I.S. EN 133200:1995
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED) (SECTIONAL SPECIFICATION)
Hardcopy , PDF
02-02-2006
English
14-07-1995
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 GENERAL
1.1 Scope
1.2 Related documents
1.3 Information to be given in a detail specification
1.4 Terminology
1.5 Marking
2 PREFERRED RATINGS AND CHARACTERISTICS
2.1 Preferred characteristics
2.2 Preferred values of ratings
3 QUALITY ASSESSMENT PROCEDURES
3.1 Primary stage of manufacture
3.2 Structurally similar filters
3.3 Certified records of released lots
3.4 Approval testing
3.5 Quality conformance inspection
4 TEST AND MEASUREMENT PROCEDURES
4.1 Visual examination and check of dimensions
4.2 Voltage proof
4.3 Insulation resistance
4.4 D.C. line resistance or voltage drop at rated current
4.5 Insertion loss
4.6 Resistance
4.7 Robustness of terminations
4.8 Resistance to soldering heat
4.9 Solderability
4.10 Rapid change of temperature
4.11 Vibration
4.12 Bump
4.13 Shock
4.14 Container sealing
4.15 Climatic sequence
4.16 Damp heat, steady state
4.17 Temperature rise
4.18 Impulse voltage
4.19 Endurance
4.20 Charge and discharge
4.21 Passive flammability
4.22 Current overload
4.23 Solvent resistance of the marking
4.24 Component solvent resistance
ANNEX A TEST SCHEDULE FOR QUALIFICATION APPROVAL
ANNEX B TEST SCHEDULE FOR SAFETY REQUIREMENTS ONLY
ANNEX C CIRCUIT FOR THE IMPULSE VOLTAGE TEST
ANNEX D SUITABLE CIRCUIT FOR THE ENDURANCE TEST
Applies to passive filter units for electromagnetic interference suppression for which safety tests are appropriate.
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| DIN EN 133200 : 2000 | Identical |
| EN 133200:1999 | Identical |
| BS EN 133200:1999 | Identical |
| SN EN 133200 : 1994 | Identical |
| EN 133100:1998 | Sectional Specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| EN 132400 : 1994 AMD 4 2001 | SECTIONAL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (ASSESSMENT LEVEL D) |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| EN 100114-1 : 1996 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| IEC 60940:2015 | Guidance information on the application of capacitors, resistors, inductors and complete filter units for electromagnetic interference suppression |
| IEC 60062:2016 | Marking codes for resistors and capacitors |
| IEC 60063:2015 | Preferred number series for resistors and capacitors |
| EN 133000:1997 | Generic Specification: Passive filter units for electromagnetic interference suppression |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN 130500:1998 | Sectional Specification: Fixed metallized polycarbonate film dielectric capacitors for direct current |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.