FED-STD-791 Revision D:2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Testing Method of Lubricants, Liquid Fuels, and Related Products
Available format(s)
PDF
Language(s)
English
Published date
06-11-2007
Publisher
Superseded date
22-06-2021
Superseded by
$34.82
Including GST where applicable
Describes test methods for sampling, inspecting and testing lubricants, liquid fuels and related products.
| DocumentType |
Standard
|
| Pages |
460
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
This test method standard is composed of standard test methods for sampling, inspecting and testing lubricants, liquid fuels and related products. It is issued pursuant to the Federal Property and Administration Services Act of 1949, as amended and its application to the purchase of commodities referred to herein is mandatory on all Federal agencies.
| Standards | Relationship |
| ASTM E 1 : 2014 : REDLINE | Corresponds |
| ASTM D 87 : 2009 | Corresponds |
| ASTM D 88 : 2007 | Corresponds |
| ASTM D 88 : 2007 : R2013 | Corresponds |
| MIL-G-5572 Revision F:1969 | Gasoline, Aviation: Grades 80/87, 100/130, 115/145 (S/S by ASTM-D910) |
| NFPA 325M : 1991 | FIRE HAZARD PROPERTIES OF FLAMMABLE LIQUIDS, GASES, AND VOLATILE SOLIDS |
| SAE AMS3052 | Grease, Aircraft, General Purpose, Low Temperature Range, Lithium Thickened |
| MIL-DTL-17111 Revision E:2012 | FLUID, POWER TRANSMISSION |
| DEFSTAN 91-94/2(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 3 CST JOINT SERVICE DESIGNATION: OX-7 |
| MIL-L-46152 Revision E:1990 | Lubricating Oil, Internal Combustion Engine, Administrative Service (S/S by A-A-52039) |
| MIL-P-24752 Base Document:1990 | Packing Material, Flax or Hemp |
| MIL-C-85043 Revision B:1987 | Cloths, Cleaning, Low-Lint (S/S by A-A-59323) |
| O-L-298 Revision B:1969 | LITHOGRAPHIC BLANKET-ROLLER WASH (NO S/S DOCUMENT) |
| VV B 680 : C | BRAKE FLUID, AUTOMOTIVE |
| DOD L 24574 : (1) | LUBRICATING FLUID FOR LOW AND HIGH PRESSURE OXIDIZING GAS MIXTURES |
| MIL-C-46113 Revision B:1993 | Cutting-Fluid Concentrates, Transparent (No S/S Document) |
| O-D-825 Revision C:1973 | DUPLICATING FLUID, DIRECT PROCESS (SPIRIT TYPE) |
| MIL L 83767 : B | LUBRICATING OIL, VACUUM PUMP, MECHANICAL |
| MIL C 18487 : A | COMPOUND, GUN SLUSHING |
| CGSB 3-GP-44MB : 1990 | REFRIGERANT COMPRESSOR LUBRICATING OIL, UNINHIBITED |
| NACE RP 04 87 : 0 | CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTATIVES AND VAPOUR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
| MIL-PRF-32014 Revision A:2006 | Grease, Aircraft and Instrument |
| MIL-G-46015 Revision B:1983 | Gasoline, Automotive, Combat, Referee Grade (No S/S Document) |
| MIL I 85470 : A | INHIBITOR, ICING, FUEL SYSTEM, HIGH FLASH |
| MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| MIL T 83133 : D | TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| DDD-B-1022 Revision A:1975 | BLANKET, BED (THERMAL TYPE), COTTON (S/S BY ASTM-D5432) |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-T-5544 Revision C:1991 | THREAD COMPOUND, ANTISEIZE, GRAPHITE-PETROLATUM (S/S BY SAE-AMS2518) |
| TT-P-595 Revision A:1972 | Preservative Coating, Canvas |
| MIL-DTL-27422 Revision F:2014 | Tank, Fuel, Crash-Resistant, Ballistic-Tolerant, Aircraft |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| MIL-T-17128 Revision C:1982 | Transducer Fluid, Sonar |
| MIL I 27686 : F | INHIBITOR, ICING, FUEL SYSTEM |
| MIL-P-83770 Revision B:1983 | POTASSIUM DICHROMATE - SULFURIC ACID TEST SOLUTION (METRIC) (NO S/S DOCUMENT) |
| MIL-HDBK-113 Revision C:1989 | Guide for the Selection of Lubricants, Functional Fluids, Preservatives and Speciality Products for use in Ground Equipment Systems |
| MIL-PRF-46002 Revision D:2010 | Preservative Oil, Contact and Volatile Corrosion-Inhibited |
| MIL-P-55025 Base Document:1958 | Polystyrene, Unmodified (for use as a Binder in Explosives) |
| VV L 001071 : A NOTICE 1 | LUBRICATING OIL, STEAM CYLINDER, MINERAL |
| MIL-G-83414 Base Document:1973 | Grease, Gunmount, Aircraft (No S/S Document) |
| MIL T 83483 : B | THREAD COMPOUND, ANTISEIZE, MOLYBDENUM DISULFIDE-PETROLATUM |
| VV-L-800 Revision C:1983 | Lubricating Oil, General Purpose, Preservative, (Water-Displacing, Low Temperature) (S/S by MIL-PRF-32033) |
| MIL T 38219 : B (1) | TURBINE FUEL, LOW VOLTALITY JP 7 |
| TT-M-261 Revision D:1970 | Methyl Ethyl Ketone, Technical (S/S by ASTM-D740) |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| MIL-PRF-680 Revision C:2010 | Degreasing Solvent |
| MIL H 87257 : 0 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT & MISSILE |
| MIL L 6081 : C | LUBRICATING OIL, JET ENGINE |
| O-R-1151 Revision B:1969 | Regenerator, Lithographic Blanket (No S/S Document) |
| MIL B 46176 : A | BRAKE FLUID, SILICONE, AUTOMOTIVE, ALL WEATHER, OPERATIONAL AND PRESERVATIVE, METRIC |
| MIL F 24951 : B | FUEL OIL RECLAIMED |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| TT-I-735 Revision A:1963 | Isopropyl Alcohol |
| MIL L 9000 : H | LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL |
| MIL-C-25107 Revision B:1972 | Carbon Removing Compound, Orthodichlorobenzene, for Engine Parts (No S/S Document) |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE (S/S BY SAE-AMS3277, SEE NOTICE 1 FOR ADDITIONAL INFORMATION) |
| MIL-PRF-32359 Base Document:2012 | Cleaner, General, for Ground Vehicles and Ground Support Equipment, Hap-Free |
| MIL L 24467 : 0 | LUBRICATING OIL, STEAM TURBINE, VAPOR-SPACE INHIBITED |
| MIL P 8116 : B | PUTTY, ZINC CHROMATE, GENERAL PURPOSE |
| MIL-P-14536 Base Document:1957 | Polyisobutylene Binder |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL L 63460 : D | LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPONS SYSTEMS (METRIC) |
| MIL C 21567 : A | COMPOUND, SILICONE, SOFT FILM |
| TT-W-156 Revision B:1972 | Water-Repellent Compound, Textile Finish |
| MIL L 14107 : C | LUBRICATING OIL, WEAPONS, LOW TEMPERATURE |
| MIL-PRF-46167 Revision D:2005 | Lubricating Oil, Internal Combustion Engine, Arctic |
| MIL C 87252 : B | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| MIL-H-19457 Revision D:1989 | Hydraulic Fluid, Fire-Resistant, Non-Neurotoxic |
| ASTM D 2625 : 1994 : R2003 | Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) |
| MIL-T-23624 Base Document:1962 | TOLYLENE - 2, 4 - DIISOCYANATE (NO S/S DOCUMENT) |
| MIL-C-22230 Revision B:1987 | Cleaning Compound, Fuel Tank and Bilge |
| API 5A3 REDLINE : 2009 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| ASTM D 6185 : 2011 | Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
| API 5A3 : 2011 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| SAE AMSC27725D | Coating, Corrosion Preventative, for Aircraft Integral Fuel Tanks for Use to 250 °F (121 °C) |
| SAE AMS1541C | Cleaner, Fuel Drop Tank Water-Soluble |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ASTM D 6922 : 2013-05 | TEST METHOD FOR DETERMINATION OF HOMOGENEITY AND MISCIBILITY IN AUTOMOTIVE ENGINE OILS |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-DTL-5578 Revision D:2008 | Tanks, Fuel, Aircraft, Self-Sealing |
| MIL-PRF-7061 Revision E:2014 | Hose, Elastomeric, Aircraft, Self-Sealing, Aromatic Fuel |
| MIL-H-8775 Revision D:1976 | Hydraulic System Components, Aircraft and Missiles General Specification for (S/S by SAE-AS8775) |
| MIL-DTL-24299 Revision B:2017 | Heaters, Lubrication Oil and Fuel, Electric Naval Shipboard |
| MIL C 22235 : A | CORROSION PREVENTIVE OIL, NONSTAINING |
| MIL G 23827 : B | GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW |
| MIL L 3150 : C | LUBRICATING OIL, PRESERVATIVE MEDIUM |
| MIL-D-81956 Revision A:1980 | Detergent, external Removable Fuel Tanks (S/S by MIL-PRF-85570) |
| A-A-52306 Revision A:1995 | Lubricating Oil, Heavy-Duty Diesel Engine (S/S by SAE-J2363) |
| MIL-M-17185 Revision A:1956 | Mounts, Resilient, General Specifications and Tests For (Shipboard Application) |
| MIL-F-53053 Base Document:1985 | Fuel Product, Coal-Oil Mixture (COM): Industrial Type Combustor-Boilers (No S/S Document) |
| DEFSTAN 05-50(PT61)/2(2003) : 2003 AMD 1 2003 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 61: METHODS FOR TESTING GAS TURBINE ENGINE SYNTHETIC LUBRICANTS |
| MIL-S-8660 Revision C:1983 | SILICONE COMPOUND, NATO CODE NUMBER S-736 (S/S BY SAE-AS8660) |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE (S/S BY SAE-AMS-S-4383) |
| MIL-S-81087 Revision C:1981 | SILICONE FLUID, CHLORINATED PHENYL METHYL POLYSILOXANE, NATO CODE NUMBER H-536 (NO S/S DOCUMENT) |
| MIL-G-25537 Revision C:1984 | Grease, Aircraft, Helicopter Oscillating Bearing, NATO Code Number G-366, Metric |
| MIL-C-10382 Revision D:1983 | Corrosion Preventive, Petrolatum, Spraying Application: for Food Handling Machinery and Equipment |
| MIL-F-27351 Base Document:1960 | Fluid, Calibrating, High Flash Point, Aircraft Fuel System Components (S/S by MIL-PRF-7024) |
| MIL L 46000 : C | LUBRICANT, SEMI-FLUID (AUTOMATIC WEAPONS) |
| MIL-H-8891 Revision A:1978 | Hydraulic Systems, Manned Flight Vehicles, Type III Design, Installation and Data Requirements for, General Specification for |
| MIL-D-23296 Revision A:1972 | Diethylene Glycol (No S/S Document) |
| MIL-DTL-27686 Revision G:1997 | Inhibitor, Icing, Fuel System (S/S by MIL-DTL-85470) |
| MIL-G-21164 Revision D:1981 | Grease, Molybdenum Disulfide, for Low and High Temperatures, NATO Code Number G-353 |
| MIL-C-46149 Base Document:1970 | Cutting Fluid, Sulfur-and-Chlorine-Additive (No S/S Document) |
| MIL F 38299 : B | FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
| MIL-DTL-3918 Revision B:2011 | Lubricating Oil, Instrument, Jewel Bearing (No S/S Document, see Notice 1 for Additional Information) |
| MIL-PRF-63460 Revision F:2017 | Cleaner, Lubricant, and Preservative for Weapons and Weapon Systems |
| MIL-PRF-6083 Revision G:2013 | Hydraulic Fluid, Petroleum Base, for Preservation and Operation |
| TT-S-735 Revision A:1988 | STANDARD TEST FLUIDS, HYDROCARBON (S/S BY ASTM-D471) |
| MIL H 6083 : E | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| MIL G 10924 : F | GREASE, AUTOMOTIVE AND ARTILLERY |
| DOD-A-24682 Base Document:1987 | Additive, Fuel Oil Stabilizer (No S/S Document) |
| MIL-P-13298 Revision A:1963 | Polyisobutylene (for Ammunition Use) |
| MIL-DTL-53131 Revision A:1998 | Lubricating Oil, Precision Rolling Element Bearing, Polyalphaolefin Based |
| MIL PRF 38219 : C | TURBINE FUEL, LOW VOLATILITY, JP-7 |
| MIL L 87100 : 0 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
| MIL L 53074 : LATEST | LUBRICATING OIL, STEAM CYLINDER, MINERAL |
| MIL-DTL-23549 Revision D:2002 | Grease, General Purpose |
| MIL-H-5440 Revision H:1993 | Hydraulic Systems, Aircraft, Design and Installation Requirements for (S/S by SAE-AS5440) |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| MIL-R-60864 Base Document:1967 | Resorcinol |
| MIL-G-46886 Revision B:1992 | Grease, Silicone (S/S by A-A-59173) |
| O-L-164 Revision D:1970 | LEATHER DRESSING, MILDEW PREVENTIVE (NO S/S DOCUMENT) |
| ASTM D 5968 : 2017 : REDLINE | TEST METHOD FOR EVALUATION OF CORROSIVENESS OF DIESEL ENGINE OIL AT 121 DEGREES C |
| MIL C 81309 : E | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING ULTRA-THIN FILM |
| MIL-C-46652 Base Document:1962 | Composition B4 |
| MIL-R-22578 Revision B:1964 | Resorcinol |
| MIL-G-81827 Revision A:1983 | Grease, Aircraft, High Load Capacity, Wide Temperature Range |
| MIL-PRF-85336 Revision B:1998 | LUBRICANT, ALL-WEATHER (AUTOMATIC WEAPONS) |
| MIL L 7870 : B | LUBRICATING OIL, GENERAL PURPOSE, LOW TEMPERATURE |
| MIL B 17901 : B | BEARING COMPONENTS, BONDED SYNTHETIC RUBBER, WATER LUBRICATED |
| MIL-C-47220 Revision B:1985 | Coolant Fluid, Dielectric (S/S by MIL-C-87252) |
| MIL-C-6529 Revision C:1958 | Corrosion Preventive, Aircraft Engine |
| MIL C 47113 : B | COMPOUND, HEAT SINK, SILICONE AND/OR NON-SILICONE |
| MIL-HDBK-510 Revision A:2014 | Aerospace Fuels Certification |
| MIL-C-40084 Revision C:1990 | Corrosion Preventive Compound, Water-Emulsifiable, Oil Type |
| MIL P 81716 : 0 | PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE II HYDRAULIC (MINUS 65 DEG F TO PLUS 275 DEG F) |
| MIL W 5521 : B | WASHER, AIRCRAFT HYDRAULIC PACKING BACK UP |
| MIL PRF 5624 : S | TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST |
| MIL-DTL-46014 Revision A:2010 | Lubricating Oil, Spindle |
| MIL-O-46016 Base Document:1968 | OIL, QUENCHING (NO S/S DOCUMENT) |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| MIL L 26087 : B | LUBRICATING OIL, RECIPROCATING COMPRESSOR, GROUND SUPPORT |
| MIL-C-0083933 Revision A:1970 | Corrosion Preventive Compound, Cold-Application (for Motor Vehicles) (No S/S Document) |
| MIL-S-85420 Base Document:1980 | SEALING COMPOUNDS, QUICK REPAIR, LOW TEMPERATURE CURING POLYSULFIDE, FOR AIRCRAFT STRUCTURES |
| MIL-DTL-197 Revision M:2016 | Packaging of Bearings, Associated Parts and Subassemblies |
| MIL-PRF-83261 Revision C:2011 | Grease, Aircraft, Extreme Pressure, Anti-Wear |
| DOD L 25681 : D | LUBRICANT MOLYBDENUM DISULFIDE, SILICONE |
| DEFSTAN 91-93/1(1994) : 1994 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 4.5 cSt CORROSION INHIBITED, MARITIME AMBIENT JOINT SERVICE DESIGNATION: OX-22 |
| VV L 820 : C | LUBRICATING OIL, GENERAL PURPOSE (LIGHT) |
| MIL-L-46017 Base Document:1968 | Lubricating Oil, Machine Tool Slideways (S/S by A-A-59113) |
| MIL L 0063460 : C (3) | LUBRICANT, CLEANER AND PRESERVATIVE FOR WEAPONS AND WEAPON SYSTEMS |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL H 17672 : D | HYDRAULIC FLUID, PETROLEUM, INHIBITED |
| MIL F 46162 : D | FUEL, DIESEL, REFEREE GRADE |
| MIL-S-11031 Revision B:1963 | SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) (S/S BY A-A-59293) |
| MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
| VV-P-216 Revision C:1982 | PENETRATING OIL (FOR LOOSENING FROZEN METALLIC PARTS) (S/S BY A-A-50493) |
| MIL-PRF-27601 Revision C:1998 | Hydraulic Fluid, Fire Resistant, Hydrogenated Polyalphaolefin Base, High Temperature, Flight Vehicle, Metric (No S/S Document) |
| MIL-A-21071 Revision B:1973 | Antifogging Compound, Transparent Aircraft Enclosures (No S/S Document) |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF-SEALING FUEL TANKS (NO S/S DOCUMENT) |
| MIL L 5020 : C | LIQUID, COMPASS, AIRCRAFT |
| MIL-H-46001 Revision D:1989 | Hydraulic Fluids, Petroleum Base, for Machine Tools (S/S by A-A-59354) |
| MIL-PRF-3150 Revision E:2008 | Lubricating Oil, Preservative, Medium |
| MIL-C-43616 Revision C:1981 | Cleaning Compounds, Aircraft Surface (S/S by A-A-59921) |
| MIL G 81322 : E | GREASE, AIRCRAFT, GENERAL PURPOSE, SIDE TEMPERATURE RANGE, NATO CODE NUMBER G-395 |
| MIL-C-11796 Revision C:1986 | Corrosion Preventive Compound, Petrolatum, Hot Application |
| MIL-PRF-6081 Revision E:2014 | Lubricating Oil, Jet Engine |
| MIL F 12070 : D | FOG OIL |
| DEFSTAN 91-93/2(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC: CORROSION INHIBITED, MARITIME JOINT SERVICE DESIGNATION: OX-22 |
| MIL-H-81019 Revision D:1984 | Hydraulic Fluid, Petroleum Base, Ultra-Low Temperature |
| MIL-PRF-53074 Revision A:1998 | Lubricating Oil, Steam-Cylinder, Mineral |
| MIL-PRF-32538 Base Document:2015 | Lubricating Oil, Helicopter Transmission System, Synthetic Base, NATO Code Number: O-165 |
| MIL-DTL-32353 Revision A:2012 | Hydraulic and Lubricating Oil, Synthetic Hydrocarbon Base |
| O-L-172 Revision A:1967 | LEATHER DRESSING, VESICANT GAS RESISTANT (NO S/S DOCUMENT) |
| MIL-C-22395 Revision B:1980 | Compound Sealing, Thermal Insulation Pipe Covering-Fire-, Water-, and Weather-Resistant |
| DEFSTAN 91-101/3(2001) : 2001 AMD 1 2002 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST NATO CODE: O-156 JOINT SERVICE DESIGNATION: OX-27 AND OX-28 |
| MIL C 6864 : C | CLEANING COMPOUND, SOLVENT, OIL COOLER |
| MIL-PRF-907 Revision F:2004 | Antiseize Thread Compound, High Temperature |
| MIL-R-17882 Revision E:1993 | Repair Kits, Metallic Pipe And General Purpose, Damage Control |
| MIL-DTL-38219 Revision D:1998 | Turbine Fuel, Low Volatility, JP-7 |
| MIL-F-81912 Base Document:1973 | Fuel, Expendable Turbine Engine |
| MIL A 907 : E | ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
| MIL-DTL-21567 Revision B:2009 | Compound, Silicone, Soft Film |
| MIL I 25017 : E | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (METRIC) |
| MIL-G-82798 Base Document:1989 | Grease, Calcium (No S/S Document) |
| DEFSTAN 91-100/2(1997) : 1997 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST |
| MIL-L-8937 Revision D:1982 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, NATO Code Number S-1738 (S/S by MIL-L-46010) |
| C-N-200 Revision A:1961 | NEATS FOOT OIL (S/S BY A-A-2884) |
| MIL-C-83019 Base Document:1968 | Coating, Polyurethane, for Protection of Integral Fuel Tank Sealing Compound |
| SAE AMS3050 | Performance Specification Anti-Seize Thread Compound, High Temperature |
| ASTM D 7603 : 2013 : REDLINE | Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils (Withdrawn 2022) |
| NACE SP 04 87 : 2007 | CONSIDERATIONS IN THE SELECTION AND EVALUATION OF RUST PREVENTIVES AND VAPOR CORROSION INHIBITORS FOR INTERIM (TEMPORARY) CORROSION PROTECTION |
| MIL-C-83982 Base Document:1974 | Compound, Sealing, Fluid Resistant (S/S by MIL-S-81733) |
| MIL-DTL-14055 Revision G:2014 | Cup, Hydraulic Brake Actuating Cylinder: Synthetic Rubber |
| ASTM D 2625 : 1994 : R1998 | Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| MIL-C-27725 Revision B:1969 | Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks (S/S by SAE-AMS-C-27725) |
| MIL-PRF-46010 Revision H:2013 | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting NATO Code - S-1738 |
| MIL-L-50096 Revision A:1963 | Laboratory, Petroleum, Base (No S/S Document) |
| MIL-HDBK-510-1 Revision A:2010 | Aerospace Fuels Certification (S/S by MIL-HDBK-510) |
| MIL-G-53006 Base Document:1982 | Gasohol, Automotive, Leaded or Unleaded (S/S by A-A-52530) |
| MIL-L-6082 Revision E:1990 | Lubricating Oil, Aircraft Piston Engine (Non-Dispersant Mineral Oil) (S/S by SAE-J1966) |
| VV-F-800 Revision E:1987 | FUEL OIL, DIESEL (S/S BY A-A-52557) |
| MIL-DTL-6396 Revision F:2008 | Tanks, Fuel, Oil, Cooling Fluids, Internal, Removable Non-Self-Sealing |
| MIL-PRF-27617 Revision G:2011 | Grease, Aircraft and Instrument, Fuel and Oxidizer Resistant |
| DOD-PRF-85734 Revision A:2004 | LUBRICATING OIL, HELICOPTER TRANSMISSION SYSTEM, SYNTHETIC BASE |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| MIL L 0046010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-PRF-87100 Revision A:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, POLYPHENYL ETHER BASE |
| MIL-PRF-87257 Revision C:2017 | Hydraulic Fluid, Fire Resistant; Low Temperature, Synthetic Hydrocarbon Base, Aircraft and Missile |
| MIL-PRF-21260 Revision E:1998 | Lubricating Oil, Internal Combustion Engine, Preservative Break-in |
| MIL G 83261 : A | GREASE, AIRCRAFT, EXTREME PRESSURE, ANTI WEAR |
| MIL-T-22361 Base Document:1960 | THREAD COMPOUND, ANTISEIZE, ZINC DUST-PETROLATUM (S/S BY A-A-59313) |
| ASTM D 2625 : 1994 : R2015 | Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| VV-L-751 Revision D:1981 | LUBRICATING OIL: CHAIN, WIRE-ROPE, AND EXPOSED-GEAR (S/S BY MIL-L-2105 AND MIL-G-18458) |
| MIL-T-13025 Revision C:1966 | Thickener, Incendiary Oil, M2 (No S/S Document) |
| DEFSTAN 91-101/2(1997) : 1997 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5 CST |
| MIL-PRF-24951 Revision B:1995 | FUEL OIL RECLAIMED |
| MIL-S-53021 Revision A:1988 | Stabilizer Additive, Diesel Fuel |
| MIL-PRF-32073 Revision A:2007 | Hydraulic Fluid, Biobased |
| MIL-G-81937 Revision A:1984 | Grease, Instrument, Ultra-Clean, Metric |
| VV-L-825 Revision C:1997 | Lubricating Oil, Refrigerant Compressor, Uninhibited |
| MIL L 53131 : 0 | LUBRICATING OIL, PRECISION ROLLING ELEMENT BEARING, POLYALPHAOLEFIN BASED |
| MIL G 46178 : 0 | GREASE, HELICOPTER, DRIVE SHAFT COUPLING |
| SAE J357_201601 | Physical and Chemical Properties of Engine Oils |
| MIL P 25576 : C | PROPELLANT, KEROSENE |
| A-A-52557 Revision A:2001 | Fuel Oil, Diesel; for Posts, Camps and Stations (S/S by ASTM-D975) |
| MIL-PRF-87252 Revision D:2015 | Coolant Fluid, Hydrolytically Stable, Dielectric |
| MIL-B-913 Base Document:1993 | Bearings, Ball, Annular, for Instruments and Precision Rotating Components (Metric), General Specification for |
| MIL F 16884 : J | FUEL, NAVAL DISTILLATE |
| SAE AMS8660 | Silicone Compound NATO Code Number S-736 |
| SAE J2361_199811 | Lubricating Oil, Internal Combustion Engine, Preservation Break-In |
| SAE AS5780D | Specification for Aero and Aero-Derived Gas Turbine Engine Lubricants |
| MIL-PRF-62218 Revision B:1996 | Corrosion Preventive Compounds, Cold Application (for New and Fielded Motor Vehicles and Trailers) (S/S by A-A-59295) |
| MIL-S-85334 Base Document:1980 | SEALING COMPOUND, NONCURING LOW CONSISTENCY, SILICONE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| MIL-G-6032 Revision D:1984 | Grease, Plug Valve, Gasoline and Oil Resistant, NATO Code Number G-363, Metric (S/S by SAE-AMS-G-6032) |
| MIL-L-23398 Revision D:1985 | Lubricant, Solid Film, Air-Cured, Corrosion Inhibiting, NATO Code Number S-749 |
| SAE MAM3053A | Grease, Water Resistant Polyalphaolefin Base |
| SAE ARP6166 | Minisimulator Method |
| SAE AMSM7866B | Molybdenum Disulfide, Technical, Lubrication Grade |
| MIL-F-53080 Base Document:1988 | Fuel, Engine Design, Referee Grade, Type I and Type II (Metric)(No S/S Document) |
| SAE AIR81D | Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-PRF-25017 Revision H:2011 | Inhibitor, Corrosion/Lubricity Improver, Fuel Soluble (NATO S-1747) |
| MIL-PRF-372 Revision F:2017 | Cleaning Compound, Solvent (for Bore of Weapons) |
| MIL-P-82522 Revision C:1990 | Propellant, Jet Engine, T-H Dimer, Grade RJ-4 (No S/S Document) |
| MIL-PRF-7870 Revision E:2015 | Lubricating Oil: General Purpose, Low Temperature (NATO O-142) |
| MIL-E-5607 Revision F:1983 | Engine, Gas turbine, Preparation for Storage and Shipment of, Process for (No S/S Document) |
| MIL P 26694 : B NOTICE 1 | PROPELLANT, UNS-DIMENTHYLHYDRAZINE - JET FUEL |
| MIL-P-20088 Revision C:1986 | PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST (NO S/S DOCUMENT) |
| O-C-650 Revision B:1975 | CORRECTION FLUID, WHITE, OPAQUE, AND THINNER (NO S/S DOCUMENT) |
| MIL C 8188 : C | CORROSION PREVENTIVE OIL, GAS TURBINE ENGINE, AIRCRAFT SYNTHETIC BASE |
| MIL-B-81793 Revision D:1993 | Bearings, Ball, Annular, for Instruments and Precision Rotating Components |
| MIL F 17111 : B | FLUID, POWER TRANSMISSION |
| MIL-PRF-18458 Revision C:2002 | Grease, Wire Rope and Exposed Gear |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL-I-23310 Revision B:1984 | Inhibitor, Corrosion, Volatile, Oil Type (No S/S Document) |
| MIL P 87107 : C | PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10 |
| MIL L 2105 : D | LUBRICATING OIL, GEAR, MULTI PURPOSE |
| MIL-H-53119 Base Document:1991 | Hydraulic Fluid, Nonflammable, Chlorotrifluoroethylene Base |
| MIL T 25524 : D | TURBINE FUEL, AVIATION, THERMALLY STABLE |
| VV L 765 : A NOTICE 1 | LUBRICANT, ENCLOSED-GEAR, NONEXTREME-PRESSURE |
| MIL-PRF-18487 Revision A:1972 | Compound, Gun Slushing |
| DOD L 85336 : A | LUBRICANT, ALL WEATHER (AUTOMATIC WEAPONS) |
| SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
| MIL-G-25013 Revision E:1983 | Grease, Aircraft, Ball and Roller Bearing, NATO Code Number G-372, Metric |
| MIL-PRF-10924 Revision H:2008 | Grease, Automotive and Artillery |
| MIL H 7061 : B | HOSE, RUBBER, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| MIL-PRF-46170 Revision E:2013 | Hydraulic Fluid, Rust Inhibited, Fire Resistant, Synthetic Hydrocarbon Base, NATO Code No. H-544 |
| MIL-PRF-5606 Revision H:2002 | Hydraulic Fluid, Petroleum Base; Aircraft, Missile, and Ordnance |
| MIL-L-22851 Revision D:1990 | Lubricating Oil, Aircraft Piston Engine (Ashless Dispersant) (S/S by SAE-J1899) |
| MIL-H-22072 Revision C:1984 | Hydraulic Fluid, Catapult, NATO Code Number H-579 |
| SAE AMS3267B | Sealing Compound, Low Adhesion, Corrosion Inhibiting, for Removable Panels and Fuel Tank Inspection Plates |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM D 6185 : 2011 : R2017 | Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases |
| ASTM D 2625 : 1994 : R2010 | Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method) |
| MIL-C-81302 Revision D:1985 | Cleaning Compound, Solvent, Trichlorotrifluoroethane |
| MIL-PRF-81322 Revision G:2005 | Grease, Aircraft, General Purpose, Wide Temperature Range, Nato Code G-395 |
| MIL-DTL-17901 Revision C:2005 | Bearing Components, Bonded Synthetic Rubber, Water Lubricated |
| MIL-F-47174 Revision A:1977 | Fluid, Hydraulic, Petroleum Base Intermediate Viscosity (No S/S Document) |
| VV-D-1078 Revision B:1983 | Damping Fluid, Silicone Base (Dimethyl Polysiloxane) |
| MIL H 27601 : B | HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC |
| SAE AMSL81846 | Lubricating Oil, Instrument, Ball Bearing, High Flash Point |
| DEFSTAN 91-100/3(2001) : 2001 | LUBRICATING OIL, GAS TURBINE ENGINE, SYNTHETIC GRADE 5CST NATO CODE: O-160 JOINT SERVICE DESIGNATION: OX-26 |
| SAE AS8660 | Silicone Compound NATO Code Number S-736 |
| MIL-DTL-5521 Revision C:2007 | Washer, Aircraft Hydraulic Packing Back-Up |
| SAE AMS2518D | Thread Compound, Anti-Seize, Graphite-Petrolatum |
| MIL L 2104 : F | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
| MIL D 36471 : NOTICE 1 | DISK, COLOR STANDARD, ANTI ICING ADDITIVE |
| MIL-G-46003 Revision A:1976 | Grease, Rifle (No S/S Document) |
| API 5A3 RUSSIAN : 2015 | RECOMMENDED PRACTICE ON THREAD COMPOUNDS FOR CASING, TUBING, LINE PIPE, AND DRILL STEM ELEMENTS |
| MIL-DTL-46162 Revision E:2002 | Fuel, Diesel, Referee Grade (No S/S Document) |
| MIL-L-27502 Base Document:1972 | Lubricating Oil, Aircraft Turbine Engine, Ester Base (No S/S Document) |
| MIL-G-4343 Revision C:1978 | Grease, Pneumatic System (S/S by SAE-AMS-G-4343) |
| DOD L 24651 : 0 | LUBRICATING OIL, FOOD GRADE, FOOD PROCESSING EQUIPMENT (METRIC) |
| MIL-STD-1262 Base Document:1967 | DEGRADATION TESTS FOR FUELS AND FUEL CONTAINER COATINGS (TEST PROCEDURE) (NO S/S DOCUMENT) |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| MIL-PRF-32033 Revision A:2016 | Lubricating Oil, General Purpose, Preservative (Water-Displacing, Low Temperature) |
| DOD-G-85733 Base Document:1986 | GREASE, HIGH TEMPERATURE, CATAPULT SYSTEM |
| MIL-C-5545 Revision C:1983 | Corrosion Preventive, Aircraft Engine, Heavy Oil Type (No S/S Document) |
| SAE AMSG4343A | Grease, Pneumatic System |
| SAE AMS3058 | Grease: Wide Temperature Range Lithium or Lithium Complex Thickened for Aircraft Wheel Bearings |
| SAE AS87132 | Lubricant, Cetyl Alcohol, 1-Hexadecanol, Application to Fasteners |
| SAE J2359_199811 | Lubricating Oil, Internal Combustion Engine, Military Combat/Tactical Service |
| ASTM D 4739 : 2017 : REDLINE | Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| ASTM D 6547 : 2016 : REDLINE | Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
| ASTM E 1 : 2014 : REDLINE | Standard Specification for ASTM Liquid-in-Glass Thermometers |
| SAE J1966_201108 | Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil) |
| MIL-PRF-7808 Revision L:1997 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base |
| ASTM D 524 : 2015 : REDLINE | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| SAE AMS6260S | Steel, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (9310) |
| ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
| SAE AMS6475K | Steel, Nitriding, Bars, Forgings, and Tubing 1.1Cr – 3.5Ni – 0.25Mo – 1.2Al (0.21 – 0.26C) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.