I.S. EN 13309:2010
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY
09-01-2019
18-07-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Exceptions
6 Test report
Annex A (normative) Reference limits
Annex B (normative) Method of measurement of radiated
broadband electromagnetic emissions from
construction machinery
Annex C (normative) Method of measurement of radiated
narrowband electromagnetic emissions from
construction machinery
Annex D (normative) Method of measurement of radiated
broadband electromagnetic emissions from
electrical/electronic sub-assembly
Annex E (normative) Method of measurement of radiated
narrowband electromagnetic emissions from
electrical/electronic sub-assemblies
Annex F (informative) A Guideline for selecting the test
specimen configuration
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2004/108/EC
Bibliography
Gives test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of construction machinery with respect to free trade of goods in the European Union.
| DocumentType |
Standard
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
This European Standard provides test methods and acceptance criteria for the evaluation of theelectromagnetic compatibility of construction machinery with respect to free trade of goods in the EuropeanUnion. It deals with functional EMC requirements under typical EMC environmental conditions.This European Standard does not deal with safety requirements.Electrical and/or electronic component(s) or separate technical unit(s) intended to be fitted in constructionmachinery are also dealt with in this European Standard. The following electromagnetic disturbancephenomena are evaluated: broadband and narrowband electromagnetic interference; electromagnetic field immunity test; broadband and narrowband interference of electrical/electronic sub-assemblies; electromagnetic field immunity test of electrical/electronic sub-assemblies; electrostatic discharge; conducted transients.Construction machinery can have DC and/or AC internal electrical power supply systems.Machines that are designed to be supplied by the "Public Mains Network" are specifically excluded
| Standards | Relationship |
| NBN EN 13309 : 2010 | Identical |
| BS EN 13309:2010 | Identical |
| NS EN 13309 : 2010 | Identical |
| NEN EN 13309 : 2010 | Identical |
| NF EN 13309 : 2010 | Identical |
| SN EN 13309 : 2010 | Identical |
| UNE-EN 13309:2010 | Identical |
| DIN EN 13309:2010-12 | Identical |
| UNI EN 13309 : 2010 | Identical |
| EN 13309:2010 | Identical |
| CISPR 12:2007+AMD1:2009 CSV | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| EN 55016-2-3:2017 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| CISPR 16-1-4:2010+AMD1:2012+AMD2:2017 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| ISO 11451-3:2015 | Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: On-board transmitter simulation |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| CISPR 16-2-3:2016 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| CISPR 16-1:1999+AMD1:2002 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
| EN 55016-1-1:2010/A2:2014 | SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-1: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - MEASURING APPARATUS (CISPR 16-1-1:2010/A2:2014) |
| ISO 11451-4:2013 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Bulk current injection (BCI) |
| ISO 11451-1:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.