldered joints — Symbolic representation on drawings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| ISO 17637:2016 | Non-destructive testing of welds — Visual testing of fusion-welded joints |
| EN 12392:2016 | Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment |
| EN ISO 17636-2:2013 | Non-destructive testing of welds - Radiographic testing - Part 2: X- and gamma-ray techniques with digital detectors (ISO 17636-2:2013) |
| EN 754-2:2016 | Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 2: Mechanical properties |
| ISO 16826:2012 | Non-destructive testing — Ultrasonic testing — Examination for discontinuities perpendicular to the surface |
| ISO 23279:2017 | Non-destructive testing of welds — Ultrasonic testing — Characterization of discontinuities in welds |
| ISO 4063:2009 | Welding and allied processes — Nomenclature of processes and reference numbers |
| EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| EN 573-3:2013 | Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products |
| EN 764-4:2014 | Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials — Part 3: Standard quality requirements |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.