I.S. EN 131-2:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
Available format(s)
Hardcopy , PDF
Superseded date
17-04-2021
Superseded by
Language(s)
English
Published date
29-06-2010
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Testing
6 Marking and user instructions
7 Certification
Annex A (normative) - Test sequence
Annex B (informative) - A-deviations
Bibliography
Defines the general design features, requirements and test methods for portable ladders.
| DevelopmentNote |
Supersedes SR CEN/TS 16665. 2010 Edition Re-Issued in January 2017 & incorporates AMD 2 2017. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN 131-2 : 2010 + A1 2012 | Identical |
| DIN EN 131-2:2012-08 | Identical |
| UNI EN 131-2 : 2012 | Identical |
| NF EN 131-2 : 2010 + A2 2017 | Identical |
| EN 131-2:2010+A2:2017 | Identical |
| NEN EN 131-2 : 2010 + A2 2017 | Identical |
| BS EN 131-2 : 2010 | Identical |
| UNE-EN 131-2:2010 | Identical |
| EN 1310:1997 | Round and sawn timber - Method of measurement of features |
| EN 50528:2010 | Insulating ladders for use on or near low voltage electrical installations |
| ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials Part 1: Criteria for the selection of the appropriate level of quality requirements |
| EN ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials - Part 3: Standard quality requirements (ISO 3834-3:2005) |
| EN 391:2001 | Glued laminated timber - Delamination test of glue lines |
| EN ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials - Part 2: Comprehensive quality requirements (ISO 3834-2:2005) |
| ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials Part 4: Elementary quality requirements |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| EN ISO 3834-4:2005 | Quality requirements for fusion welding of metallic materials - Part 4: Elementary quality requirements (ISO 3834-4:2005) |
| EN 392:1995 | Glued laminated timber - Shear test of glue lines |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| EN 131-7:2013 | Ladders - Part 7: Mobile ladders with platform |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 14731:2006 | Welding coordination Tasks and responsibilities |
| EN 581-1:2017 | Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 1: General safety requirements |
| EN 131-6:2015 | Ladders - Part 6: Telescopic ladders |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| EN 10088-2:2014 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| IEC 61478:2001+AMD1:2003 CSV | Live working - Ladders of insulating material |
| EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 3834-2:2005 | Quality requirements for fusion welding of metallic materials Part 2: Comprehensive quality requirements |
| EN 386:2001 | Glued laminated timber - Performance requirements and minimum production requirements |
| EN 14183:2003 | Step stools |
| EN 408:2010+A1:2012 | Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties |
| EN 385:2001 | Finger jointed structural timber - Performance requirements and minimum production requirements |
| EN ISO 14731:2006 | Welding coordination - Tasks and responsibilities (ISO 14731:2006) |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| EN 131-4:2007 | Ladders - Part 4: Single or multiple hinge-joint ladders |
| EN ISO 3834-1:2005 | Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2005) |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 844-9:1997 | Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber |
| EN 131-1:2015 | Ladders - Part 1: Terms, types, functional sizes |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 61478:2001/A1:2003 | LIVE WORKING - LADDERS OF INSULATING MATERIAL |
| EN ISO 14644-1:2015 | Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO 14644-1:2015) |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| ISO 3834-3:2005 | Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.