I.S. EN 13108-5:2016
Current
The latest, up-to-date edition.
BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS - PART 5: STONE MASTIC ASPHALT
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Requirements for constituent materials
5 Requirements for the mixture
6 Assessment and verification of constancy of
performance - AVCP
7 Identification
Annex A (normative) - Calculations of the penetration
or the softening point of the binder of a mixture
when reclaimed asphalt is used
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No. 305/2011
Bibliography
Defines requirements for mixtures of the mix group Stone Mastic Asphalt for use on roads, airfields and other trafficked areas.
| DevelopmentNote |
2006 Edition along with its corrigendum is still active & available until the European Commission directive update their references to the New Edition. (03/2017)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN 13108-5 : 2016 | Identical |
| BS EN 13108-5:2016 | Identical |
| UNE-EN 13108-5:2007 | Identical |
| EN 13108-5:2016 | Identical |
| UNI EN 13108-5 : 2006 | Identical |
| DIN EN 13108-5:2013-06 (Draft) | Identical |
| NF EN 13108-5 : 2006 | Identical |
| NS EN 13108-5 : 2006 | Identical |
| NEN EN 13108-5 : 2016 | Identical |
| S.R. 28:2009 | RECOMMENDATION FOR THE USE AND IMPLEMENTATION OF THE I.S. EN 13108 SERIES BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| EN 12697-43:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 43: Resistance to fuel |
| EN 12697-46:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 46: Low temperature cracking and properties by uniaxial tension tests |
| EN 12697-8:2003 | Bituminous mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens |
| EN 12697-22:2003+A1:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 22: Wheel tracking |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| EN 12697-25:2016 | Bituminous mixtures - Test methods - Part 25: Cyclic compression test |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 12697-41:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 41: Resistance to de-icing fluids |
| EN 13108-20:2016 | Bituminous mixtures - Material specifications - Part 20: Type Testing |
| EN 13108-8:2016 | Bituminous mixtures - Material specifications - Part 8: Reclaimed asphalt |
| EN 12697-45:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test |
| EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| EN 12697-18:2017 | Bituminous mixtures - Test methods - Part 18: Binder drainage |
| EN 12697-24:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 24: Resistance to fatigue |
| EN 12697-31:2007 | Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor |
| EN 12697-3:2013 | Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator |
| EN 12697-49:2014 | Bituminous mixtures - Test methods for hot mix asphalt - Part 49: Determination of friction after polishing |
| EN 13108-21:2016 | Bituminous mixtures - Material specifications - Part 21: Factory Production Control |
| EN 12697-16:2016 | Bituminous mixtures - Test methods - Part 16: Abrasion by studded tyres |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| EN 12591:2009 | Bitumen and bituminous binders - Specifications for paving grade bitumens |
| EN 12697-44:2010 | Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test |
| EN 12697-4:2015 | Bituminous mixtures - Test methods - Part 4: Bitumen recovery: Fractionating column |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.