I.S. EN 12053:2001
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SAFETY OF INDUSTRIAL TRUCKS - TEST METHODS FOR MEASURING NOISE EMISSIONS
Hardcopy , PDF
09-09-2008
English
09-11-2001
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
3.1 A-weighted emission sound pressure level at the operator's
position for the operational cycle L[pAZ]
3.2 A-weighted sound power level in an operational cycle L[WAZ]
3.3 Forwards operation
3.4 Industrial and rough terrain truck families
3.5 Idling
4 Installation and equipment
4.1 Test environment
4.2 Equipment and condition of the truck
4.3 Position of the truck during measurement
4.3.1 LIFT and IDLE conditions
4.3.2 DRIVE condition
5 Operating conditions during measurement
5.1 General
5.2 Load of the truck
5.3 Operation of the truck during measurement
5.3.1 General
5.3.2 LIFT condition
5.3.3 IDLE condition
5.3.4 DRIVE condition
5.4 Trucks equipped with a cab
5.4.1 Cab with an air conditioning and/or pressurized
ventilating system(s)
5.4.2 Cab without air conditioning or pressurized ventilating
system(s)
6 Noise determination
6.1 Instrumentation
6.2 Microphone positions
6.2.1 Microphone positions for determination of the sound
pressure levels at the operator's position
6.2.2 Microphone positions for determination of the sound
power levels
6.3 Measurements
6.3.1 Measurements of sound pressure levels at operator's
position
6.3.2 Sound power level determination
7 Measurement uncertainties
8 Information to be recorded
9 Declaration of noise emission values
Annex A (Normative) Calculation of levels in an average operational
cycle
A.1 Calculation of the emission sound pressure level in an
operational cycle
A.2 Calculation of the sound power level for an operational
cycle
A.3 Time proportion factors of the operating conditions
Annex ZA (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Presents methods for determining the sound pressure level at the operator's position and the sound power level of industrial and rough terrain trucks.
| DevelopmentNote |
2001 Edition Re-Issued in September 2008 & incorporates AMD 1 2008. (09/2008)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNE-EN 12053:2002 | Identical |
| SN EN 12053 : 2001 + A1 2008 | Identical |
| BS EN 12053 : 2001 | Identical |
| DIN EN 12053:2009-07 | Identical |
| NF EN 12053 : 2001 + A1 2008 | Identical |
| EN 12053:2001+A1:2008 | Identical |
| NS EN 12053 : 2001 + A1 2008 | Identical |
| NEN EN 12053 : 2001 + A1 2008 | Identical |
| NBN EN 12053 : 2001 + A1 2008 | Identical |
| UNI EN 12053 : 2008 | Identical |
| EN 1551:2000 | Safety of industrial trucks - Self propelled trucks over 10 000 kg capacity |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 1726-2:2000 | Safety of Industrial Trucks - Self-propelled trucks up to and including 10000 kg capacity and tractors with a drawbar pull up to and including 20000 N - Part 2: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads |
| EN 1525:1997 | Safety of industrial trucks - Driverless trucks and their systems |
| EN 1757-1 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 1: STACKER TRUCKS |
| EN 1757-2 : 2001 | SAFETY OF INDUSTRIAL TRUCKS - PEDESTRIAN PROPELLED TRUCKS - PART 2: PALLET TRUCKS |
| EN 1459:1998+A3:2012 | Safety of industrial trucks - Self-propelled variable reach trucks |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 5053:1987 | Powered industrial trucks Terminology |
| EN ISO 4871:2009 | Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.