I.S. EN 1176-1:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLAYGROUND EQUIPMENT AND SURFACING - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
19-10-2023
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements
5 Verification of compliance and reports
6 Information to be provided by the
manufacturer/supplier
7 Marking
Bibliography
Annex A (normative) - Loads
Annex B (normative) - Method of calculation of
structural integrity
Annex C (normative) - Physical testing of
structural integrity
Annex D (normative) - Test methods for entrapment
Annex E (informative) - Overview of possible
entrapment situations
Annex E (informative) - Overview of possible
entrapment situations
Annex G (informative) - Illustration of sieve test
Annex H (normative) - Procedure for confirming the
adequate level of impact attenuation after
Annex I (informative) - A-deviations
Bibliography
Provides general safety requirements for permanently installed public playground equipment and surfacing.
| DocumentType |
Standard
|
| Pages |
108
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN EN 1176-1 : 2017 | Identical |
| DIN EN 1176-1:2016-06 (Draft) | Identical |
| EN 1176-1:2017 | Identical |
| UNI EN 1176-1 : 2008 | Identical |
| UNE-EN 1176-1:2009 | Identical |
| NBN EN 1176-1 : 2008 | Identical |
| DIN EN 1176-1:2008-08 | Identical |
| ONORM EN 1176-1 : 2017 | Identical |
| NF EN 1176-1 : 2017 | Identical |
| SN EN 1176-1 : 2018 | Identical |
| NS EN 1176-1 : 2017 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| CEN/CENELEC GUIDE 14 : 2009 | CHILD SAFETY - GUIDANCE FOR ITS INCLUSION IN STANDARDS |
| EN 1176-3:2017 | Playground equipment and surfacing - Part 3: Additional specific safety requirements and test methods for slides |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN 335:2013 | Durability of wood and wood-based products - Use classes: definitions, application to solid wood and wood-based products |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 13411-5:2003+A1:2008 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
| EN ISO 2307:2010 | Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2010) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| 2001/95/EC : 2001 AMD 2 2009 | DIRECTIVE 2001/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 3 DECEMBER 2001 ON GENERAL PRODUCT SAFETY (TEXT WITH EEA RELEVANCE) |
| EN 818-3:1999+A1:2008 | Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4 |
| EN 818-2:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 |
| CEN/TR 16598:2014 | Collection of rationales for EN 1176 - Requirements |
| EN 13411-3:2004+A1:2008 | Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing |
| ISO 9554:2010 | Fibre ropes General specifications |
| CEN/TR 16879:2016 | Siting of Playground and other recreational facilities - Advice on methods for positioning and separation |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| EN ISO 9554:2010 | Fibre ropes - General specifications (ISO 9554:2010) |
| ISO 2307:2010 | Fibre ropes Determination of certain physical and mechanical properties |
| EN 13219:2008 | Gymnastic equipment - Trampolines - Functional and safety requirements, test methods |
| EN 1176-10:2008 | Playground equipment and surfacing - Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment |
| EN 350:2016 | Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials |
| EN 1176-2:2017 | Playground equipment and surfacing - Part 2: Additional specific safety requirements and test methods for swings |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 1176-7:2008 | Playground equipment and surfacing - Part 7: Guidance on installation, inspection, maintenance and operation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.