I.S. EN 10079:2007
Current
Current
The latest, up-to-date edition.
DEFINITION OF STEEL PRODUCTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2007
Publisher
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
Annex A (normative) - Steel products and associated
standards
Annex B (informative) - Notes on the former European Coal
and Steel Community (ECSC) definitions and
Harmonised Commodity Description and Coding
System (HS) definitions
B.1 European Coal and Steel Community (ECSC)
definitions
B.2 Harmonized Commodity Description and Coding
System definitions
Annex C (informative) - Trilingual vocabulary
Bibliography
Defines terms for steel products according to: a) shape and dimensions; and b) appearance and surface condition.
| DocumentType |
Standard
|
| Pages |
46
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 10079:2007 | Identical |
| NBN EN 10079 : 2007 | Identical |
| UNE-EN 10079:2008 | Identical |
| NEN EN 10079 : 2007 | Identical |
| UNI EN 10079 : 2007 | Identical |
| SN EN 10079 : 2008 | Identical |
| NS EN 10079 : 2ED 2007 | Identical |
| BS EN 10079:2007 | Identical |
| NF EN 10079 : 2007 | Identical |
| DIN EN 10079:2007-06 | Identical |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10107:2014 | Grain-oriented electrical steel strip and sheet delivered in the fully processed state |
| EURONORM 54 : 1980 | HOT-ROLLED SMALL U-BEAMS |
| EN 10162:2003 | Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances |
| ISO 10241:1992 | International terminology standards Preparation and layout |
| EN 10305-5:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded cold sized square and rectangular tubes |
| EN 10048:1996 | Hot rolled narrow steel strip - Tolerances on dimensions and shape |
| ISO 6929:2013 | Steel products — Vocabulary |
| EN 10051:2010 | Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
| EN 39:2001 | Loose steel tubes for tube and coupler scaffold - Technical delivery conditions |
| EN 10140:2006 | Cold rolled narrow steel strip - Tolerances on dimensions and shape |
| EN 10169-1:2003 | Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods) |
| EN 10106:2015 | Cold rolled non-oriented electrical steel strip and sheet delivered in the fully processed state |
| EN 10216-5:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes |
| EN 10305-3:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes |
| EN 10218-2:2012 | Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
| EN 10029:2010 | Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
| EN 10056-2:1993 | Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions |
| EN 10305-6:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10248-2:1995 | Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
| EN 10279:2000 | Hot rolled steel channels - Tolerances on shape, dimensions and mass |
| EN 10034:1993 | Structural steel I and H sections - Tolerances on shape and dimensions |
| PREN 10138-2 : DRAFT 2000 | PRESTRESSING STEELS - PART 2: WIRE |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 10080:2005 | Steel for the reinforcement of concrete - Weldable reinforcing steel - General |
| EN 10205:2016 | Cold reduced tinmill products - Blackplate |
| EURONORM 53 : 1962 | HOT-ROLLED BROAD FLANGED I-BEAMS (WIDE-FLANGED I-BEAMS) WITH PARALLEL FLANGE FACINGS |
| EN 10131:2006 | Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape |
| EN 10024:1995 | Hot rolled taper flange I sections - Tolerances on shape and dimensions |
| EN 10305-2:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes |
| EN 10305-1:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes |
| EN 10092-1:2003 | Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions |
| EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
| EURONORM 19 : 1957 | IPE BEAMS - I-BEAMS WITH PARALLEL FLANGE FACINGS |
| EN 10217-7:2014 | Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes |
| EN 10305-4:2016 | Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| EN 10060:2003 | Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10108:2004 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
| EN 10143:2006 | Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape |
| EN 10250-1:1999 | Open die steel forgings for general engineering purposes - Part 1: General requirements |
| EN 10017:2004 | Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| EN 10294-1:2005 | Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels |
| EN 10296-1:2003 | Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10020:2000 | Definition and classification of grades of steel |
| EN 10219-2:2006 | Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties |
| EN 10297-1:2003 | Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes |
| EN 10061:2003 | Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10059:2003 | Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| EN 10092-2:2003 | Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions |
| PREN 10138-4 : DRAFT 2000 | PRESTRESSING STEELS - PART 4: BARS |
| EN 10055:1995 | Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions |
| EN 10208-1:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery condi-tions - Part 1: Pipes of requirement class A |
| EN 10220:2002 | Seamless and welded steel tubes - Dimensions and masses per unit length |
| EN 10265:1995 | Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability |
| EN 10341:2006 | Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state |
| EN 10303:2015 | Thin magnetic steel strip and sheet for use at medium frequencies |
| EN 10067:1996 | Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass |
| EURONORM 91 : 1981 | HOT-ROLLED WIDE FLATS - PERMISSIBLE DEVIATIONS FOR DIMENSION, FORM AND WEIGHT |
| EN 10216-3:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes |
| EN 10255:2004+A1:2007 | Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions |
| EN 10222-1:2017 | Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
| ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
| EN 10249-2:1995 | Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.