FED-STD-595 Revision C:2008
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COLORS USED IN GOVERNMENT PROCUREMENT
Available format(s)
PDF
Superseded date
14-02-2017
Superseded by
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. Scope
2. Referenced Documents
3. Definitions
4. General Requirements
5. Detailed Requirements
6. Notes
7. Concluding Material
Appendices
I - Pigments Used in FED-STD-595C Master Standard
II - New Colors Added in 2007
III - CIELAB Values for Select Colors
IV - Master Color List
V - Notes
Covers the colors used by Government Activities in a format suitable for color selection, color matching and for quality control inspection. Describes the designation and use of the color chips of this standard.
| Committee |
FSC 8010
|
| DevelopmentNote |
Supersedes DOD P 15146, DOD E 18210, DOD E 18214, DOD E 698 and DOD E 699. (11/2003) C NOTICE 1 - Notice of Change. (09/2008) C NOTICE 2 - Notice of Cancellation/Superseded by SAE AMS STD 595. (02/2017)
|
| DocumentType |
Standard
|
| Pages |
27
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-I-25859 Revision C:1995 | INDICATOR, THRUST AEU-2/A, SYNCHRO STYLE, PRESSURE RATIO, 1.2-3.4 UNITS, INTEGRALLY LIGHTED |
| SAE AMS3792C | TAPE, LOW MODULUS ARAMID 300 (1334), 1000 (4448) AND 8000 (13,345) BREAKING STRENGTH |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| MIL F 0024385 : E | FIRE EXTINGUISHING AGENT, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL-S-52256 Revision C:1990 | SURVEYING INSTRUMENT; AZIMUTH GYRO, LIGHTWEIGHT |
| SAE AMS 7254 : 2014 | PERFLUOROETHER ELASTOMER |
| CCC-C-700 Revision J:1986 | CLOTH, COATED, VINYL COATED (ARTIFICIAL LEATHER) |
| MIL A 85670 : 0 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS -3793/A |
| MIL-PRF-32239 Revision A:2014 | COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
| MIL-P-0081653 Revision C:1987 | POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL C 83166 : LATEST | CONVERTER MULTIPLEXER, SIGNAL DATA, GENERAL SPECIFICATION FOR |
| MIL-I-27674 Revision C:1994 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE MULTIFUNCTION, MINUS 5O DEG TO PLUS 2OO DEG C |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| MIL-I-8580 Revision B:1965 | INDICATOR, TACHOMETER, HELICOPTER, 0-4000 RPM TYPE MA 1 |
| MIL-A-26442 Base Document:1959 | ADAPTERS, WAVEGUIDE TO COAXIAL |
| MIL-I-62523 Base Document:1987 | INSULATION, PANEL, VIBRATION-DAMPENING AND THERMAL-BARRIER |
| DOD-E-18214 Revision B:1978 | ENAMEL, INTERIOR, DECK, DARK GREEN (FORMULA NO. 19) (METRIC) |
| MIL-K-52338 Revision B:1991 | KEEPER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL P 17667 : D | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON CORROSIVE) |
| DOD-S-87956 Base Document:1979 | SHELTER, S-80A AND S-82A |
| UNI EN 4611-002 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| MIL-H-44099 Revision A:1986 | Helmet, Ground Troops and Parachutists (No S/S Document) |
| MIL S 10215 : H | SPEEDOMETER, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES,FLEXIBLE SHAFT ASSEMBLY CORES, ADAPTERS AND TRANSMITTERS |
| MIL C 14522 : D | COMPONENTS, PREFABRICATED STRONG ROOM, PORTABLE: FOR SMALL ARMS AND EQUIPMENT |
| MIL-H-51143 Revision D:1991 | HOOD, TANK CHEMICAL BIOLOGICAL MASK, ABC-M5 |
| KKK-F-2201 Base Document:1986 | FIRE TRUCK, WILDLAND, 4X2, 4X4, GASOLINE OR DIESEL ENGINE, 8,700 POUND TO 32,000 POUND GVWR |
| MIL-I-62676 Base Document:1992 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE (METRIC) |
| MIL-S-55689 Base Document:1969 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778()/GRC |
| MIL-I-18856 Revision B:1969 | INDICATOR, ANGLE OF ATTACK, 28V DC MS28062 AND MS28067 |
| MIL-T-38034 Revision E:1970 | TIMER, FIRE CONTROL, BOMBING, DUAL |
| 11/30250205 DC : 0 | BS EN 6138 - AEROSPACE SERIES - CAP, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| DOD-E-1265 Revision D:1977 | ENAMEL, EXTERIOR, ALKYD, OCEAN GRAY No.17 (FORMULA No 5.0) METRIC |
| MIL-P-85658 Base Document:1986 | PAINT, WATER DISPLACING |
| MIL-P-24351 Revision A:1985 | PRIMER COATING, ALKYD, BLUE (FORMULA NO. 6N35-2) |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| MIL-A-53100 Base Document:1990 | ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP) |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| SAE AS8662 | Knife, Hunting, Sheathed, Survival, Pilot’s |
| SAE AS 4444 : 2013 | FITTINGS, 24 DEGREE CONE FLARELESS, FLUID CONNECTION, 5000 PSI |
| MIL-P-11520 Revision F:1989 | PRESERVATIVE COATING, RUBBER, FOR RUBBER SURFACES |
| AA-C-2786 Base Document:2004 | CABINET, SECURITY, INFORMATION PROCESSING SYSTEM STORAGE, CLASS 5 |
| KKK-T-001985 Base Document:1977 | TRUCKS, LIGHT COMMERCIAL, ELECTRIC POWERED, FRONT OR REAR WHEEL DRIVEN (4X2, 500 TO 3000 POUNDS MINIMUM PAYLOAD) |
| MIL-E-52891 Revision B:1988 | ENAMEL, LUSTERLESS, ZINC PHOSPHATE, STYRENATED ALKYD TYPE |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MS25225 Revision J:2007 | GUARD, SWITCH, 3 POSITION |
| MIL-L-25467 Revision D:1977 | LIGHTING, INTEGRAL, RED, AIRCRAFT INSTRUMENT, GENERAL SPECIFICATION FOR |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| ASTM E 1216 : 2011 : R2016 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| MIL PRF 45322 : G NOTICE 1 | DOLLY, TRAILER CONVERTERS, M197A1, M198A1, AND M354 |
| MIL-PRF-12571 Revision R:1998 | REFRIGERATOR, MECHANICAL, FIELD, PORTABLE WALK-IN, PLUG-IN (150 CUBIC FEET) |
| MIL-T-23759 Revision D:1989 | TANK, ASPHALT STORAGE, WHEEL MOUNTED |
| MIL-A-55674 Revision A:1969 | ANTENNA GROUP AN/TRA-37() |
| MIL-R-29583 Base Document:1992 | RADIO SET |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-DTL-3962-6 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, MALLEABLE IRON, 8 INCH |
| I.S. EN ISO 8835-4:2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| MIL-DTL-81581 Revision B:2006 | HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR |
| A-A-59517 Base Document:1999 | CLOTH, COATED OR LAMINATED, POLYVINYLCHLORIDE (ARTIFICIAL LEATHER) |
| MIL-B-43861 Revision A:1986 | BAG, PLASTIC, MORTUARY |
| A-A-52561 Revision B:2004 | INK, PRINTING: LITHOGRAPHIC OFFSET, WITH DRIER |
| MIL-E-82401 Base Document:1965 | ENAMEL, EXTERIOR, VINYL-ALKYD, RED |
| DOD E 24635 : (1) | ENAMEL, GRAY, SILICONE ALKYD COPOLYMER SEMIGLOSS (FOR EXTERIOR USE) (METRIC) |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| MIL-DTL-28689 Revision C:1997 | CONTAINERS, SHIPPING AND STORAGE, STEEL WALL (WITH AND WITHOUT CABINETRY) |
| SAE AS5604A | COMPASS: MAGNETIC, PILOT'S STANDBY |
| MIL-A-52318 Revision A:1971 | ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY |
| TT-E-509 Revision C:1986 | ENAMEL, ODORLESS, ALKYD, INTERIOR, SEMIGLOSS, WHITE AND TINTS |
| MIL STD 001303 : C | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| BS 7128:1989 | Specification for colour coding of hypodermic needles for single use |
| MIL-A-26846 Revision B:1984 | AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN |
| TT-P-595 Revision A:1972 | PRESERVATIVE COATING, CANVAS |
| MIL-S-55389 Base Document:1973 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778A/GRC |
| MIL-S-55234 Base Document:1963 | STANDING WAVE RATIO-POWER METER, ME-165 ( )/G |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| A-A-3126 Base Document:1972 | COATING SYSTEM: TILE-LIKE HIGH PERFORMANCE ARCHITECTURAL |
| MIL-I-7062 Revision C:1975 | INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR |
| MIL B 0043154 : L | BOOTS, HOT WEATHER |
| MIL-T-22085 Revision E:1994 | TAPES, PRESSURE-SENSITIVE, ADHESIVE, PRESERVATION AND SEALING |
| MIL W 46374 : F | WATCH, WRIST - GENERAL PURPOSE |
| MIL-I-27191 Revision C:1995 | INDICATOR, POSITION, VARIABLE NOZZLE |
| MIL-P-15930 Revision C:1981 | PRIMER COATING, SHIPBOARD, VINYL-ZINC CHROMATE (FORMULA NO. 120 - FOR HOT SPRAY) |
| A-A-3121 Revision A:2004 | PAINT, RUBBER-BASE: FOR INTERIOR USE (CONCRETE AND MASONRY FLOORS) |
| DOD C 22325 : A | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
| MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| AA-O-00250 Revision F Interim Revision:1993 | OFFICE FURNITURE, WOOD, UNITIZED (GENERAL SPECIFICATION) |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL-T-52115 Revision B:1980 | THEODOLITE, SURVEYING, DIRECTIONAL ASTRONOMICAL 0.1 SECOND WITH ACCESSORIES. TRIPOD AND CASES. |
| MIL-B-41816 Revision H:1990 | BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD) |
| MIL-E-19603 Revision C:1974 | ENAMEL, BAKING, FOR ROLLER COAT APPLICATION |
| MIL-DTL-15743-17 Revision B:2007 | Switch, Rotary, Enclosed, Submersible (15 Feet), Contact Maker, Six Pole, Two-Position, Spring-Return, 125 Volts Alternating Current, 10 Ampere, Symbol 2638.1 |
| MIL C 0017124 : D | CORD, DETONATING |
| MIL-T-28691 Base Document:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 65 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER |
| MIL-C-24314 Revision C:1985 | CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK) |
| MIL T 27252 : A | TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS |
| MIL-DTL-24631 Revision A:1997 | PAINT, CAMOUFLAGE FOR SUBMARINES, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-M-8555 Revision C:1984 | MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION |
| MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| PPP-C-1120 Revision D:2012 | CUSHIONING MATERIAL, UNCOMPRESSED BOUND FIBER FOR PACKAGING |
| MIL S 29217 : A NOTICE 1 | SEMITRAILER, BOTTOM DUMP, 18 CUBIC YARD MINIMUM CAPACITY |
| MIL-H-1431 Revision B:1972 | HAMMER, HAND (PITON, MOUNTAIN) |
| MIL-T-83460 Base Document:1975 | TRANSDUCER, MOTIONAL PICKUP TRU-164/A |
| CCC-C-428 Revision G:1987 | CLOTH, DUCK, COTTON; FIRE, WATER, WEATHER, AND MILDEW RESISTANT |
| MIL H 26385 : E | HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT |
| MIL I 7627 : F | INDICATOR, TURN AND SLIP 28V DC |
| MIL-I-83152 Revision B:1974 | INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER) |
| 14/30297676 DC : 0 | BS EN AFCB-3P-003 - AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 3 A TO 25 A, SWITCHING CAPACITY 65 IN - PART 003: WITHOUT AUXILIARY CONTACTS - PRODUCT STANDARD |
| MIL-S-51421 Base Document:1976 | SCREENING, CHEMICAL BIOLOGICAL FILTER |
| MIL-I-7721 Revision D:1992 | INDICATOR, VERTICAL SPEED, 3-INCH |
| 14/30297689 DC : 0 | BS EN AFCB-1P-005 - AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A, 115VAC 400 HZ - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
| MIL-B-52472 Revision C:1987 | BAG SAND POLYPROPYLENE |
| MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
| MIL-S-25948 Revision J:1984 | SUNGLASSES, HGU-4/P (WITH CASE) |
| MIL-L-7768 Revision B:1981 | LIGHT, DESK, AIRCRAFT |
| MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
| MIL-PRF-24712 Revision B:2014 | COATINGS, POWDER, THERMOSETTING |
| MIL-STD-1901 Revision A:2002 | MUNITION ROCKET AND MISSILE MOTOR IGNITION SYSTEM DESIGN, SAFETY CRITERIA FOR |
| A-A-3054 Base Document:1996 | PAINT: HEAT RESISTING (204 DEGREES C) |
| MIL-B-36558 Revision B:1992 | BEDS, ADJUSTABLE |
| MIL-M-48245 Revision B:1988 | MOLDING COMPOUND, HOUSING |
| CGSB 109.4 : 2000 | PASSENGER INFORMATION SYMBOLS |
| MIL-DTL-700 Revision B:1998 | ENAMEL, DECK, INTERIOR, GRAY, (FORMULA NO. 20L) (METRIC) |
| MIL I 27197 : C | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED |
| MIL-S-44384 Base Document:1989 | Suit, Contamination Avoidance, Liquid Protection (Scalp) (No S/S Document) |
| MIL-A-5885 Revision D:1987 | ACCELEROMETER, AIRCRAFT |
| MIL-STD-1411 Revision B:2010 | INSPECTION AND MAINTENANCE OF COMPRESSED GAS CYLINDERS |
| MIL-A-22145 Revision C:1992 | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
| MIL F 29000 : 1986 | MILITARY SPECIFICATION FREQUENCY CONVERTER: SOLID STATE, 5 KVA, WITH TRANSIT CASE |
| MIL-I-27677 Revision E:1990 | INDICATOR, LIQUID OXYGEN QUANTITY |
| MIL-M-49199 Revision A:1985 | Microphone, Linear M-162/AIC General Specification for |
| MIL-T-5483 Revision D:1964 | TRANSMITTER, PRESSURE, SYNCHRO AIRCRAFT 165 DEGREE MOVEMENT |
| MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
| MIL-DTL-27188 Revision C:2006 | INDICATOR, PRESSURE EGU-2/A, OIL, 0-100 PSI |
| TT-P-55 Revision B:1965 | PAINT, POLYVINYL ACETATE EMULSION, EXTERIOR |
| TT-L-50 Revision G:1976 | LACQUER, NITROCELLULOSE, ACRYLIC AND ACRYLIC BUTYRATE, AEROSOL (IN PRESSURIZED DISPENSERS) |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL-B-49436 Revision B:1993 | BATTERIES, RECHARGEABLE, NICKEL CADMIUM, SEALED |
| MIL-C-46168 Revision D:1987 | COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| MIL-C-27298 Revision B:1980 | CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A |
| MIL V 51239 : B | VEGETATION CONTROL AGENT, ORANGE |
| MIL-PRF-26542-7 Revision B:2005 | MICROPHONE ASSEMBLY, M-94B/A |
| MIL-T-38473 Revision A:1972 | TIMER, PRECISION, BOMBING, 0 - 30 MINUTES |
| MIL-B-53081 Base Document:1988 | BERM LINER ASSEMBLIES |
| MIL-C-44371 Revision A:1991 | Coat, Aircrew, Combat (No S/S Document) |
| MIL C 87252 : B | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| MIL-T-85471 Base Document:1981 | TEST SET, INERTIAL MEASURING UNIT 1I, TS 3846/ASM-608V |
| A-A-55469 Revision B:2015 | CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR |
| MIL-T-52369 Revision B:1991 | TOWER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL-PRF-29598 Base Document:1996 | FILM, PROTECTIVE, LEADING EDGE (PRESSURE-SENSITIVE) |
| MIL-PRF-22750 Revision G:2011 | COATING, EPOXY, HIGH-SOLIDS |
| MIL-L-31007 Base Document:1994 | LINER, AIRCREW, BATTLEDRESS, UNIFORM (COAT AND TROUSERS) |
| MIL-DTL-31010 Base Document:1995 | JACKET, AIRCREW, COLD WEATHER, WITH REMOVABLE LINER, AND HOOD |
| MIL-A-38140 Revision B:1977 | ALTIMETER, PRESSURE AAU-16/A |
| MIL-PRF-8565 Revision K:2001 | BATTERY STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL B 81757 : C | BATTERIES & CELLS STORAGE, NICKEL CADMIUM, AIRCRAFT GENERAL SPECIFICATION FOR |
| GG-R-550 Revision B:1981 | ROD, STADIA, FOLDING, WITH CASE |
| MIL F 0051068 : E | FILTER, PARTICULATE, HIGH-EFFICIENCY, FIRE RESISTANT |
| MIL-STD-193 Revision L:1991 | PAINTING PROCEDURES AND MARKING FOR VEHICLES, CONSTRUCTION EQUIPMENT, MATERIAL HANDLING EQUIPMENT, AND SPARE PARTS |
| MIL-I-83262-1 Revision A:1987 | INDICATOR, TEMPERATURE, THERMOCOUPLE EHU-31A/A |
| MIL L 9835 : 0 | LOT NUMBERING OF AMMUNITION |
| A-A-3164 Revision A:2007 | SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT |
| A-A-3130 Revision A:2003 | PAINT (FOR APPLICATION TO WET SURFACES) |
| MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
| MIL-T-12442 Revision D:1992 | TOWER, CABLE ANCHOR |
| MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
| MIL-DTL-19803 Revision G:2007 | CONVERTER, LIQUID OXYGEN, 10-LITER, GCU-24A/A |
| MIL-C-0016809 Revision C:1969 | CASE, MEDICAL INSTRUMENT AND SUPPLY SET, NONRIGID, NO. 4 |
| MIL-C-83286 Revision B:1973 | COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
| MIL-I-29589 Base Document:1991 | INTERROGATOR SET, AN/UPX-24(V) |
| MIL L 14486 : A NOTICE 1 | LACQUER, VINYL RESIN, SEMI-GLOSS |
| MIL-A-49067 Revision A:1984 | Air Traffic Control Central AN/TSW-7A (No S/S Document) |
| MIL-DTL-32238 Base Document:2007 | EXTINGUISHER, FIRE, HALOCARBON (HFC-236FA), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE |
| A-B-2787 Base Document:1992 | BOOMS: FLOATING OIL AND DEBRIS CONTAMINANT, DEPLOYABLE (FOR HARBOR USE) |
| A-A-59124 Base Document:1997 | DECK COVERING, LIGHTWEIGHT, NONSLIP |
| MIL-PRF-6799 Revision L:2010 | COATINGS, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| MIL-P-52258 Revision C:1992 | PICKETS, STEEL |
| MIL-C-44417 Base Document:1991 | CARRIER, BODY ARMOUR, SMALL ARMS PROTECTIVE, AIRCREW, SURVIVAL |
| I.S. EN 4611-002:2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - PART 002: GENERAL |
| MIL-PRF-32171 Revision B:2009 | DECK COATINGS, HIGH DURABILITY |
| MIL-B-43909 Base Document:1974 | BELLOWS, EXPANDABLE SHELTER (MUST) |
| MIL-DTL-32093 Revision A:2005 | INITIATOR, CARTRIDGE ACTUATED JAU-75/A, JAU-76/A, JAU-77/A |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL-R-52807 Revision B:1991 | ROLLER, TRANSOM, BAILEY BRIDGE |
| MIL-B-43436 Revision C:1976 | BAND, MARKER, BLANK, GENERAL SPECIFICATION FOR |
| MIL-DTL-4710 Revision E:2006 | CASE SET, TRANSPORT AND STORAGE |
| MIL-C-87974 Base Document:1985 | COUNTER, ELECTRONIC, DIGITAL READOUT 26.5 GIGAHERTZ (GHZ) CONTINUOUS WAVE (CW) |
| MIL-T-85350 Revision B:1990 | TRANSMITTER, BEACON, LOCATOR T-1438/D |
| PREN 2665-004 : 200P2 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 004: UNC THREAD TERMINALS |
| MIL P 53030 : A | PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
| MIL-A-83162 Revision A:1989 | AMPLIFIER, SYNCHRO, SIGNAL AM-6015/A |
| MIL V 62547 : A (1) | VALVE AND CYLINDER ASSEMBLIES, HALON |
| MIL-P-43043 Revision C:1978 | PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED |
| AA-O-00235 Base Document:1962 | OFFICE FURNITURE, STEEL, SECTIONAL |
| MIL I 27220 : B | INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-8 |
| MIL-PRF-4556 Revision F:1998 | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| TT-S-179 Revision B:1975 | SEALER SURFACE, PIGMENTED OIL, FOR PLASTER AND WALLBOARD |
| TT-P-85 Revision E:1977 | PAINT, TRAFFIC AND AIRFIELD MARKING, SOLVENT BASE |
| MIL-I-83449 Base Document:1974 | INDICATOR SET, LIQUID OXYGEN QUANTITY, A/A24J-21 |
| A-A-1452 Revision C:2007 | LACQUER (SPRAYING, CHEMICAL RESISTANT) |
| MIL-F-22735 Revision C:1980 | FILM, ELASTOMERIC, FLUORESCENT, FOR WEAPONS SYSTEMS |
| MIL B 5806 : F | BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE |
| MIL-I-21206 Revision B:1960 | Indicator, Rate of Flow, Fuel; EFU-7/A (300-5000-15000 PPH) |
| MIL-I-27709 Revision A:1962 | INDICATOR, ATTITUDE ARU-14/A, REMOTE |
| MIL-C-23697 Base Document:1963 | Computer Set, Navigational AN/ASN-42(*) |
| AA-C-001779 Revision G:1996 | FILING CABINET, STEEL, LATERAL AND FRONT TO BACK FILING, LEGAL AND LETTER SIZE MATERIAL, GENERAL OFFICE |
| MIL-A-22669 Base Document:1960 | Amplifier-Power Supply-Receiver AM-2310(*)/ASQ and Antenna AS-909(*)/ARA-48 |
| FAA AC 150/5345-5 : 2006 | SPECIFICATIONS FOR AIRPORT LIGHTING CIRCUIT SELECTOR SWITCH |
| OO-D-2854 Base Document:1994 | DITCHING MACHINE, WHEEL TYPE TRENCHER, CRAWLER-MOUNTED, DIESEL-ENGINE-DRIVEN |
| TT P 1411 : A | PAINT, COPOLYMER RESIN, CEMENTITIOUS (FOR WATERPROOFING CONCRETE AND MASONRY WALLS) |
| MIL-P-63381 Base Document:1980 | PAPER, SHOT SHELL (FOR USE IN AMMUNITION) |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH STRUCTURAL) |
| MIL-A-3339 Revision C:1981 | Anchors, Sea, Life Raft |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| MIL-P-2018 Revision J:1993 | PAINT, FACE, CAMOUFLAGE |
| MIL-PRF-87978 Revision A:1996 | REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE, AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS |
| MIL-S-12158 Revision D:1988 | SEALING COMPOUND, NONCURING, POLYBUTANE |
| MIL-HDBK-1473 Revision A:1997 | Color and Marking of Army Materiel |
| MIL-T-26922 Revision D:1977 | TEST SET, ELECTRICAL POWER A/M24T-8() |
| L-S-125 Revision B:1972 | SCREENING, INSECT, NONMETALLIC |
| MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
| MIL-D-82687 Base Document:1980 | DEVICE, ARMING FIRING, ROCKET MOTOR MARK 298 MOD O |
| MIL-C-10101 Revision F:1968 | CASES, FIELD, OFFICE MACHINE (PLYWOOD) |
| MIL-R-61001 Base Document:1989 | RACKS, STORAGE, LOADED PALLET |
| MIL V 85855 : 0 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL |
| MIL C 0043135 : G | CHICKEN AND CHICKEN PRODUCTS, COOKED, DEHYDRATED |
| MIL-C-14381 Revision A:1963 | CASES, FIRE DIRECTION SET, ARTILLERY |
| MIL-E-46096 Revision C:1973 | ENAMEL, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE, SOLAR HEAT REFLECTING |
| MIL-T-55164 Revision C:1987 | TERMINAL BOARDS, MOLDED, BARRIER, SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL R 87978 : LATEST | REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE: AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS |
| MIL-C-3956 Revision C:1970 | CLOCK, MESSAGE CENTER M2 |
| TT-F-325 Revision A:1965 | FILLER, ENGRAVING, STAMPED MARKING |
| MIL-I-27196 Revision C:1988 | INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED |
| MIL-C-87262 Base Document:1992 | CLOTH, PLAIN WEAVE, POLYBENZIMIDAZOLE/ARAMID BLEND |
| MIL N 27444 : D | NET, CARGO TIEDOWN, PALLETS, HCU-7/E, HCU-15/C, HCU-11/C, AND HCU-16/C |
| MIL T 25620 : C | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| MIL I 27279 : B | INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING |
| MIL-C-5040 Revision H:1994 | Cord, Fibrous, Nylon |
| MIL-DTL-32063 Base Document:2000 | TARPAULINS, COTTON OR POLYESTER, FWWMR |
| TT-P-662 Revision B:1969 | PRIMER SURFACER, SANDING, LACQUER AND ENAMEL TYPE |
| MIL-I-27202 Revision A:1980 | INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM 2-INCH SIZE, INTEGRALLY LIGHTED |
| AA-P-2930 Base Document:1997 | PANEL FOR BUNK BED |
| MIL B 83424 : 0 | BATTERY SYSTEMS, SEALED CELL, NICKEL CADMIUM, INTEGRAL CHARGE CONTROL, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-L-19537 Revision C:1965 | LACQUER, ACRYLIC NITROCELLULOSE GLOSS (FOR AIRCRAFT USE) |
| MIL-C-10632 Revision C:1973 | COVERS AND CASES, TEXTILE, ARMY EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL I 13504 : E NOTICE 1 | IGNITER, BOMB, WP, AN-M23A1 (W/O Fuze) |
| MIL V 60733 : A | VEGETATION CONTROL AGENT BLUE |
| MIL-C-7438 Revision G:1985 | CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
| MIL-B-46966 Base Document:1963 | BURSTER, BOMB, M32 |
| O-C-110 Revision C:1984 | CALCIUM HYDROXIDE, TECHNICAL |
| TT-P-1728 Revision A:1974 | PAINT, LATEX-BASE, INTERIOR, FLAT, DEEP TONE |
| AA-T-00670 Base Document:1964 | TRAY, STATIONARY, METAL, FOR STEEL DESK |
| MIL-C-23367 Base Document:1963 | Computer, Flight Director, Aircraft |
| MIL-STD-129-1 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - AMMUNITION & EXPLOSIVES |
| MIL-DTL-25949 Revision F:1995 | ACCELEROMETER, AIRCRAFT RANGE -5 TO 10G UNITS, INTEGRALLY LIGHTED |
| MIL-I-81971 Revision A:1988 | INK, REACTANT |
| MIL-H-52262 Revision E:1991 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, COLLAPSIBLE 4 INCH |
| MIL-DTL-81581-8 Revision A:2006 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| PREN 3662-005 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
| PREN 4832 : DRAFT 2017 | AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| PREN 3268 : 200P3 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| PREN 4838-004 : DRAFT 2016 | AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A 115 V A.C. 400 HZ CONSTANT FREQUENCY - PART 004: WITH SIGNAL CONTACT - PRODUCT STANDARD |
| PREN 4612-002 : 200P1 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| PREN 3773-004 : 200P2 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| PREN 2794-004 : 200P2 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 004: UNC THREAD TERMINALS |
| PREN 2996-004 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 1 A TO 25 A - PART 004: WITH SIGNAL CONTACT - PRODUCT STANDARD |
| PREN 3662-006 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 006: WITH POLARIZED SIGNAL CONTACT - BUS-BAR VERSION - PRODUCT STANDARD |
| PREN 3661-005 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, - TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
| PREN 3661-006 : 200P1 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 006: WITH POLARIZED SIGNAL CONTACT - BUS BAR VERSION - PRODUCT STANDARD |
| SAE AS 7768 : 2016 | LIGHT, DESK, AIRCRAFT |
| SAE ARP 1616 : 2017 | SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS |
| PIA C 5040 : F | CORD, FIBROUS, NYLON |
| SAE AIR 1273 : 2015 | IDENTIFICATION AND CODING OF FLUID AND ELECTRICAL PIPING SYSTEM FUNCTIONS |
| SAE AIR 6082 : 2016 | CALCULATIONS TO DETERMINE DIMENSIONS FOR BACKUP RINGS TO AS5781, AS5782, AS5860, AS5861 |
| I.S. EN 4686:2014 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30' IN TITANIUM ALLOY - EQUIPPED BLIND FERRULES |
| SAE AS 5944 : 1999 | SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE AIR1093A | NUMERAL, LETTER AND SYMBOL DIMENSIONS FOR AIRCRAFT INSTRUMENT DISPLAYS |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| ASTM F 502 : 2008 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| PIA W 5625 : F | WEBBING, TEXTILE, NYLON, TUBULAR |
| BS EN 2794-004:2014 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A UNC thread terminals. Product standard |
| BS EN ISO 13628-1 : 2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| BS EN 3774-004:2014 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A UNC thread terminals. Product standard |
| ISO 10555-5:2013 | Intravascular catheters — Sterile and single-use catheters — Part 5: Over-needle peripheral catheters |
| BS EN 3662-006:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Bus-bar version. Product standard |
| AA-D-2757 Base Document:1990 | DOOR, VAULT, SECURITY |
| MIL-A-23121 Revision C:1970 | AIRCREW ENVIRONMENTAL, ESCAPE AND SURVIVAL COCKPIT CAPSULE SYSTEM, GENERAL SPECIFICATION FOR |
| A-A-59494 Revision B:2016 | WHEELS AND HUBS FOR INDUSTRIAL PNEUMATIC TIRES |
| MIL-PRF-32271 Revision A:2014 | Non-Rechargeable, Lithium General Specification for |
| AA-C-2859 Base Document:1994 | CABINET, SECURITY, WEAPONS STORAGE |
| MIL-E-24269 Revision B:1988 | EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE |
| A-A-59405 Base Document:1999 | TRUCKS, LIFT, FORK, ELECTRIC, SIT-DOWN, FRONT WHEEL DRIVE, REAR WHEEL STEER FOR SHIPBOARD USE |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| GG S 001090 : A | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, SINGLE COMPRESSOR, MOBILE, 110 VOLT, 60 CYCLE, AC: (FOR EAR, NOSE AND THROAT PROCEDURES) |
| GG-S-00795 Revision B:1990 | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, DOUBLE COMPRESSOR, MOBILE, 115 VOLT; 60 CYCLE, AC (WITH ETHER VAPORIZER) |
| MIL-STD-35-72 Base Document:1974 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, ACTUATORS, ELECTROMECHANICAL, ROTARY |
| MIL-V-87939 Base Document:1989 | VAPOR-SUPPRESSING - FIRE EXTINGUISHING AGENT, FOAM CONCENTRATES FOR USE ON HYPERBOLIC PROPELLANTS |
| MIL P 29183 : B | PANELBOARD, POWER DISTRIBUTION PORTABLE WEATHERPROOF, GENERAL SPECIFICATION FOR |
| MIL-T-83303 Revision C:1988 | TRUCK, FIREFIGHTING, AIRFIELD RAMP, 4X4, A/S32P-20, TWIN AGENT, SKID MOUNTED |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| KKK-T-2807 Base Document:1992 | TRUCKS, LUBRICATING AND FUEL SERVICING 4 BY 2 AND 4 BY 4 |
| MIL-DTL-83406 Revision C:2006 | ANTI-G GARMENT, CUTAWAY, CSU-13B/P |
| A-A-59498 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, DS SAFETY RATED, FOR SHIPBOARD USE |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| OO-L-2880 Base Document:1997 | LAUNDRY UNIT, SKID-MOUNTED, 100 POUNDS (DRY WEIGHT) PER HOUR |
| MIL-A-81973 Base Document:1974 | AIRCREW AUTOMATED ESCAPE SYSTEMS, TEST VEHICLES FOR GROUND TRACK PERFORMANCE TESTING, ROCKET AND/OR JET ENGINE PROPELLED; GENERAL SPECIFICATION FOR |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| AA-F-363 Revision C:1990 | FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| A-A-52475 Revision C:2014 | CHOCK, WHEEL |
| MIL-STD-35-73 Base Document:1974 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, ACTUATORS, ELECTROMECHANICAL, LINEAR |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY |
| MIL-W-5088 Revision L:1991 | Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881) |
| MIL-A-0052767 Revision E:1994 | AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-PRF-7061 Revision E:2014 | HOSE, ELASTOMERIC, AIRCRAFT, SELF-SEALING, AROMATIC FUEL |
| MIL-B-29172 Revision B:1991 | BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN |
| MIL-DTL-29183 Revision C:2003 | PANELBOARDS, POWER DISTRIBUTION, PORTABLE, WEATHERPROOF, GENERAL SPECIFICATION FOR |
| A-A-59492 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, 120 INCH LIFT HEIGHT, DS SAFETY RATED, PNEUMATIC RUBBER TIRES, ROUGH TERRAIN, FOR SHIPBOARD USE |
| MIL-PRF-32167 Revision A:2006 | TRANSIENT VOLTAGE SURGE SUPPRESSOR (TVSS) |
| MIL-A-83477 Revision A:1976 | AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN |
| MIL-A-82175 Base Document:1968 | ARMOR, BODY, FRAGMENTATION, PROTECTIVE: FOOTWEAR |
| MIL STD 750-2 : A | MECHANICAL TEST METHODS FOR SEMICONDUCTOR DEVICES - PART 2: TEST METHODS 2001 THROUGH 2999 |
| BB-E-2879 Revision A:2001 | EXTINGUISHER, FIRE, CARBON DIOXIDE (CO[2]), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE |
| MIL-A-43657 Base Document:1969 | ABSORBER, VAPOR, SYNTHETIC SOLVENT DRY CLEANING UNITS |
| MIL PRF 62180 : D | SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING |
| MIL-C-52788 Revision B:1992 | CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED |
| MIL-DTL-43455 Revision K:2007 | COAT, COLD WEATHER, FIELD |
| MIL-T-83965 Revision B:1990 | TRUCK, FIRE FIGHTING, A/S32P-10, FORCIBLE ENTRY |
| A-A-59493 Base Document:1999 | TRUCK, FORK, REACHING AND TIERING, STAND UP RIDER, ELECTRIC, NON-PALLET STRADDLING, SHIPBOARD |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-DTL-1716 Revision J:1997 | POLE, TENT, TELESCOPIC, ADJUSTABLE 5 FEET TO 9 FEET, MAGNESIUM |
| MIL-G-81559 Revision C:1984 | Gyroscope Assemblies and Attitude and Directional Reference Instruments for Aircraft, Packaging of |
| MIL P 46169 : A | PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBER REINFORCED (FOR GENERAL PURPOSE APPLICATIONS) |
| AA-S-1518 Revision A:1970 | SAFE, TOOL RESISTANT, UNINSULATED, SECURITY |
| MIL-D-28728 Revision B:1986 | DIAL, CONTROL, MULTI-TURN COUNTERS, GENERAL SPECIFICATION FOR |
| MIL-E-20652 Revision F:1986 | EYELETS, METALLIC, AND EYELET WASHERS, METALLIC, GENERAL SPECIFICATION FOR |
| AA-D-600 Revision D:2000 | DOOR, VAULT, SECURITY |
| MIL-DTL-32496 Base Document:2014 | GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| MIL-B-29171 Revision B:1991 | BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
| MIL-PRF-49450 Revision B:2000 | BATTERY, RECHARGEABLE, NICKEL-CADMIUM, VENTED, AIRCRAFT |
| MIL-DTL-82288 Revision C:2000 | TARPAULIN: LAMINATED, VINYL-NYLON OR VINYL-POLYESTER, FLEXIBLE |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| 17/30368766 DC : 0 | PREN 4612-002 - AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| MIL-DTL-6162 Revision C:2000 | GENERATORS AND STARTER-GENERATORS, ELECTRICAL DIRECT CURRENT, NOMINAL 30 VOLTS, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-PRF-32380 Base Document:2011 | BAGS - UNIT PACK BARRIER, CHEMICAL, BIOLOGICAL PROTECTIVE CLOTHING AND ACCESSORIES |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| L-P-509 Revision A:1965 | PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING |
| DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
| TT-E-2784 Revision A:1991 | ENAMEL (ACRYLIC EMULSION, EXTERIOR GLOSS AND SEMIGLOSS) |
| MIL-C-85829 Base Document:1989 | COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| GG C 00225 : A | CHEST, X-RAY FILM PROTECTIVE |
| MIL-R-81876 Revision B:1988 | RECEIVER, TRANSMITTER RADIO SET AN/APX-100(V) |
| BS EN 6138:2017 | Aerospace series. Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems |
| MIL-I-6447 Revision C:1974 | INDICATOR, TRUE AIRSPEED TYPE M 1A |
| MIL-P-48296 Base Document:1974 | POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-T-38328 Revision B:1981 | TAPE, TEXTILE, NYLON, AROMATIC, NONMELTING, REINFORCING |
| MIL-DTL-53084 Revision B:2011 | Primer, Cathodic Electrodeposition, Chemical Agent Resistant |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| TT-F-1098 Revision D:1974 | FILLER, BLOCK SOLVENT THINNER, FOR POROUS SURFACES (CONCRETE BLOCK, CINDER BLOCK, STUCCO, ETC.) |
| MIL-M-87113 Revision A:1993 | MASK, OXYGEN, MBU-10/P |
| AN841 Revision 7:2013 | ADAPTER - HOSE TO FLARED TUBE |
| SAE AMS3733C | POTTING COMPOUND, EPOXY, TWO PART, HIGHLY FILLED, HEAT CURE, HIGH COMPRESSIVE STRENGTH |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| TT-E-527 Revision D:1988 | ENAMEL, ALKYD, LUSTERLESS, LOW VOC CONTENT |
| MIL-DTL-17667 Revision E:2005 | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON-CORROSIVE) |
| TT-P-29 Revision K:1991 | PAINT, LATEX |
| MIL L 46147 : B | LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING) |
| MIL-DTL-3962-1 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, ALUMINUM, 4 INCH |
| MIL-DTL-32201 Revision A:2016 | MIRROR ASSEMBLIES, REARVIEW, HMMWV STYLE, 12X8 INCH (NOMINAL), EXTERIOR MOUNTING |
| MIL C 43701 : 0 | CORD, ELASTIC, NYLON |
| MIL-T-52942 Revision C:1996 | TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION |
| MIL R 23016 : A | RADIO SET AN/ARC-94 |
| MIL P 53022 : B | PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
| TT-P-38 Revision E:1985 | PAINT, ALUMINUM, READY-MIXED |
| MIL-L-83795 Revision B:1994 | LAYOUT DYE, BLUE |
| MIL-P-85710 Base Document:1986 | PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR |
| DOD E 700 : A | ENAMEL, DECK, INTERIOR, GRAY (FORMULA NO.20L) (METRIC) |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| FAA AC 150/5345-28 : 2005 | PRECISION APPROACH PATH INDICATOR (PAPI) SYSTEMS |
| MIL J 39024/11 : F | JACK, TIP, TEST POINT TYPE, PRINTED WIRING TYPE, SINGLE TEST POINT, RIGHT ANGLE, 2-LEG MOUNTING, LOW VOLTAGE, .080 |
| TT-L-47 Revision C:1976 | LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER |
| MIL-DTL-3962-3 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, ALUMINUM, 6 INCH |
| MIL C 915 : F | CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
| MIL F 16377 : G | FIXTURE, LIGHTING, INCANDESCENT, GENERAL LIGHTING 100 WATTS, 120 VOLTS, DRIPPROOF 15 DEGREES, SYMBOLS 89 & 90.2 |
| MIL-P-28642 Base Document:1977 | PAINT (TOPCOAT), VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| MIL-B-16115 Revision G:1991 | BUOYS, MOORING, AND MARKER |
| MIL E 1115 : D | ENAMEL, INTERIOR AND EXTERIOR, ALKYD, WHITE (FORMULA NO. 30) |
| MIL-P-63061 Revision A:1978 | PROJECTILE, 155MM, M692/M731 PLUG, HOUSING FOR |
| MIL-PRF-32521 Revision A:2016 | EXPEDITIONARY SHELTER PROTECTION SYSTEM (ESPS) PANEL MODULE |
| MIL-P-20192 Revision D:1982 | POLE, RANGE, METAL, WITH CASE |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| MIL-C-24782 Base Document:1993 | COATING, POWDERED FLUORPOLYMER FOR USE ON HIGH PRESSURE GAS FLASK INTERIORS |
| MIL P 24441/26 : 0 | PAINT, EPOXY-POLYAMIDE, RED, FORMULA 156, TYPE III |
| MIL-P-38336 Revision A:1994 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
| MIL-C-44356 Base Document:1990 | COAT AND TROUSERS, CHEMICAL PROTECTIVE, AIRCREW, FLAME RESISTANT |
| MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
| MIL-T-62032 Revision H:1991 | TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL |
| MIL-B-18670 Revision A:1976 | BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
| MIL-DTL-62180 Revision E:1998 | SEMITRAILER, FUEL TANKERS: 5000 GALLON, BULKHAUL, AUTOMOTIVE AND AIRCRAFT FUEL SERVICING |
| MIL-P-21415 Revision C:1973 | PROTECTIVE FINISH AND PAINTING FOR POLARIS FLEET BALLISTIC MISSILE |
| MIL F 50449 : B | FILLER, SHEET FORM (FOR USE IN AMMUNITION CONTAINERS) |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL-PRF-32348 Base Document:2010 | POWDER COATING, CAMOUFLAGE CHEMICAL AGENT RESISTANT SYSTEMS |
| MIL-T-44372 Revision A:1991 | Trousers, Aircrew, Combat (No S/S Document) |
| MIL H 53063 : A | HOSE ASSEMBLY, ELASTOMER LIGHTWEIGHT NONCOLLAPSIBLE, FUEL |
| TT-P-47 Revision G:1984 | PAINT, OIL (NONPENETRATING - FLAT, READY-MIXED TINTS AND WHITE) |
| MIL-A-81621 Base Document:1969 | ACCELEROMETER, ELECTRICAL, LINEAR ABU-13/A |
| GG-V-350 Base Document:1990 | VIEWER, DENTAL RADIOGRAPHIC FILM, 110 VOLT, AC-DC |
| MIL-T-29152 Revision C:1988 | TRUCK, FIREFIGHTING, TRACTOR TRAILER TYPE, 100 FOOT AERIAL LADDER, DIESEL ENGINE DRIVEN |
| MIL-A-26624 Revision B:1981 | AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) |
| MIL R 24049 : B | ROPE, POLYPROPYLENE |
| MIL-B-42079 Base Document:1994 | BRACE ASSEMBLY ADJUSTABLE BED |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-M-25047 Revision C:1968 | MARKINGS AND EXTERIOR FINISH COLORS FOR AIRPLANES, AIRPLANE PARTS, AND MISSILES (BALLISTIC MISSILES EXCLUDED) |
| MIL-DTL-24552 Revision B:2001 | TERMINALS AND SEALS, PLUGS AND SWITCH, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR |
| MIL-T-52332 Revision B:1991 | TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL-C-82747 Base Document:1988 | COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
| MIL-I-85671 Base Document:1987 | INDICATOR, FREQUENCY CHANNEL ID-2121A/ARC, ID-2229A/ARC AND ID-2303/ARC |
| MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-B-43154 Revision M:1992 | BOOTS, HOT WEATHER |
| MIL P 45307 : B | PUMP, HYDRAULIC, AXIAL PISTONS, MANUAL, WITH FIRE-CONTROL SWITCH |
| MIL-T-23733 Revision A:1968 | TRANSMITTER, RATE GYROSCOPE T-751 (/AJB-3) |
| MIL R 11767 : F | RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT |
| MIL-I-25091 Revision B:1985 | INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2 |
| TT-L-58 Revision E:1978 | LACQUER, SPRAYING, CLEAR AND PIGMENTED, (GENERAL INTERIOR USE) |
| MIL-I-9443 Revision D:1972 | INDICATOR, TEMPERATURE THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-2 |
| TT-E-001793 Base Document:1972 | ENAMEL, SEMI-GLOSS, FOR METAL AND WOOD FURNITURE |
| TT-P-1565 Revision B:1978 | PAINT, BOOT TOPPING BLACK |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL S 51334 : 0 | SIMULATOR DETECTOR TICKETS, CHEMICAL AGENT: M5 |
| MIL-G-23337 Base Document:1962 | GAGE - PRESSURE, DIAL INDICATING |
| AA C 0010 : B | CABINET, BEDSIDE, METAL, HOSPITAL TYPE |
| MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
| MIL-E-43749 Revision G:1993 | ESCALLOPED POTATOES WITH PORT, DEHYDRATED, COOKED |
| MIL-I-15883 Revision B:1967 | INK, WRITING, PERMANENT, SEAWATER AND FUEL OIL RESISTANT |
| MIL-B-44281 Revision A:1993 | BEVERAGE BASE, POWDER, APPLE CIDER (OPERATIONAL RATION COMPONENT) |
| MIL-H-21065 Revision A:1989 | HARNESS, SAFETY, SWIMMERS |
| MIL-P-52746 Revision C:1994 | PUMP ASSEMBLY, FLAMMABLE LIQUID, CENTRIFUGAL, SELF PRIMING 2 INCH 100 GPM AT 100 FEET TOTAL DYNAMIC HEAD |
| MIL-C-44378 Base Document:1989 | CLOTH PARACHUTE, NYLON, LOW PERMEABILITY SCOPE |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
| MIL-T-85230 Revision A:1992 | TARGET, TOW, AERIAL, TDU-34/A |
| MIL-C-595 Revision E:1990 | CHEESE SPREAD, CHEDDAR (OPERATIONAL RATION COMPONENT) |
| MIL-B-10154 Revision C:1961 | Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document) |
| MIL-B-2059 Revision D:1974 | BAG, WARDROBE: FOR PATIENTS CLOTHING |
| MIL M 26542 : D (1) SUPP 1 | MICROPHONE, DYNAMIC, GENERAL SPECIFICATION FOR |
| AA-R-0045 Base Document:1969 | RACK, STORAGE, LOADED PALLET |
| MIL-A-52100 Revision C:1992 | ADAPTERS: FOR BRIDGE, FLOATING, ALUMINUM, HIGHWAY-TYPE, DECK-BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-M-18012 Revision B:1964 | MARKINGS FOR AIRCREW STATION DISPLAYS DESIGN AND CONFIGURATION OF |
| TT C 2114 : 0 | COATING, OBLITERATING |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL-T-52820 Revision A:1979 | TABLE, DRAWING, STEEL |
| MIL-B-52251 Revision C:1988 | BRACKET, SLING ATTACHMENT, FOR BEAMS AND GIRDERS OF LINE OF COMMUNICATION BRIDGES |
| MIL-T-52806 Revision A:1980 | TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER |
| MIL-C-15104 Revision F:1991 | Cloth, Coated, Flame Resistant, Berth and Bedding Cover (No S/S Document) |
| MIL-T-5666 Revision D:1990 | TAPE, TEXTILE, NYLON, MULTIPLE TUBULAR |
| MIL B 22019 : C | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL P 24441/30 : 0 | PAINT, EPOXY-POLYAMIDE, HAZE GRAY, FORMULA 151, TYPE IV |
| MIL-G-46905 Revision A:1967 | GROMMETS, PLASTIC, FILAMENT WOUND, (FOR SEPARATE LOADED PROJECTILES) |
| MIL H 83511 : 0 | HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATIONS FOR |
| 03/314812 DC : DRAFT SEP 2003 | ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| MIL-M-87977 Base Document:1987 | MAINTENANCE PLATFORM, AIRCRAFT |
| MIL-A-23670 Revision A:1965 | Attitude Heading Reference System HEADING AN/ASN-50(*) |
| MIL-PRF-45316 Revision J:2011 | TRAILER, TANK: POTABLE WATER, 400-GALLON, 2-WHEEL, M149A2 |
| MIL-DTL-35033 Revision F:2000 | DESSERT POWDER, PUDDING, INSTANT |
| TT-P-1510 Revision A:1975 | PAINT, LATEX, EXTERIOR, FOR WOOD SURFACES, WHITE AND TINTS |
| MIL-STD-2046 Base Document:1992 | MARKING SYSTEM, PHOTOLUMINESCENT |
| MIL-DTL-46714 Revision E:1998 | SEMITRAILER, VAN: ELECTRONIC, TACTICAL, 6-TON, 2 WHEEL, M373A2 |
| NF EN 4612-002 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| CSA Z8835.4 : 2006 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| MIL C 46081 : A | COATING COMPOUND, THERMAL INSULATING (INTUMESCENT) |
| MIL-PRF-24049 Revision C:2015 | ROPE, POLYPROPYLENE |
| DOD D 24577 : 0 | DISTILLER SCALE PREVENTIVE TREATMENT FORMULATIONS |
| MIL L 18045 : F (1) | LIFE PRESERVERS, VEST, INHERENTLY BUOYANT |
| MIL-F-17619 Revision E:1981 | FRAME, SERVICE CAP (MAN'S) |
| TT-E-490 Revision E:1975 | ENAMEL, SILICONE ALKYD COPOLYMER, SEMIGLOSS (FOR EXTERIOR & INTERIOR NON RESIDENTIAL USE) |
| MIL H 81581/8 : 0 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| MIL-C-22764 Revision C:1964 | Coder Receiver Transmitter KY-532A/ASQ |
| MIL T 24552 : A | TERMINALS AND PLUGS, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR |
| MIL-A-55468 Revision A:1976 | ANTENNA GROUP OE-4()/GR |
| MIL-B-83769 Revision D:1983 | BATTERY, STORAGE, LEAD ACID, GENERAL SPECIFICATION FOR |
| MIL E 24635 : B | ENAMEL, SILICONE ALKYD COPOLYMER (METRIC) |
| MIL E 11195 : E | ENAMEL, LUSTERLESS, FAST DRY, VOC COMPLAINT |
| MIL-S-8512 Revision D:1974 | SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF |
| MIL-C-5604 Revision B:1962 | COMPASS, MAGNETIC, PILOTS STANDBY |
| MIL-PRF-23377 Revision K:2012 | PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
| MIL-PRF-32006 Base Document:2004 | PROGRAMMABLE CONTROLLER, NAVAL SHIPBOARD |
| MIL-S-87233 Base Document:1985 | SUPPORT EQUIPMENT SYSTEMS (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL L 46171 : NOTICE 1 | LACQUER, LUSTRELESS, HOT SPRAY FOR TIP IDENTIFICATION OF AMMUNITION (FOR PROCUREMENT USE MIL-L-1195) |
| DOD-STD-35-36 Revision B:1979 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM SEALS, GASKETS AND PACKING |
| MIL-B-13136 Revision B:1968 | BATTERIES DRY |
| MIL E 24416 : B | EXTINGUISHING SYSTEM, FIRE, FIXED, AQUEOUS POTASSIUM CARBONATE FOR RANGE AND EXHAUST SYSTEMS (SHIP AND SHORE USE) |
| MIL-B-44359 Revision A:1993 | BUNS, HAMBURGER, SHELF STABLE |
| TT-P-110 Revision C:1977 | PAINT, TRAFFIC BLACK (NONREFLECTORIZED) |
| MIL-A-27471 Revision C:1993 | ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A |
| MIL F 12070 : D | FOG OIL |
| MIL-B-43587 Revision C:1987 | BAG, CHEMICAL PROTECTIVE CLOTHING OUTFIT |
| MIL-DTL-62267 Revision B:1998 | CHASSIS, TANK: ARMORED VEHICLE, BRIDGE LAUNCHER, M60A1 |
| MIL-C-83821 Base Document:1990 | CRANE, WHEEL MOUNTED, CRASH, ROUGH TERRAIN, HYDRAULIC FULL REVOLVING, 4X4, DED, FIGHTER TYPE AIRCRAFT |
| MIL-C-85019 Base Document:1976 | COMPUTER, AIR NAVIGATION, TRUE AIRSPEED, MACH NUMBER, WIND COMPONENTS SUPERSONIC, TYPE MB-9 |
| MIL H 5593 : C | HOSE, AIRCRAFT, LOW-PRESSURE, FLEXIBLE |
| MIL-C-29216 Revision B:1991 | COMPRESSOR UNITS DIESEL ENGINE DRIVEN, HIGH PRESSURE |
| DOD E 1115 : C | ENAMEL, INTERIOR, ALKYD, WHITE [FORMULA NO.30] METRIC |
| MIL-C-9082 Revision H:1986 | CONVERTER, OXYGEN, AIRCRAFT, LIQUID TO GASEOUS, GENERAL SPECIFICATION FOR |
| MIL I 7077 : B | INDICATOR, TEMPERATURE ELECTRICAL RESISTANCE, MULTIFUNCTION -70 DEG TO PLUS 150 DEG. C 2 INCH SIZE |
| MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-B-12570 Revision D:1977 | BAKERY OVEN, TRAILER MOUNTED, M-533 |
| DOD-HDBK-289 Base Document:1986 | LIGHTING ON NAVAL SHIPS (METRIC) |
| TT-P-605 Revision B:1976 | PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS) |
| XX-C-2816 Revision A:2016 | COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER |
| MIL-PRF-38170 Revision H:2000 | TANK, MOBILE STORAGE, LIQUID OXYGEN TMU-27/M |
| L-P-387 Revision A:1963 | PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| MIL-S-83427 Base Document:1974 | SURVIVAL KIT CONTAINERS, CNU-129(V)/P AND CNU-130/P |
| MIL-P-58102 Base Document:1978 | PLASTIC SHEET AND LAMINATES, FLEXIBLE FOR ENVIRONMENTAL PROTECTIVE STORAGE AND SHIPPING SYSTEMS |
| MIL-DTL-53022 Revision C Interim Revision:2007 | PRIMER, EPOXY COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE |
| MIL-P-22298 Revision A:1985 | PAINT, BLACK, POLYISOBUTYLENE (FORMULA NO. 133) |
| MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
| TT-E-489 Revision J:1994 | ENAMEL, ALKYD, GLOSS, (FOR EXTERIOR AND INTERIOR SURFACES) |
| MIL-PRF-19759 Revision F:1997 | CLOTH - WATERPROOF |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| A-A-59168 Revision A:2014 | Layout Fluid (Dye), Blue |
| MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
| TT-P-2756 Revision A:1996 | POLYURETHANE COATING - SELF-PRIMING TOPCOAT, LOW VOLATILE ORGANIC COMPOUND (VOC) CONTENT |
| O-G-491 Revision D:1992 | GLYCEROL, TECHNICAL (HIGH GRAVITY) |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| UNI EN 4612-002 : 2012 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| MIL-S-28633 Revision C:1988 | SHELTER, EQUIPMENT, MULTIPURPOSE |
| MIL-H-51291 Revision B:1991 | HOOD, CHEMICAL BIOLOGICAL MASK M6A2 |
| MIL-T-704 Revision K:1992 | Treatment and Painting of Material |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL P 14105 : D | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| ASTM F 502 : 2008 : R2013 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| MIL-T-28571 Revision G:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1,OOO GPM, 4 BY 2 |
| MIL-DTL-32022 Base Document:1998 | GENERATOR, GAS, FIRE EXTINGUISHER, GGU-16/A, GGU-17/A, GGU-18/A, GGU-19/A, GGU-20/A |
| MIL-M-85831 Base Document:1989 | MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN |
| MIL L 25547 : B | LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13 |
| MIL-DTL-9479 Revision E:1999 | |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| MIL-E-11991 Revision E:1983 | ELECTRONIC, ELECTRICAL, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-A-2334 Revision J:1991 | APRON, TOXICOLOGICAL AGENTS PROTECTIVE, M-2 |
| A-A-2585 Revision A:0993 | DINNERWARE, CHINA (WHITE) |
| MIL F 51320 : A | FUZE, BOMB, M918 |
| MIL-A-62019 Revision B:1969 | ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL-TRACKED, 152 MM, M551; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-38373 Revision B:1975 | CAP, FLUID TANK FILLER |
| MIL I 5356 : A | INDICATOR AIRSPEED, PITOT STATIC TYPE L 7 |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-T-53055 Revision C:1991 | TANK, 3,000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| ZZ-C-450 Revision C:1974 | CLOTH, COATED (RUBBER AND PLASTIC) AND PLASTIC SHEETING FOR HOSPITAL USE |
| MIL-H-53073 Revision B:1993 | HOSE ASSEMBLY, ELASTOMERIC: FUEL DISCHARGE, COLLAPSIBLE |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| MIL-C-44107 Revision C:1991 | COVER, GROUND TROOPS - PARACHUTISTS HELMET |
| MIL-C-43831 Revision B:1988 | CARRIER, INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, PLASTIC, LC 1 |
| MIL-DTL-3962-5 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, ALUMINUM, 8 INCH |
| MIL-S-51422 Revision B:1987 | SHELTER AND ENTRANCE ASSEMBLY - CHEMICAL-BIOLOGICAL SHELTER SYSTEM: INFLATABLE |
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| MIL-PRF-81352 Revision C:2005 | COATINGS, AIRCRAFT TOUCH-UP |
| MIL L 11195 : D | LACQUER, LUSTRELESS, HOT SPRAY |
| MIL C 39024 : A | CONNECTOR, ELECTRICAL, TEST POINT TYPE, PANEL TYPE, SINGLE TEST POINT (THREADED), HIGH VOLTAGE |
| MIL P 26915 : C | PRIMER COATING, ZINC DUST PIGMENTED, FOR STEEL SURFACES |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
| MIL-DTL-85110 Revision B:1997 | BAR, REPEATABLE RELEASE HOLDBACK (RRHB), AIRCRAFT LAUNCHING, GENERAL REQUIREMENT FOR |
| PREN 2996-005 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 1 A TO 25 A - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
| SAE AS50571B | LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| CSA D250 : 2016 | SCHOOL BUSES |
| SAE ARP 4732 : 1997 | COVER SHIPPING FLEXIBLE (NONREUSEABLE) |
| SAE AMS3678D | POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS AND EXTRUSIONS, UNFILLED, PIGMENTED, AND FILLED |
| SAE AS 81099 : 2017 | ELECTRIC DEVICES, SIMPLE, GENERAL SPECIFICATION FOR |
| ASTM D 5486/D5486M : 2006 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| ASTM F 1195 : 1999 | Standard Specification for Rigid Laryngoscopes for Tracheal Intubation-Hook on Fittings for Fiberilluminated Blades and Handles (Withdrawn 2008) |
| ASTM D 5486/D5486M : 2006 : R2012 | Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing |
| I.S. EN ISO 10555-5:2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS (ISO 10555-5:2013) |
| I.S. EN 3774-004:2014 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| I.S. EN 2665-004:2013 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| I.S. EN ISO 13628-1:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| I.S. EN 2794-004:2014 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 20 A TO 50 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| I.S. EN 3773-004:2014 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| I.S. EN 3268:2014 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREE 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| MIL-PRF-32168 Base Document:2004 | VARIABLE SPEED DRIVE SYSTEM FOR INDUCTION AND SYNCHRONOUS MACHINES |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| UFC 4-211-01 : Change 1 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
| MIL-T-9720 Revision F:1984 | Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B |
| SAE ARP1967B | CONTAINERS, SHIPPING AND STORAGE, REUSABLE |
| SAE ARP 1400 : 1999 | RECOMMENDED PRACTICES FOR LUBRICATING OIL FILTERS, GENERAL AVIATION RECIPROCATING ENGINE (PISTON TYPE) AIRCRAFT |
| MIL-DTL-15562 Revision G:1996 | MATTING OR SHEET, FLOOR COVERING, INSULATING FOR HIGH VOLTAGE APPLICATION |
| MIL-P-24441-2 Revision C:1991 | PAINT, EPOXY POLYAMIDE, EXTERIOR TOPCOAT, HAZE GRAY, FORMULA 151, TYPE 1 |
| MIL-T-62735 Base Document:1992 | TRUCKS & TRUCK TRACTORS, MODIFIED, COMMERCIAL |
| MIL-DTL-13714 Revision F:1998 | TRAILER, UTILITY, CABLE REEL, 3.5 TON, M310 |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| NASA KSC SO S 4 : 1982 | RETEST AND REFURBISHMENT OF TYPE "K" COMPRESSED GAS CYLINDERS FOR GASEOUS AIR, HELIUM, HYDROGEN, NITROGEN, AND OXYGEN SERVICE |
| DOD E 24607 : A | ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) |
| NFL 76-010 : 1996 | AEROSPACE SERIES - CONTROL AND VIEWING ELEMENTS - DEFINITION OF THE FUNCTIONS OF AN INTERACTIVE FRONT FACE BASED ON NON-RECONFIGURATING KEYBOARDS |
| MIL-C-52911 Base Document:1976 | CRANE, TRUCK MOUNTED, HYDRAULIC, 25 TON COMMERCIAL CONSTRUCTION EQUIPMENT (CCE) |
| MIL-O-44109 Revision B:1990 | OVERALL, COMBAT VEHICLE CREWMAN S |
| MIL-B-14632 Revision C:1991 | BADGE, QUALIFICATION, ROTC AND NDCC, GENERAL SPECIFICATION FOR |
| MIL-C-1410 Revision F:1985 | CHAIN, HOOK AND RING ASSEMBLY, TENT |
| AA-F-355 Revision B Interim Revision:1972 | FILING CABINET STEEL, LEGAL AND LETTER SIZE, INSULATED |
| MIL-HDBK-759 Revision C:1995 | HANDBOOK FOR HUMAN ENGINEERING DESIGN GUIDELINES |
| MIL-E-51420 Revision A:1983 | EDGESEAL MATERIAL, CHEMICAL-BIOLOGICAL FILTER |
| MIL-E-46145 Base Document:1970 | ENAMEL, FUNGUS RESISTANT, LUSTRELESS, QUICK DRYING, STYRENATED ALKYD TYPE |
| FAA AC 150/5345-45 : 2007 | LOW-IMPACT RESISTANT (LIR) STRUCTURES |
| MIL-I-5418 Revision B:1963 | INDICATOR: AIRSPEED, PITOT STATIC, SENSITIVE, 50-650 KNOTS |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| MIL-PRF-25620 Revision D:1997 | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| MIL-L-24247 Revision C:1990 | LIFE PRESERVER, VEST TYPE, U.S. NAVY, MARK 1 |
| AA-L-2931 Base Document:1997 | LOCKER, CLOTHING, STEEL, TWO DOOR |
| MIL-E-87235 Base Document:1985 | EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
| MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
| TT-P-31 Revision D:1973 | PAINT, OIL, IRON-OXIDE, READY-MIXED, RED AND BROWN |
| MIL-K-8662 Revision E:1974 | KNIFE, HUNTING, SHEATHED, SURVIVAL PILOT S |
| MIL-L-50096 Revision A:1963 | LABORATORY, PETROLEUM, BASE |
| MIL-B-43049 Revision D:1992 | BACKING PLATES, INSIGNIA, BRANCH OF SERVICE AND CAP, INFANTRY, ARMY |
| TT-P-002119 Base Document:1980 | PAINT, LATEX BASE, HIGH TRAFFIC AREA, FLAT AND EGGSHELL FINISH (LOW LUSTRE), (FOR INTERIOR USE) |
| TT-E-485 Revision F:1968 | ENAMEL, SEMI-GLOSS, RUST-INHIBITING |
| CGSB-1.28 : 1998 | EXTERIOR ALKYD HOUSE PAINT |
| FAA AC 150/5345-3 : 2007 | SPECIFICATION FOR L-821, PANELS FOR THE CONTROL OF AIRPORT LIGHTING |
| FAA AC 150/5340-30 : 2008 | DESIGN AND INSTALLATION DETAILS FOR AIRPORT VISUAL AIDS |
| MIL-L-3851 Revision E:1991 | LOOP, SLIDE [FOR EQUIPAGE] |
| MIL P 24441/28 : 0 | PAINT, EPOXY-POLYAMIDE, YELLOW, FORMULA 158, TYPE III |
| MIL-A-22765 Base Document:1961 | Amplifier-Power Supply-Receiver AM-2349/ASQ-19 and AM-2349A/ASQ-19 and Antenna AS-909/ARA-48 and AS-909A/ARA-48 |
| MIL P 24441/37 : 1991 | PAINT, EPOXY-POLYAMIDE, YELLOW, FORMULA 158, TYPE IV |
| A-A-59403 Revision A:2008 | |
| MIL-P-21960 Revision B:1967 | PAINTING AND MARKING; WARHEADS, GUIDED MISSILE |
| MIL H 53064 : A | HOSE ASSEMBLY, ELASTOMER, LIGHTWEIGHT, COLLAPSIBLE - LIQUID FUEL |
| MIL-R-44277 Revision A:1990 | RATION, COLD WEATHER, ASSEMBLY OF |
| MIL-S-40626 Revision D:1994 | SIGN KIT, VEHICLE CLASS |
| MIL-I-85506 Base Document:1983 | INDICATOR, INDICATED AIRSPEED, STANDBY TYPES I, II, AND III |
| PIA T 5666 : D | TAPE, TEXTILE, NYLON, MULTIPLE TUBULAR |
| 10/30230908 DC : 0 | BS EN 2665-004 - AEROSPACE SERIES - CIRCUIT BREAKER, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 004: WITHOUT SIGNAL CONTACT - PRODUCT STANDARD |
| SAE AS4459B | FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
| SAE AMS3798C | WEBBING, LOW MODULUS ARAMID |
| MIL-P-22332 Revision B:1972 | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
| TT P 659 : C | PRIMER COATING & SURFACER SYNTHETIC, TINTS & WHITE, (FOR METAL & WOOD SURFACE) |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| MIL-S-7852 Revision B:1968 | SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1 |
| MIL-A-26107 Revision D:1960 | AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3 |
| MIL-T-28690 Base Document:1991 | TRUCK, FIREFIGHTING, STRUCTURAL, 1000 GPM, 4 BY 2 WITH 50 FOOT TELESCOPING BOOM ESCAPE LADDER AND WATER TOWER |
| MIL-C-38404 Revision E:1992 | COUPLING, HOSE, REATTACHABLE SCREW-ON |
| MIL-M-49123 Base Document:1977 | MICROPHONE M-161((/TNS-10 |
| MIL PRF 46714 : D | SEMITRAILER VAN - ELECTRONIC, TACTICAL, 6 TON, 2 WHEEL, M373A2 |
| PIA C 7350 : D | CLOTH, PARACHUTE, NYLON |
| MIL-C-0043584 Revision C:1985 | COUNTER, CHECKOUT, CONVEYOR |
| MIL W 17337 : F | WEBBING, TEXTILE, WOVEN NYLON |
| MIL-M-62515 Base Document:1985 | MAINTENANCE REPAIR KIT, ELECTRICAL, FOR M901A1 AND M981 WEAPONS SYSTEMS |
| MIL-F-22839 Revision D:1988 | FURNITURE, MODULAR TYPE, STEEL, FIELD OFFICE |
| MIL-B-87258 Base Document:1991 | BAG, SLEEPING, ARCTIC SURVIVAL, PRESSURE/VACUUM PACKED |
| MIL-V-8610 Revision B:1984 | VALVE, FUEL SHUTOFF SOLENOID OPERATED, 28 VOLT, DC |
| MIL-S-49036 Base Document:1974 | Suppressor, Electrical Transient (No S/S Document) |
| TT-P-620 Revision C:1968 | PRIMER COATING, CONDITIONER FOR CHALKING EXTERIOR SURFACES |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| A-A-52114 Revision A:1993 | MATTAX, WITH CARRIER |
| A-A-58020 Revision A:1994 | DRUMS, SHIPPING, STEEL WITH POLYETHYLENE INSERT |
| MIL P 24441/20 : 0 | PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE III |
| MIL-I-25852 Revision B:1981 | INDICATOR, TEMPERATURE, THERMO COUPLE EHU-4/A |
| MIL-M-27274 Revision E:1993 | MASK, OXYGEN MBU-5/P |
| TT-S-001992 Base Document:1975 | STAIN, LATEX, EXTERIOR FOR WOOD SURFACES |
| MIL-PRF-38120 Revision B:1997 | INDICATOR, RATE OF FLOW AND TRANSFER EFU-20/A |
| MIL-I-21203 Revision A:1962 | Indicator, Attitude, Spherical, Direct Reading, Fast Erecting, Electric Gyro |
| MIL-DTL-1608 Revision J:2001 | HOOKS, TENT |
| MIL-C-18053 Revision A:1958 | CONTROL AMPLIFIER, ALTITUDE (P-1 AUTOMATIC PILOT RADAR SET, AN/APN-22) |
| PIA C 7219 : C | CLOTH, DUCK, NYLON |
| MIL-M-2418 Revision G:1990 | MITTEN SHELLS, SNOW CAMOUFLAGE, COTTON, WHITE, TWO FINGER |
| MIL-PRF-44103 Revision D:1996 | CLOTH, FIRE, WATER AND WEATHER RESISTANT |
| MIL S 24412 : NOTICE 1 | STEEL, SPECIAL STRUCTURAL SHAPE, WELDABLE, HIGH TENSILE (HT), FOR SUBMARINE HULLS |
| MIL-STD-1303 Revision B:1975 | PAINTING OF NAVAL ORDNANCE EQUIPMENT |
| MIL L 13629 : C NOTICE 1 | LACQUER, AIR DRYING FOR CRIMPED PARTS |
| MIL-PRF-32049 Base Document:1999 | PALLET, FIELD ARTILLERY PROJECTILE |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| UU T 94 : C NOTICE 1 | TAPE, EMBOSSING |
| MIL-DTL-53030 Revision B Interim Revision:2003 | Primer Coating, Epoxy, Water Based, Lead and Chromate Free |
| MIL L 0046010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
| MIL T 5350 : E | TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL P 24441/35 : 1991 | PAINT, EPOXY-POLYAMIDE, RED, FORMULA 156, TYPE IV |
| MIL-B-12233 Revision E:1986 | BAGS, SAND, BURLAP & COTTON |
| DOD-E-18210 Revision B:1978 | ENAMEL, INTERIOR, DECK, RED (FORMULA NO. 23) (METRIC) |
| MIL-B-52489 Revision E:1987 | BARBED TAPE, CONCERTINA |
| MIL-C-29244 Revision A:1992 | CRANE, CONTAINER HANDLING, AIR TRANSPORTABLE |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| MIL-PRF-43473 Revision G:1997 | CLOTH, WATERPROOF |
| SAE AMS F 24610 : 2016 | FIXANT, HOLD DOWN |
| MIL-S-43926 Revision J:1991 | Suit, Chemical Protective (No S/S Document) |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| 09/30201403 DC : 0 | BS EN 3268 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - PRESSURE PLUGS |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| MIL PRF 52849 : D | TEST KIT, PETROLEUM: AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
| MIL-S-87241 Base Document:1985 | SIMULATOR, FLIGHT (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL B 8565 : J | BATTERY AND CELL, STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL E 24021 : J NOTICE 1 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-DTL-31011 Revision B:2005 | CLOTH, WATERPROOF AND MOISTURE VAPOR PERMEABLE |
| MIL-I-87216 Base Document:1984 | INSTRUMENT SYSTEMS, AIRBORNE REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL-DTL-10215 Revision M:2010 | SPEEDOMETERS, TACHOMETERS, FLEXIBLE SHAFT ASSEMBLIES, FLEXIBLE SHAFT ASSEMBLY CORES AND ADAPTERS |
| MIL-R-16417 Revision J:1986 | REPAIR KIT, CO2, INFLATABLE LIFE PRESERVERS |
| MIL C 85629 : A (1) | CONTROL MONITOR SET GUIDED WEAPON, AN/AWW-13 |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| MIL-DTL-87174 Revision A:1998 | HELMET, FLYERS HGU55/P |
| MIL-B-1563 Revision C:1990 | BUTTONS, INSIGNIA AND FINDINGS (U.S.M.A.), GENERAL SPECIFICATION FOR |
| MIL-PRF-85036 Revision B:1999 | BARRIER MATERIALS, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-C-1029 Revision E:1973 | COOKIES, OATMEAL WITH CHOCOLATE CHIPS AND SANDWICH: CANNED |
| MIL T 45333 : D NOTICE 2 | TRAILER, FLAT BED, 10 TON 4 WHEEL M345 |
| 14/30310862 DC : 0 | BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION |
| MIL-I-26382 Revision C:1994 | INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-4 AND A/A24J-8 |
| MIL-I-81454 Base Document:1967 | INDICATOR, GYROSCOPE, VERTICAL REFERENCE ID-1481 (*)/A |
| MIL-B-44078 Revision A:1983 | BEEF PATTIES, PRECOOKED, DEHYDRATED, FOR MEAL, READY-TO-EAT |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL-I-5419 Revision B:1969 | INDICATOR, INDICATED AIRSPEED, PITOT STATIC, MAXIMUM ALLOWABLE SPEED 50-650 KNOTS |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| MIL-T-52296 Revision D:1983 | TRANSOM ASSEMBLY, 60 TON UNIVERSAL TRANSOM |
| MIL-DTL-915 Revision G:2002 | Cable, Electrical, for Shipboard Use, General Specification for |
| MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
| MIL C 24712 : A | COATINGS, POWDER (METRIC) |
| MIL-DTL-28933 Revision C:1997 | SLING, SWORD, SHOULDER - NYLON WEBBING, WHITE |
| DDD-A-1466 Revision C:1991 | APRON, CONSTRUCTION WORKER'S |
| MIL-C-70991 Revision A:1993 | CLOTH, COATED, KEVLAR-29, POLYURETHANE COATED |
| MIL-C-87261 Base Document:1992 | CLOTH, LAMINATED, POLYBENZIMIDAZOLE/ARAMID SUBSTRATE, ACTIVATED CARBON SPHERE, FIRE RESISTANT AND CHEMICAL PROTECTIVE |
| MIL-B-13265 Revision C:1985 | BRIDGES, FIXED, STEEL, RAILWAY, UNIT CONSTRUCTION, 70-FT., 2-GIRDER SPAN: AND CONVERSION SETS: COMPONENTS OF |
| MIL-B-52097 Revision B:1992 | BAR, CARRYING, MULTIPLE AND SINGLE M4 BALK |
| MIL-H-22995 Revision A:1969 | HELMET SHELL ASSEMBLIES, PILOT S PROTECTIVE, APH-6 SERIES |
| MIL-M-48186 Revision B:1990 | MUNITION FOR PROJECTILE, 155MM, HE, M692/M731, LOADING AND ASSEMBLING OF |
| MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-I-85850 Base Document:1987 | Integrated Voice Communications Switching System |
| MIL-A-81852 Revision A:1986 | ALTIMETER-ENCODER AAU-32/A |
| MIL-STD-1223 Revision AC:1991 | NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS' |
| MIL-PRF-83936 Revision C:1996 | REMOVER, PAINT, TANK TYPE - FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS AND OTHER AIRCRAFT AND SUPPORT EQUIPMENT |
| MIL-I-22075 Revision C:1984 | Indicator, Bearing-Distance-Heading ID-663D/U |
| MIL H 8794 : D | HOSE, RUBBER, HYDRAULIC, FUEL AND OIL RESISTANT |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK |
| MIL-STD-642 Revision L:1991 | IDENTIFICATION MARKING OF COMBAT AND TACTICAL TRANSPORT VEHICLES |
| MIL-B-24692 Revision A:1993 | BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC) |
| MIL-T-50009 Revision A:1960 | THICKENER, INCENDIARY OIL, M4 |
| MIL-DTL-18264 Revision E:2015 | FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF |
| MIL-I-85832 Base Document:1989 | INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET |
| SAE AMSP21600A | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL C 20696 : E | CLOTH, COATED, POLYESTER OR NYLON, WATERPROOF |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| MIL-M-4871 Revision C:1984 | MAINTENANCE PLATFORM |
| AA-F-2815 Base Document:1992 | FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE) |
| 14/30297688 DC : 0 | BS EN AFCB-1P-004 - AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A, 115VAC 400 HZ - PART 004: WITH SIGNAL CONTACT - PRODUCT STANDARD |
| CCC-C-422 Base Document:1953 | CLOTH; COTTON, MUSLIN (MERCERIZED) |
| MIL T 29197 : 0 | TRUCK, CLEANER, CATCH BASIN, VACUUM-PRESSURE JET, DED |
| MIL-H-7365 Revision D:1986 | HOSE, AIR DUCT, FOR GROUND HEATERS |
| GG C 225 : NOTICE 1 | CHEST, X-RAY FILM PROTECTIVE |
| MIL I 10986 : F | INDICATORS AND TRANSMITTERS, LIQUID, TEMPERATURE AND PRESSURE |
| TT P 25 : F NOTICE 1 | PRIMER COATING, EXTERIOR UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS |
| MIL-G-0051066 Revision D:1982 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A3 |
| MIL-DTL-32438 Base Document:2013 | HOT BEVERAGE BOX |
| MIL-DTL-27189 Revision E:2008 | INDICATOR, PRESSURE, OIL |
| MIL-G-23676 Base Document:1963 | GAGE, PRESSURE, DIAL INDICATING, OXYGEN, HIGH PRESSURE |
| MIL-STD-129-3 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - SEMIPERISHABLE & PERISHABLE SUBSISTENCE |
| MIL-I-27882 Revision A:1963 | INDICATOR, LIQUID OXYGEN, QUANTITY GMU-37/A |
| MIL I 18373 : B | INSTRUMENT AND NAVIGATION EQUIPMENT, AIRCRAFT, INSTALLATION OF |
| MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
| MIL M 83521 : A | MAINTENANCE KIT, ELECTRICAL CONNECTORS, GENERAL SPECIFICATION FOR |
| MIL-S-22824 Revision E:1993 | SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING) |
| MIL-STD-808 Revision A:1983 | FINISH, MATERIALS AND PROCESSES FOR CORROSION PREVENTION AND CONTROL IN SUPPORT EQUIPMENT |
| A-A-3165 Revision A:2007 | LACQUER, GLOSS, FOR AIRCRAFT USE |
| MIL-C-43808 Revision A:1983 | CLOTH, COATED, NYLON |
| MIL-C-1193 Revision A:1992 | COMPASSES, SHIP, NAVY, NO. 1, MAGNETIC (REFLECTOR TYPE, 7-1/2 INCH CARD) AND BINNACLE, REFLECTOR TYPE |
| MIL-STD-1279 Base Document:1970 | METER, ELECTRICAL INDICATING SELECTION AND USE OF |
| TT-E-508 Revision C:1977 | ENAMEL, INTERIOR SEMIGLOSS, TINTS AND WHITES |
| MIL-B-13889 Revision C:1973 | BRUSHES AND STAFFS, CANNON BORE |
| AFGS-87241 Revision A:1989 | SIMULATORS, FLIGHT |
| MIL S 25073 : 0 | |
| PIA C 3395 : D | CLOTH, NETTING; NYLON OR POLYESTER |
| A-A-52163 Revision B:2012 | LADDERS, VEHICLE-BOARDING |
| PIA C 2005 : 2014 | CLOTH, PARACHUTE, NYLON |
| MIL PRF 13714 : E | TRAILER, UTILITY, CABLE REEL, 3.5 TON, M310 |
| MIL-T-29187 Revision B:1988 | TRUCK, FIREFIGHTING, 100 FOOT REAR MOUNT AERIAL LADDER, 4 BY 2 OR 6 BY 4, DIESEL ENGINE DRIVEN |
| FC 3-260-18F : 2015 | UNIFIED FACILITIES CRITERIA - AIR FORCE AIRCRAFT ARRESTING SYSTEMS (AAS) INSTALLATION, OPERATION, AND MAINTENANCE (IO&M;) |
| TT-P-115 Revision F:1984 | PAINT, TRAFFIC, HIGHWAY, WHITE AND YELLOW |
| MIL-T-21578 Revision A:1966 | TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR |
| MIL-C-87987 Base Document:1989 | CRANE, HYDRAULIC, WHEEL MOUNTED, 7.5 & 15 TON CAPACITIES |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| MIL-W-52482 Revision D:1978 | WATER PURIFICATION UNIT, ELECTRIC MOTOR DRIVEN ERDLATOR TYPE CLARIFIER, DIATOMITE TYPE FILTER, VAN BODY MOUNTED 1,500 GPH |
| MIL H 49198 : A | HEADSET-MICROPHONE KIT, MK-1564( )/AIC |
| MIL-A-22424 Revision A:1967 | ADAPTERS, COMPENSATING, MS281O7, MA-1 COMPASS SYSTEM |
| MIL-B-38401 Revision A:1973 | BEACON SET, RADIO AN/URT-33 |
| MIL I 6839 : C | INDICATOR, POSITION, LANDING GEAR |
| MIL-HDBK-1223 Base Document:1998 | NONTACTICAL WHEELED VEHICLES TREATMENT, PAINTING, IDENTIFICATION MARKING AND DATA PLATE STANDARDS |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| FF-W-84 Revision A:1967 | WASHER, LOCK (SPRING) |
| MIL-PRF-85704 Revision C:1998 | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-P-15931 Revision F:1991 | PAINT, ANTIFOULING, VINYL (FORMULAS NO. 121A, AND 129A) |
| MIL-B-83931 Revision B:1986 | BINDER, FLEXIBLE, TECHNICAL MANUAL |
| MIL-C-83864 Revision A:1982 | CONTAINER, INNER, SURVIVAL KIT |
| MIL-T-27200 Revision C:1975 | TRANSMITTER, RATE GYROSCOPE TRU-2A/A |
| MIL-L-38217 Revision D:1975 | LIGHT, MARKER DISTRESS |
| MIL-B-24222 Revision A:1978 | BAGS , STORAGE, MASK, AIR LINE |
| KK-C-1535 Revision B:1976 | CASE, DISPATCH, MOLDED PLASTIC (METAL FRAME) |
| MIL-C-43303 Revision C:1990 | CORD, ELASTIC, COTTON |
| MIL-PRF-24635 Revision E:2009 | COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
| MIL-B-2505 Revision G:1984 | BUCKLE, CENTER BAR WITH TONGUE |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| MIL-T-52932 Revision D:1991 | TRUCK, LIFT, FORK, INTERNAL COMBUSTION ENGINE, 4000-6000 POUND CAPACITY, GENERAL SPECIFICATION FOR |
| KKK-L-1542 Revision D:1983 | LOADER, SCOOP TYPE, ARTICULATED, FOUR-WHEEL DRIVE |
| MIL-I-5417 Revision D:1968 | INDICATOR, INDICATED AIRSPEED 40-400 KNOTS |
| MIL-I-5721 Revision C:1970 | INDICATOR, INDICATED AIRSPEED 20-250 KNOTS |
| MIL-L-2045 Revision B:1966 | LOOP, STRAP FASTENER [FOR NONEQUIPAGE ITEMS] |
| MIL-A-27328 Base Document:1960 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-7 |
| MIL T 49053 : 0 | TEST SET, RELAY TS-1775()/U |
| MIL-L-36296 Base Document:1964 | LABEL TAPE, PRESSURE SENSITIVE ADHESIVE KEEP OUT OF REACH OF CHILDREN, LEGEND |
| MIL-DTL-27443 Revision F:2003 | PALLETS, CARGO, AIRCRAFT, TYPE HCU-6/E AND HCU-12/E |
| MIL C 19328 : E | CONVERTER, LIQUID OXYGEN, 5 LITER, MBA-5A |
| MIL-I-5482 Revision C:1960 | INDICATOR, PRESSURE, SYNCHRO, AIRCRAFT 165 DEGREE SCALE |
| TT-P-37 Revision C:1968 | PAINT, ALKYD RESIN, EXTERIOR TRIM, DEEP COLORS |
| MIL-DTL-15665 Revision J:1998 | Insignia, Branch of Service, Hat, Garrison Cap and Service, Cap, General Specification for |
| MIL P 28641 : 0 | PRIMER COATING, VINYL CHLORIDE ACETATE COPOLYMER, HIGH BUILD (FOR STEEL AND MASONRY) |
| A-A-52169 Revision B:1995 | INSULATION: SOUND, VIBRATION, AND THERMAL |
| MIL-PRF-32031 Base Document:1998 | GRIT-BLAST MACHINE FOR COMPRESSOR HOUSING ASSEMBLY (T56 SERIES 3) |
| MIL-P-52200 Revision C:1992 | PONTOON BOAT, HALF SECTION, ALUMINUM HULL, SPOON BOW |
| PREN 4838-005 : DRAFT 2016 | AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A 115 V A.C. 400 HZ CONSTANT FREQUENCY - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
| PREN 3773-006 : DRAFT 2015 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 006: 6,3 MM BLADE TERMINAL - PRODUCT STANDARD |
| SAE AS 38386 : 2013 | DUCT ASSEMBLY, GROUND, CONDITIONED AIR, INSULATED, FLEXIBLE |
| SAE AMS 1375 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEMS |
| PREN 2995-004 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 1 A TO 25 A - PART 004: WITH SIGNAL CONTACT - PRODUCT STANDARD |
| SAE ARP798B | DESIGN CRITERIA FOR WHITE INCANDESCENT LIGHTED AEROSPACE INSTRUMENTS |
| SAE AMST22085 | Tapes, Pressure-Sensitive, Adhesive, Preservation and Sealing |
| SAE J2545_201406 | TEST PROCEDURES FOR NON-SAE HYDRAULIC HOSES |
| SAE AS 85376 : 2007 | STAND, SHIPBOARD, HELICOPTER MAINTENANCE |
| SAE AS 8025 : 2016 | PASSENGER OXYGEN MASK |
| I.S. EN 3773-006:2017 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 006: 6,3 MM BLADE TERMINAL - PRODUCT STANDARD |
| SAE AMS 1377 : 2012 | REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT |
| PIA W 1002 C : 2019 | WEBBING, TEXTILE, NYLON TUBE EDGE |
| ASTM E 1161 : 2009 : R2014 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| UNE-EN ISO 10555-5:2014 | Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO 10555-5:2013) |
| BS EN 3661-006:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Bus bar version. Product standard |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| MIL-DTL-39024 Revision C:2014 | JACK, TIP (TEST POINT, PANEL OR PRINTED WIRING TYPE), GENERAL SPECIFICATION FOR |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC E 166 : 2009 | INSTALLATION AND ASSEMBLY, ELECTRICAL GROUND SUPPORT EQUIPMENT (GSE) SPECIFICATION FOR |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| GEIA STD 0006 : 2008 | REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS |
| NASA JSC 08080-2 : 2015 | JSC DESIGN AND PROCEDURAL STANDARDS |
| MS35338 Revision L:1994 | WASHER, LOCK SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| EN 3774-004:2014 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard |
| EN 2794-004:2014 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 004: UNC thread terminals - Product standard |
| MIL-DTL-83361 Revision B:2007 | INDICATOR, PRESSURE, OIL, DUAL, 0-100 PSI, EGU-18/A |
| UNI EN 2794-004 : 2014 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 20 A TO 50 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| UNI EN 3774-004 : 2014 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| UNI EN 2665-004 : 2014 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| IPC HDBK 630 : 0 | GUIDELINES FOR DESIGN, MANUFACTURE, INSPECTION AND TESTING OF ELECTRONIC ENCLOSURES ASSEMBLY |
| UNI EN ISO 10555-5 : 2013 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS |
| UNI EN ISO 8835-4 : 2009 | INHALATIONAL ANAESTHESIA SYSTEMS - PART 4: ANAESTHETIC VAPOUR DELIVERY DEVICES |
| SAE J517_201710 | HYDRAULIC HOSE |
| MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
| MIL-PRF-62218 Revision B:1996 | CORROSION PREVENTIVE COMPOUNDS, COLD APPLICATION (FOR NEW AND FIELD MOTOR VEHICLES AND TRAILERS) |
| MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
| MIL S 12883 : D | SOCKET AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS GENERAL SPECIFICATION FOR |
| MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
| MIL-B-62346 Revision D:1994 | BATTERIES, STORAGE LEAD ACID (LOW MAINTENANCE) |
| MIL-DTL-19328 Revision F:1996 | CONVERTER, LIQUID OXYGEN, 5 LITER, MB-5A |
| MIL-I-21735 Revision A:1969 | Indicator, Airspeed and Mach Number, Pitot Static, 60 to 650 Knots |
| FFF-C-641 Revision D:1975 | SHAVING SOAP AND SHAVING CREAM |
| MIL C 4710 : D | CASE SET, TRANSPORT AND STORAGE |
| MIL-F-18280 Revision F:1995 | FITTING, FLARELESS TUBE, FLUID CONNECTION |
| MIL I 5099 : B | INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| DOD D 87934 : 0 | DESICCANT, MOLECULAR SIEVE (IMPREGNATED (METRIC) |
| MIL-B-87986 Base Document:1989 | BEAD BREAKER, PNEUMATIC TIRE |
| MIL-I-18804 Revision B:1964 | INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH |
| MIL E 46136 : A | ENAMEL, SEMI-GLOSS, ALKYD, SOLAR HEAT REFLECTING, OLIVE DRAB |
| A-A-59892 Revision A:2013 | Cover-Cargo-HEMTT-Truck |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| MIL B 45367 : AA NOTICE 1 | BUSES, MOTOR: TRANSIT, AMBULANCE CONVERSION, FORWARD CONTROL, WITH HIGH HEADROOM, 30 AND 44 PASSENGER, 2 WHEEL DRIVE |
| MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
| MIL-DTL-32028 Base Document:1998 | CORD, DETONATING ASSEMBLY |
| MIL-A-36080 Revision C:1965 | ANESTHESIA SET, ENDOTRACHEAL |
| TT-E-515 Revision A:1971 | ENAMEL, ALKYD, LUSTERLESS, QUICK-DRYING |
| MIL P 24441/29 : 0 | PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE IV |
| MIL-T-83720 Base Document:1968 | TRANSFORMER AND INDUCTORS, NONEXPLOSIVE, GENERAL SPECIFICATION FOR |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| MIL F 0040048 : B INT (1) | FLAGSTAFFS AND INSIGNIA, FLAGSTAFF HEADS, GENERAL SPECIFICATION FOR |
| A-A-50748 Base Document:1987 | HOLSTER, HIP, PISTOL, SEMI AUTOMATIC, 9MM |
| ASTM E 2463 : 2011 : REDLINE | PERFORMANCE SPECIFICATION FOR CARGO BED COVER (CBC) M105A2 TRAILER, TYPE 2 |
| MIL-I-21718 Base Document:1958 | Indicator, Airspeed, Pitot Static, Maximum Allowable Speed, 40-400 Knots |
| MIL-C-6720 Revision C:1964 | CLOCK, AIRCRAFT, ELAPSED TIME, CIVIL DATE 24 HOUR 2 3/4 INCH DIAL |
| A-A-3186 Base Document:2002 | FILE CABINETS, VERTICAL, STEEL |
| AA-F-00360 Revision B Interim Revision:2002 | FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL) |
| MIL-C-20079 Revision H:1987 | CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS |
| TT-P-102 Revision F:1992 | PAINT, OIL, ALKYD MODIFIED, EXTERIOR, WHITE & TINTS |
| A-A-50747 Base Document:1987 | POUCH, AMMUNITION MAGAZINE, 9 MM |
| MIL C 83867 : B | CONNECTOR, OXYGEN MASK HOSE NON-EJECTION TYPE |
| MIL-DTL-32000 Base Document:2003 | Paint, Face, Camouflage |
| MIL-O-83803 Base Document:1977 | OSCILLOSCOPE (AN/USM 425 (V)), 11 MEGAHERTZ (MHZ) GENERAL PURPOSE |
| DEFSTAN 61-12(PT33)/5(2005) : 2005 | WIRES, CORDS AND CABLES ELECTRICAL - PART 33: AIRFRAME WIRES AND CABLES IN THE TEMPERATURE CATEGORIES OF 135 DEGREES C, 200 DEGREES C AND 260 DEGREES C |
| MIL-C-53109 Base Document:1990 | CAN, FUEL, MILITARY, PLASTIC, 5 GALLON CAPACITY |
| PIA C 2004 : 2014 | CLOTH, COATED, PARACHUTE, NYLON |
| FAA AC 150/5345-51 : 2005 | SPECIFICATION FOR DISCHARGE-TYPE FLASHING LIGHT EQUIPMENT |
| MIL C 46883 : 0 | COATING, OPTICAL BLACK |
| MIL L 46142 : 0 | LACQUER, LUSTRELESS, SOLAR HEAT REFLECTING |
| MIL S 9479 : C | |
| CGSB-1.119 : 2000 | INTERIOR LATEX PRIMER-SEALER |
| MIL-H-18911 Revision A:1974 | HEAD AND MOTOR, ROCKET, INERT PARTS, PAINTING AND MARKING |
| MIL S 29580 : B | SPECTACLES, AVIATOR'S, MULTIPLE WAVE LENGTH LASER PROTECTIVE, EDU 5 P (WITH CASE) |
| AA-C-295 Revision A Interim Revision:1963 | CHAIRS, ROTARY, STEEL, TUBULAR SPECIAL PURPOSE |
| MIL-I-26689 Revision C:1981 | INDICATOR, HORIZONTAL SITUATION, AQU-2/A |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| MIL-I-43639 Revision A:1971 | INK, MARKING, NAMETAPE |
| AA-B-00540 Revision D Interim Revision:1978 | BOOKCASE SECTIONS, BASE AND TOP, STEEL, CONTEMPORARY STYLE |
| MIL-B-43404 Revision F:1993 | BEEF STEW, COOKED, DEHYDRATED |
| MIL-PRF-52747 Revision F:1996 | NOZZLE ASSEMBLY, CLOSED-CIRCUIT REFUELING, STANDARD AND ARCTIC SERVICE |
| MIL-I-81508 Base Document:1966 | INDICATOR PLUG, FOR MISSILE PROPELLANTS |
| MIL F 50907 : NOTICE 1 | FIRING DEVICE, ANTI PERSONNEL MINE, XM 123 PARTS & ASSEMBLY |
| MIL-V-5622 Revision A:1963 | Volt-Ammeter, Dual Pointer Direct Current |
| MIL-C-21109 Revision C:1988 | CLOTH, COATED, NYLON, RAFT BOTTOM, |
| MIL-C-43157 Base Document:1963 | CLOTH, SPUN VISCOSE RAYON RESIN IMPREGNATED |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-B-10743 Revision E:1980 | Balloon, Pilot and Ceiling |
| TT-C-495 Revision D:1978 | COATING, EXTERIOR, FOR TINNED FOOD CANS |
| MIL P 82646 : A | PLASTIC FILM, CONDUCTIVE, HEAT-SEALABLE, FLEXIBLE |
| MIL-B-63116 Revision B:1982 | BATTERY, DRY FOR XM122 FIRING DEVICE |
| MIL L 3661 : B | LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR |
| MIL-T-82402 Base Document:1965 | TRANSFORMER, DRY-TYPE, POWER DISTRIBUTION, STEP UP AND STEP DOWN SERVICE, 1000 KVA AND BELOW |
| MIL-PRF-12048 Revision E:1998 | PETROLEUM TESTING KIT, GROUND FUELS |
| MIL-F-85815 Revision A:1993 | FUSE, BOMB, ELECTRONIC FMU-139A/B |
| MIL-S-6551 Revision A:1981 | |
| NASA STD 5008A : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| MIL-I-25931 Revision B:1964 | INDICATOR, POSITION, LANDING GEAR, SYMBOL-INDICATING, INTEGRALLY LIGHTED |
| NASA HDBK 6003 : 2008 | APPLICATION OF DATA MATRIX IDENTIFICATION SYMBOLS TO AEROSPACE PARTS USING DIRECT PART MARKING METHODS/TECHNIQUES |
| TT-P-96 Revision D:1976 | PAINT, LATEX BASE, FOR EXTERIOR SURFACES (WHITE AND TINTS) |
| TT-P-1181 Revision A:1968 | PAINT, STYRENE-ACRYLATE SOLVENT TYPE, TINTS AND DEEP TONES (FOR EXTERIOR MASONRY) |
| TT I 00559 : C | INK, MARKING STENCIL, OPAQUE, FOR POROUS SURFACES (WOOD BOXES, FIBER CARTONS ETC.) |
| MIL-PRF-53027 Revision B:1996 | HOSE ASSEMBLY, RUBBER - LIGHTWEIGHT COLLAPSIBLE, 6-INCH - FOR DRINKING (POTABLE) WATER |
| MIL-P-44151 Revision A:1992 | PACKAGING INTO POUCHES AND MEAL ASSEMBLY OF ORAL LIQUID FEEDING POWDERS |
| PIA C 3953 : F | CLOTH, DUCK, NYLON |
| MIL L 47178 : 0 | LENS, PLASTIC, OPERATION |
| MIL C 27889 : D | COMPUTER, TRANSDUCER, ALTITUDE, ALTITUDE ENCODING, CPU-46/A, GENERAL SPECIFICATION FOR AND MTU-38/A MOUNTING TRAY |
| AA-B-551 Revision D:1973 | BOOKENDS, STEEL |
| MIL-M-49089 Base Document:1976 | MAST AB-864( (/G AND MAST EXTENSION KIT MK-1624) (/G |
| TT P 002118 : LATEST | PAINT, TREE MARKING |
| MIL T 20177 : D NOTICE 1 | MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE |
| MIL-L-5057 Revision F:1981 | LIGHT, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-H-46354 Revision A:1974 | HEADREST, OPTICAL INSTRUMENT |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-L-19538 Revision C:1970 | LACQUER, ACRYLIC NITROCELLULOSE, CAMOUFLAGE (FOR AIRCRAFT USE) |
| MIL-M-81957 Revision B:1990 | MOBILE TEST FACILITY, GAS TURBINE ENGINE TEST SYSTEMS - GENERAL SPECIFICATION FOR |
| MIL-I-85352 Base Document:1980 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING |
| TT P 001952 : C | PAINT, TRAFFIC AND AIRFIELD MARKING, WATERBORNE |
| MIL-C-43256 Revision D:1991 | Cord, Fibrous, Polyester, Solid Braid |
| A-A-2657 Revision A:1997 | BINDER, AWARD CERTIFICATE |
| MIL-T-45917 Revision A:1974 | TARGET MECHANISM, NIGHT FIRING, SMALL ARMS, M40 |
| MIL-E-23155 Revision C:1986 | ESCAPE, APPLIANCE, HOODED, AIR INFLATABLE, WITH POUCH, SUBMARINE PERSONNEL |
| MIL-C-19262 Revision A:1976 | CLOTH, PARACHUTE |
| MIL-V-27296 Revision C:1993 | VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION |
| GG-G-00650 Revision A:1970 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| MIL-DTL-43342 Revision F:2005 | WEBBING ASSEMBLY, GENERAL SPECIFICATION FOR |
| MIL-PRF-32032 Revision A:2003 | CLEANER, STEAM, PRESSURE JET, DIESEL POWERED, TRAILER-MOUNTED |
| MIL-PRF-52666 Revision F:1998 | Filter/Separators, Liquid Fuel |
| SAE AMS 3116 A : 2005 | PRIMER COATING; EPOXY, CHEMICAL AND SOLVENT RESISTANT NON-CHROMATED, CORROSION PREVENTIVE |
| MIL T 81578 : NOTICE 1 | TEST SET, RADAR BEACON AN/APM-230A |
| MIL-R-6106-2 Revision F:1992 | RELAYS, ELECTROMAGNETIC, TYPE I, 4PDT, 1O AMPERES, PERMANENT MAGNET DRIVE, HERMETICALLY SEALED ASSEMBLY |
| M-D-2798 Base Document:1994 | DINNERWARE, CHINA (DECORATED) |
| MIL-C-81991 Base Document:1975 | CONVERTER, AIRCRAFT DC TO DC, BOOST GENERAL SPECIFICATION FOR |
| MIL-I-7723 Revision B:1965 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION 70 DEG TO PLUS 150 DEG.C DUAL |
| MIL-PRF-40039 Revision E:1997 | CLOTH, WATERPROOF |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| A-A-52554 Base Document:1996 | HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
| MIL E 83425 : 0 | EARCUP, SOUND PROTECTIVE MX-8376/AR GENERAL SPECIFICATION FOR |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL G 81188 : B | GLOVES, FLYER'S, SUMMER, TYPE GS/FRP-2 |
| MIL P 14636 : C SUPP 1 | PLAQUE, DISPLAY AND WALL, GENERAL SPECIFICATION FOR |
| MIL-DTL-44285 Revision A:2000 | DOORS, DOUBLE BUMP THROUGH |
| MMM-A-002048 Base Document:1978 | ADHESIVE FIRE RESISTANT THERMAL INSULATION |
| MIL I 25137 : A | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED, TYPE ME-4 |
| MIL-I-22126 Revision B:1972 | INDICATOR, TORQUEMETER, ENGINE, TURBOPROP |
| MIL-I-23366 Revision B:1987 | Indicator, Horizontal Situation ID-1013(*)/A |
| BS EN 4686:2014 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Equipped blind ferrules |
| MIL I 83452 : LATEST | INDICATOR, TAPE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-27280 Revision A:1960 | INDICATOR, INDICATED AIRSPEED AVU-10/A |
| MIL-PRF-83766 Revision B:1997 | FILLER AND PRESSURIZATION UNIT, HYDRAULIC SYSTEM |
| MIL-S-5944 Revision C:1990 | SLING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-24914 Base Document:1984 | ARM SLEEVE, RADIOACTIVE CONTAMINANTS, PROTECTIVE |
| MIL-C-22787 Revision D:1987 | CLOTH, COATED, FUEL AND FLAME RESISTANT |
| MIL-B-29194 Revision B:1994 | BUILDING ADDITION, PREFABRICATED, READY-CUT, METAL RIGID FRAME, FOR 40- BY 100-FOOT BUILDING |
| MIL-PRF-32142 Base Document:2003 | CLOTH, WATERPROOF AND MOISTURE VAPOR PERMEABLE |
| 10/30230917 DC : 0 | BS EN 3773-004 - AEROSPACE SERIES - CIRCUIT BREAKER, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 1 A TO 25 A - PART 004: WITHOUT SIGNAL CONTACT - PRODUCT STANDARD |
| MIL-I-44301 Base Document:1987 | INK, MARKING, DRY FOIL, FOR NAME TAPES. |
| MIL C 44048 : G | COATS, CAMOUFLAGE PATTERN, COMBAT |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL 5,000 AND 10,000 POUND CAPACITIES |
| MIL-I-25861 Revision D:1967 | INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED |
| MIL-C-19941 Revision A:1966 | CONTROLLER, S-2 COMPASS, TYPE |
| MIL-B-49430 Revision C:1991 | BATTERY, NON-RECHARGEABLE, LITHIUM SULFUR DIOXIDE |
| MIL-P-43604 Revision A:1971 | PLASTIC TUBING (FLEXIBLE, POLYURETHANE FILM) |
| MIL-B-28644 Revision A:1988 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK |
| MIL H 87174 : 0 | HELMET, FLYERS' HGU-55/P |
| MIL-S-5804 Revision C:1967 | SEAT, AIRCRAFT, TROOP, WALL STYLE |
| O-S-598 Revision B:1975 | SODIUM HYDROXIDE, TECHNICAL |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| TT-E-506 Revision K:1977 | ENAMEL, ALKYD, GLOSS, TINTS AND WHITE (FOR INTERIOR USE) |
| MIL-C-81946 Base Document:1973 | COATING SYSTEM, THERMAL INSULATION, INTUMESCENT |
| MIL-C-87032 Revision B:1986 | COVERALLS DIVER'S (MK-12) |
| MIL C 55425 : C | CABLE, TELEPHONE WF-16 ()/U |
| MIL-F-60083 Revision E:1970 | FUZE BOMB, ELECTRIC, FMC-7B/B |
| MIL-B-60082 Base Document:1965 | BOMB, CHEMICAL, MARK 116 MOD O (WITHOUT FUZE AND BURSTER) FILLING ASSEMBLY AND MARKING |
| MIL-P-24441-3 Revision C:1986 | PAINT, EPOXY POLYAMIDE, TOPCOAT, WHITE, FORMULA 152, TYPE 1 |
| MIL-C-23070 Revision B:1972 | CLOTH, LAMINATED, AND TAPE, COATED CLOTH, POLYISOPRENE NATURAL OR SYNTHETIC, RUBBER ON NYLON |
| MIL-B-3402 Revision C:1984 | BLOWER, GASOLINE-DRIVEN, AIRCRAFT VENTILATION, PORTABLE 2,900 CFM TYPE A-2 |
| MIL I 83287 : E | INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR |
| SAE AS 7365 : 2013 | Duct Assembly, Ground, Conditioned Air, Metallic Reinforced, Low Pressure, 350 °F |
| MIL W 55153 : A | WIND MEASURING SET AN/PMQ-3 ( ) |
| MIL C 27715 : 0 | CIRCUIT BREAKER, TRIP-FREE, HIGH TEMPERATURE, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| MIL-A-5540 Revision B:1967 | ADHESIVE, POLYCHLOROPRENE |
| MIL-P-38027 Revision A:1973 | PRESSURE INDICATING SYSTEM, HYDRAULIC A/A27 J-1 |
| MIL-S-26716 Revision A:1982 | STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE |
| MIL-C-27718 Revision D:1984 | CRANE, HYDRAULIC, TRUCK MOUNTED, A/S32A-16 16,5OO POUND CRANE CAPACITY, 6X4, DED |
| A-A-50653 Base Document:1981 | MAINTENANCE STAND, SELF PROPELLED, SCISSORS LIFT |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL-H-27269 Revision A:1977 | HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1 |
| MIL-DTL-248 Revision D:2002 | TRINITROTOLUENE (TNT) |
| MIL-T-5608 Revision G:1971 | TAPE, TEXTILE, WEBBING TEXTILE |
| MIL R 83936 : B | REMOVER, PAINT, TANK TYPE, FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS, AND OTHER AIRCRAFT AND AGE COMPONENTS |
| MIL-C-60618 Revision C:1989 | COUNTER, ROTATING, MECHANICAL, DIRECT DRIVE: 8587543 (3200 MIL RESET) |
| MIL-P-45377 Revision A:1980 | POWER SUPPLY. HIGH VOLTAGE, 24 VOLT DIRECT CURRENT |
| MIL-C-1194 Revision D:1984 | CLOCK, QUARTZ CRYSTAL, BATTERY POWERED |
| CCC-C-447 Revision C:1968 | CLOTH, PERCALE, COTTON |
| MIL-L-44299 Revision A:1990 | LINER, COMBAT VEHICLE CREWMEN'S COVERALL |
| MIL-C-10857 Revision D:1974 | CLOTH, ANTIFOGGING |
| MIL-C-38334 Revision A:1971 | CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES |
| MIL PRF 62049 : E NOTICE 1 | SEMITRAILER, VAN: FOR INSTALLATION OF SPECIAL EQUIPMENT, MILITARY DESIGN |
| MS25224 Revision H:2006 | GUARD, SWITCH, 2 POSITION |
| MIL H 0014506 : G | HOSE, AIR DUCT: FOR FILTER UNITS |
| MIL-C-6499 Revision E:1970 | CLOCK, AIRCRAFT MECHANICAL TYPE A 13A |
| X-K-001274 Revision A:1969 | KIT, CLASSIFIED DOCUMENT DESTRUCTOR, DRUM TYPE |
| MIL-G-23723 Base Document:1964 | Gyroscope, Rate Switching CN-495/AJB-3 |
| DOD-HDBK-791 Base Document:1988 | MAINTAINABILITY DESIGN TECHNIQUES |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-B-36039 Revision B:1989 | BAG, GUN CREW FIRST AID KIT |
| MIL-DTL-85097-5 Revision B:1996 | |
| CAN/CSA-ISO 5360:16 | ANAESTHETIC VAPORIZERS - AGENT-SPECIFIC FILLING SYSTEMS |
| MIL STD 795 : 0 | COLORS |
| MIL-R-22679 Base Document:1960 | RECEIVER-TRANSMITTER RADIO RT-559/ASQ-58 AND RT-559A/ASQ-58 |
| NASA KSC STD F 0004 : 2010 | FIRE PROTECTION DESIGN, STANDARD FOR |
| MIL-DTL-62481 Revision A:1998 | INTERCOMMUNICATION CONTROL UNIT |
| MIL P 47160 : 0 | PAINT, OPTICAL, BLACK |
| SAE AMS3143B | POWDER COATING MATERIAL |
| MIL-S-85508 Base Document:1981 | Spectacles, Aviator\'s, Neodymium Laser Protective, EDU-1/P (with case) |
| DOD-STD-35-120 Base Document:1978 | AUTOMATED ENGINEERING DOCUMENT PREPARATION SYSTEM, LENSES, FILTERS, AND MIRRORS (OPTICAL) |
| MIL G 23701 : 0 | MILITARY SPECIFICATION GYROSCOPE, RATE SWITCHING AN/ASN-52 |
| MIL S 38039 : B | SYSTEM, ILLUMINATED, WARNING, CAUTION, AND ADVISORY, GENERAL SPECIFICATION FOR |
| MIL-R-6106-4 Revision D:1993 | RELAYS, ELECTROMAGNETIC, 2PDT, BRACKET & SOCKET ASSEMBLY FOR |
| MIL-PRF-24021 Revision K:1998 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
| MIL-L-24560-26 Base Document:1990 | LIGHT, TASK AND SHIELD ASSEMBLY, FOR USE WITH SYMBOL 190.1 AND 192.1 BRASS LIGHT FIXTURES |
| MIL L 12632 : D | LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR |
| MIL-P-52108 Revision B:1994 | PAINT, WATER EMULSION TYPE (FOR STENCILING AND OBLITERATING) |
| NASA SSTD 8070 0124 : 2014 | IDENTIFICATION OF PIPING SYSTEMS AND ABOVE-GROUND MARKERS |
| MS14113 Revision F:2013 | TAPE, IDENTIFICATION, COLOR CODED, FOR AIRCRAFT TIRES |
| MIL-L-27160 Revision C:1972 | LIGHTING, INSTRUMENT, INTEGRAL, WHITE GENERAL SPECIFICATION FOR |
| SAE AMS3799D | WEBBING, TUBULAR, LOW-MODULUS ARAMID-54 |
| MIL-PRF-52955 Revision D:2009 | IMPROVED POSITION AND AZIMUTH DETERMINING SYSTEM (IPADS) |
| MS25034 Revision K:2006 | GUARD, SWITCH, 3 POSITION |
| TT-P-52 Revision D:1973 | PAINT, OIL (ALKYD OIL) WOOD SHAKES AND ROUGH SIDING |
| MIL-W-17247 Revision B:1974 | Wind Measuring Set AN/UMQ-5 (Components of) |
| MIL-A-19083 Revision C:1987 | ACOUSTIC DEVICES, MINESWEEPING, A MARK 4 (V) MOD 1 AND MARK 4(V) NM |
| TT-E-522 Revision A:1974 | ENAMEL, PHENOLIC, OUTSIDE |
| A-A-52503 Revision B:2010 | MIRROR AND BRACKET ASSEMBLY, REARVIEW |
| MIL-PRF-71196 Base Document:2002 | Sensor, Vehicle Motion |
| PIA C 7020 : E | CLOTH, PARACHUTE, NYLON-RIP STOP AND TWILL WEAVE |
| MIL-I-27665 Revision B:1984 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE ABU-1O/A, -50 DEGREES TO +50 DEGREES C |
| MIL P 24441/22 : 1991 | PAINT, EPOXY-POLYAMIDE, WHITE, FORMULA 152, TYPE III |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| P-C-444 Revision B:1983 | CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
| UU-C-1846 Base Document:1975 | COAT, LABORATORY, DISPOSABLE |
| MIL-I-27203 Revision B:1987 | Indicator, Position, Wing Flap |
| MIL T 45056 : A | TANK RECOVERY VEHICLE,HEAVY N51, PREPARATION FOR STORAGE & SHIPMENT . |
| MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-P-83126 Revision A:1980 | PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR |
| MIL-PRF-32550 Base Document:2016 | METAL-RICH PRIMER |
| MIL-E-5607 Revision F:1983 | ENGINE, GAS TURBINE, PREPARATION FOR STORAGE AND SHIPMENT OF, PROCESS FOR |
| O-C-650 Revision B:1975 | CORRECTION FLUID, WHITE OPAQUE; AND THINNER |
| MIL-P-60312 Revision C:1975 | PARTS, MOLDED, PLASTIC FORM, POLYSTYRENE (FOR USE WITH AMMUNITION) |
| MIL-C-7966 Revision C:1987 | CLOTH, COATED, RUBBER, NYLON BASE |
| MIL C 6799 : J | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| DOD-R-18708 Revision B:1990 | RUST ARRESTING COATING, SHIPBOARD EXTERIOR, GRAY, NAVY FORMULA NO. 123G (METRIC) |
| MIL-C-22325 Revision B:1988 | COLOR, TINTING, FOR INTERIOR NONFLAMING (DRY) PAINTS (METRIC) |
| MIL-PRF-14105 Revision E:2011 | PAINT, HEAT-RESISTING (FOR STEEL SURFACES) |
| MIL P 15183 : B NOTICE 1 | PAINT, EXTERIOR, ALKYD, GRAY, NO. 11 (FORMULA NO 109) (METRIC) |
| MIL-S-13119 Revision E:1984 | SPREADER, SLING, PLATE TYPE, NONADJUSTABLE |
| MIL-P-85034 Base Document:1976 | POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN |
| MIL-B-85584 Revision B:1995 | BATTERY RELAY CONTROL UNIT, AIRCRAFT |
| MIL-L-52043 Revision C:1972 | LACQUER, SEMI GLOSS, CELLULOSE NITRATE |
| BS EN 4612-002:2011 | Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed General |
| MS27752 Revision D:2006 | GUARD, SWITCH, 3 POSITION |
| TT-P-81 Revision E:1973 | PAINT, OIL ALKYD, READY MIXED EXTERIOR, MEDIUM SHADES |
| MIL-T-81921 Base Document:1973 | TEST SET, RADAR BEACON AN/APM-230B |
| MIL-L-24560-9 Revision B:1990 | LIGHTS, NAVIGATION, SIDE, RED AND GREEN, 120 VOLTS, 50 WATTS, ONE LAMP, SYMBOLS 182.2 AND 183.2 |
| MIL-M-43803 Base Document:1972 | MARKINGS, INKED OR PAINTED, OPAQUE, ON NON-POROUS SURFACES |
| MIL P 24441/36 : 1991 | PAINT, EPOXY-POLYAMIDE, NO.50 GRAY, FORMULA 157, TYPE IV |
| AASHTO M 248 : 1991 | SPECIFICATION FOR READY-MIXED WHITE AND YELLOW TRAFFIC PAINTS |
| MIL-PRF-20696 Revision F:1997 | CLOTH, WATERPROOF, WEATHER RESISTANT |
| CGSB-1.118 : 95 AMD 1 97 | INTERIOR FLAT ALKYD FINISH |
| FAA AC 150/5345-12 : 2005 | SPECIFICATION FOR AIRPORT AND HELIPORT BEACONS |
| MIL-P-28582 Base Document:1972 | PRIMER COATING, EXTERIOR, LEAD PIGMENT-FREE, (UNDERCOAT FOR WOOD, READY-MIXED, WHITE AND TINTS) |
| MIL S 0044384 : A | SUIT, CONTAMINATION AVOIDANCE, LIQUID PROTECTION (SCALP) |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| MIL-B-44433 Base Document:1991 | BAG, BARRIER, MULTI-LAYER FILM |
| MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
| MIL C 28754 : D | CONNECTOR, ELECTRICAL, MODULAR AND COMPONENT PARTS, GENERAL SPECIFICATION FOR |
| MIL-A-37953 Base Document:1983 | ANESTHESIA APPARATUS, GAS, NITROUS OXIDE |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| MIL-P-29196 Revision B:1991 | PAVING MACHINES, BITUMINOUS MATERIAL, CRAWLER OR RUBBER TIRE MOUNTED, SELF PROPELLED |
| JSSG-2010-12 Base Document:1998 | Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook |
| MIL-DTL-3962-7 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, DRIVING EQUIPMENT |
| MIL-H-53119 Base Document:1991 | HYDRAULIC FLUID, NONFLAMMABLE, CHLOROTRIFLUOROETHYLENE BASE |
| MIL PRF 12883 : E | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-10986 Revision G:2007 | INDICATORS AND TRANSMITTERS: LIQUID, TEMPERATURE AND PRESSURE |
| MIL-A-28772 Revision C:1984 | ANTENNA, HF, FIXED ROTATABLE LOG PERIODIC |
| MIL-S-48405 Base Document:1973 | Shielded and Confined Mild Detonating Cord Assemblies |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL-T-53029 Revision C:1994 | TANKS, FABRIC, COLLAPSIBLE, 10,000 20,000 AND 50,000 GALLON, DRINKING WATER |
| ASTM E 1216 : 2011 | Standard Practice for Sampling for Particulate Contamination by Tape Lift |
| MIL-DTL-3962-2 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, MALLEABLE IRON 4 INCH |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| MIL C 43455 : J | COAT, COLD WEATHER, FIELD |
| MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
| MIL STD 194 : A NOTICE 2 | SYSTEM FOR PAINTING AND FINISHING FIRE-CONTROL MATERIEL |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
| MIL C 4556 : E | COATING KIT, EPOXY, FOR INTERIOR OF STEEL FUEL TANKS |
| MIL-S-43919 Revision C:1987 | SAUCE AND GRAVY MIXES, DRY, CANNED |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL-B-43064 Revision C:1981 | BINDER, LOOSE LEAF (EQUIPMENT LOGBOOK) |
| MIL-L-83491 Revision A:1978 | LIFE RAFTS, INFLATABLE, LRU-16/P AND LRU-17/P |
| MIL C 10799 : H | CLOTH, COATED, COTTON, VINYL COATED, FIRE AND MILDEW RESISTANT |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| MIL C 52938 : 0 | COVER, AIR SUPPORTED, FOR 25,000 BARREL, EMBANKMENT SUPPORTED, FUEL RESERVOIR |
| MIL B 49450 : 0 | BATTERY, RECHARGEABLE, NICKEL CADMIUM, VENTED, AIRCRAFT,BB-716/A |
| MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
| MIL-A-62247 Base Document:1989 | ARMORED RECONNAISSANCE, AIRBORNE ASSAULT VEHICLE: FULL TRACKED, 152 MM, M551 AND M551A1 (W/LASER RANGE FINDER) (OVERHAUL) |
| MIL-I-27247 Revision C:1985 | INDICATOR, TEMPERATURE, SYNCHRO |
| MIL-B-51254 Base Document:1966 | BREATHING APPARATUS, OXYGEN GENERATING, M20 |
| GG-M-1262 Revision A:1972 | MARKER, TUBE TYPE: WHITE |
| MIL-S-64055 Base Document:1994 | SHOP EQUIPMENT, MECHANICAL MAINTENANCE, SHELTER MOUNTED, EXPANDABLE |
| MIL-D-81227 Revision B:1976 | DETECTOR KIT, WATER, AUTOMOTIVE, AVIATION FUEL |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| MIL-A-27198 Revision B:1987 | ALTIMETER, PRESSURE AAU-7/A |
| MIL-B-15228 Revision G:1988 | BED, BUNK, STEEL, ROUND TUBE, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE) |
| MIL L 51167 : A | LABORATORY, CHEMICAL, BASE, M2A1 |
| MIL-B-40042 Revision E:1988 | BOX, MATCH, WATERPROOF |
| MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
| MIL C 14538 : C | CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
| MIL-P-236 Revision J:1992 | PIPE, CULVERT, NESTABLE |
| MIL-C-24523 Base Document:1975 | CHRONOMETER, QUARTZ CRYSTAL, BATTERY POWERED, METRIC |
| MIL-I-38391 Base Document:1965 | INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE) |
| MIL A 83419 : C | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL-C-17671 Revision F:1989 | CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 |
| MIL H 22199 : E | HELMET, SAILOR S, REINFORCED PLASTIC, MK 3 MOD O |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| TT-E-496 Revision B:1967 | ENAMEL, HEAT-RESISTING (400 DEG. F), BLACK |
| MIL L 24047 : A | LIFE PRESERVER, YOKE TYPE, SCUBA, U.S. NAVY MARK 3 |
| DOD-P-28682 Base Document:1987 | CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC) |
| MIL A 85097 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), PROCUREMENT SPECIFICATION FOR |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| PREN 6138 : DRAFT 2014 CORR 14 | AEROSPACE SERIES - CAPS, PROTECTIVE, NON-METALLIC FOR FLARED AND FLARELESS FITTING ENDS, FOR FLUID SYSTEMS WITH <= 3000 PSI (21000 KPA) WORKING PRESSURE |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000 LB CAPACITY, TYPE MC 1 |
| MIL-P-40029 Revision B:1968 | PANEL MARKER, AERIAL LIAISON, COTTON DUCK, PANEL AL-125 |
| MIL A 3933 : E | ATTENUATORS, FIXED GENERAL SPECIFICATION FOR |
| MIL-R-24414 Revision D:1991 | Reels and Guides, Hose, Firefighting, Manually Operated |
| MIL-T-425 Revision J:1994 | TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END |
| MIL-C-43285 Revision C:1986 | CLOTH, COATED (CHLOROPRENE BASE COATED, CHLOROSULPHONATED POLYETHYLENE TOP COATED) |
| SAE AMS4178E | CORE, FLEXIBLE HONEYCOMB, ALUMINUM ALLOY, TREATED FOR SANDWICH CONSTRUCTION, 5052, 350 (177) |
| MIL T 49316 : LATEST | TEST SET, ELECTRONIC SYSTEMS |
| MIL-A-23899 Revision B:1984 | AURAL PROTECTOR, SOUND |
| MIL-I-83262-2 Base Document:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE, EHU-38/A |
| SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-DTL-3962-4 Base Document:2015 | ANCHORS, GROUND, ARROWHEAD, MALLEABLE IRON, 6 INCH |
| MIL-C-43287 Revision H:1993 | CHILI CON CARNE WITH BEANS, COOKED, DEHYDRATED |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL-I-21685 Base Document:1958 | INDICATOR, COMPASS REPEATER, ROTATING DIAL, TYPE MW-2 |
| MIL-W-26217 Revision B:1985 | Winch, Drum, Power Operated AF/E24H-1, Cargo Loading, 4,000 Pound Capacity, Variable Speed, 28V DC Portable |
| A-A-52558 Revision A:2010 | BREAKERS, PAVING, PNEUMATIC-POWDERED; (0.875 INCH HEXAGON BY 3.25 INCH CHUCK) |
| AA-F-00300 Base Document:1965 | FILE, ROLL DRAWING |
| MIL-A-9597 Revision B:1963 | ANTENNA AT-309()/GPX |
| MIL-C-81774 Revision A:1973 | CONTROL PANEL, AIRCRAFT, GENERAL REQUIREMENTS FOR |
| MIL-A-27261 Revision A:1966 | Accelerometer, Aircraft |
| MIL-P-48189 Revision D:1992 | PROJECTILE, 155MM, HE, M692 AND M731 HOUSING, TIMING AND FUZING FOR |
| MIL P 43184 : 0 | PLATFORM COMPONENTS, AIR DELIVERY. MODULAR (DUAL RAIL SYSTEM), TYPE II |
| KKK-B-1579 Revision B:1985 | BUSES, MOTOR: SCHOOL, WITH HIGH HEADROOM, 20-, 28-, 36-, 44-, 58-PASSENGER, TWO-WHEEL DRIVE |
| MIL-STD-1473 Revision B:1990 | STANDARD GENERAL REQUIREMENTS FOR COLOR AND MARKING OF ARMY MATERIAL |
| MIL-A-81403 Base Document:1967 | ALTIMETER-ENCODER, AAU-21/A |
| MIL-I-81400 Base Document:1966 | INSTRUMENT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| 09/30201406 DC : 0 | BS EN 4686 - AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - EQUIPPED BLIND FERRULES |
| PREN 3774-004 : 200P2 | AEROSPACE SERIES - CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 004: UNC THREAD TERMINALS - PRODUCT STANDARD |
| PREN 4686 : 200P1 | AEROSPACE SERIES - PIPE COUPLING 8 DEGREES 30 MINUTES IN TITANIUM ALLOY - EQUIPPED BLIND FERRULES |
| SAE AIR4012C | USAF AIRCRAFT WHEELS |
| SAE AMS4176C | Honeycomb Core, Aluminum Alloy, for Sandwich Construction, 5056, 350 (175) |
| SAE AS 1046 : 2016 | MINIMUM STANDARD FOR PORTABLE GASEOUS, OXYGEN EQUIPMENT |
| SAE AS50881F | WIRING AEROSPACE VEHICLE |
| SAE AS 6054 : 2006 | DRUM, METAL-SHIPPING AND STORAGE |
| SAE AS23479A | INDICATOR, PRESSURE, 1 1/2-INCH, INTEGRALLY LIGHTED |
| I.S. EN 6138:2017 | AEROSPACE SERIES - CAP, PROTECTIVE, NON-METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| NASM20995:2012 | WIRE, SAFETY OR LOCK |
| BS EN 2995-005:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A With polarized signal contact. Product standard |
| BS EN 3662-005:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Product standard |
| ISO 13628-1:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations |
| BS EN 3773-004:2014 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A UNC thread terminals. Product standard |
| BS EN 2995-004:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A With signal contact. Product standard |
| BS EN ISO 10555-5:2013 | Intravascular catheters. Sterile and single-use catheters Over-needle peripheral catheters |
| ISO 8835-4:2004 | Inhalational anaesthesia systems Part 4: Anaesthetic vapour delivery devices |
| BS EN 2996-005:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A With polarized signal contact. Product standard |
| BS EN 3268:2014 | Aerospace series. Pipe coupling 8°30\' in titanium alloy. Pressure plugs |
| BS EN 3661-005:2006 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A With polarized signal contact. Product standard |
| EN 2996-005:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard |
| EN ISO 10555-5:2013 | Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO 10555-5:2013) |
| EN 3773-006:2017 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 mm blade terminal - Product standard |
| EN 2996-004:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard |
| EN ISO 8835-4:2009 | Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004) |
| EN 3268:2014 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Pressure plugs |
| EN 3773-004:2014 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 004: UNC thread terminals - Product standard |
| EN 3661-005:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard |
| EN 2665-004:2013 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 004: UNC thread terminals - Product standard |
| EN 3662-005:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 005: With polarized signal contact - Product standard |
| EN 6138:2017 | Aerospace series - Cap, protective, non-metallic for fitting ends ≤ 3 000 PSI hydraulic systems |
| EN 3662-006:2006 | Aerospace series - Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus-bar version - Product standard |
| EN 4612-002:2011 | Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General |
| EN 2995-005:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 005: With polarized signal contact - Product standard |
| EN 3661-006:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 20 A to 50 A - Part 006: With polarized signal contact - Bus bar version - Product standard |
| EN 2995-004:2006 | Aerospace series - Circuit breakers, single-pole, temperature compensated, rated current 1 A to 25 A - Part 004: With signal contact - Product standard |
| EN 4686:2014 | Aerospace series - Pipe coupling 8°30' in titanium alloy - Equipped blind ferrules |
| ASTM E 2517 : 2013 : REDLINE | Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer) |
| O M 00232 : H | METHANOL (METHYL ALCOHOL) |
| MIL-DTL-85097 Revision E:2000 | USN/USMC PROPELLANT ACTUATED DEVICES (PADS) - GENERAL SPECIFICATION FOR |
| MIL-B-36120 Base Document:1962 | BACK REST, LITTER, NONADJUSTABLE |
| A-A-3183 Base Document:2000 | PAINT, LATEX, EXTERIOR, (FOR WOOD AND MASONRY) |
| MIL-F-47174 Revision A:1977 | FLUID, HYDRAULIC, PETROLEUM BASE, INTERMEDIATE VISCOSITY |
| MIL C 85285 : C | |
| MIL PRF 62547 : B | VALVE AND CYLINDER ASSEMBLIES, HALON 1301 |
| MIL A 87211 : NOTICE 1 | AIR DATA SYSTEMS REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD ENES, WRIGHT PATTERSON, AFB OH 45433 6503 |
| MIL-STD-1512 Base Document:1972 | ELECTROEXPLOSIVE SUBSYSTEMS, ELECTRICALLY INITIATED, DESIGN REQUIREMENTS AND TEST METHODS |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| MIL-I-38468 Revision A:1983 | INDICATOR, LIQUID OXYGEN QUANTITY GMU-59/A |
| A-A-59618 Base Document:2002 | Cleaner, Pressure, Hot-Water, Skid-Mounted |
| MIL P 24441/21 : 0 | PAINT, EPOXY-POLYAMIDE, HAZE GRAY, FORMULA 151, TYPE III |
| MIL T 81579 : 0 | TEST HARNESS, RADAR BEACON AN/APM-231A FOR RADAR BEACON AN/APN-154(V) |
| MIL-I-25120 Revision C:1993 | INDICATOR, INSTRUMENT LANDING, AIRPORT RUNWAY |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE |
| MIL-F-8378 Revision B:1975 | FREQUENCY METERS, AIRCRAFT 380 TO 420 HERTZ AND 350 TO 450 HERTZ |
| MIL-S-81340 Revision B:1979 | SIGNAL, UNDERWATER SOUND (SUS) MARK 84 AND MODS |
| AA-D-001923 Base Document:1975 | DESK ATTACHMENTS, L, RETURN PLATFORM, CONTEMPORARY STYLE |
| TT-E-491 Revision C:1977 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL AND WOOD FURNITURE) |
| MIL-F-411 Revision D:1990 | FASTENER, BELT, CLIPS, END, STRAP WITH HOOK AND KEEPERS SLIDE |
| MIL-A-25933 Revision B:1985 | ALTIMETER, PRESSURIZED COMPARTMENT, INTEGRALLY LIGHTED 0-50,000 FEET, 1-7/8 INCH DIAL |
| MIL-I-85112 Base Document:1978 | INDICATOR SET, VERTICAL SCALE |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| PPP-C-1337 Revision B:1976 | CONTAINERS, COMPOSITE (STEEL DRUM WITH POLYETHYLENE INSERT) |
| SAE AS 85352 : 2011 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE, REMOTE CONTROL, DIRECT READING |
| MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK |
| MIL-A-45559 Revision B:1967 | ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL TRACKED, 152 MM, M551 |
| MIL-B-43750 Revision H:1993 | BEEF WITH RICE, COOKED, DEHYDRATED |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| MIL-I-25130 Revision B:1974 | INDICATOR, PRESSURE, OIL, 0-300PSI, TYPE MO-1 |
| MIL-D-51188 Revision C:1977 | DISPERSER, RIOT CONTROL AGENT, HELICOPTER OR VEHICLE MOUNTED, M5 |
| MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
| MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
| MIL-S-29594 Base Document:1992 | Spectacles, Aviator\'s, Seven Wavelength Laser Eye Protective |
| MIL-A-26360 Revision B:1982 | AMPLIFIER, ELECTRONIC CONTROL ASU-3/A |
| MIL-B-23459 Revision D:1988 | BUOY, HOSE SUPPORT, INFLATABLE |
| MIL-B-4173 Revision B:1969 | BENCH, WORK, GENERAL PURPOSE |
| MIL-B-49041 Base Document:1974 | BATTERY, DRY BA-1579/U |
| AA-S-81 Revision B:1962 | SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION |
| MIL C 19759 : E | CLOTH, COATED, TWILL, NYLON (LOW COUNT) |
| MIL-H-1404 Revision D:1970 | HOLDERS, CARD-LABEL |
| MIL-C-43006 Revision G:1989 | CLOTH & STRIP, LAMINATED OR COATED, VINYL NYLON OR POLYESTER HIGH STRENGTH, FLEXIBLE. |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| MIL-C-18263 Revision F:1971 | COLOR, EXTERIOR, NAVAL AIRCRAFT, REQUIREMENTS FOR |
| MIL-I-38021 Revision A:1963 | INDICATOR, LIQUID OXYGEN QUANTITY GMU 39/A |
| MIL-G-17594 Revision B:1963 | GROMMET, PLASTIC, UNICELLULAR, HIGH DENSITY |
| MIL-I-27552 Revision C:1995 | INDICATOR, TEMPERATURE, THERMOCOUPLE EHU-15A/A, POTENTIOMETER TYPE, WHITE LIGHTED |
| MIL-DTL-26202 Revision E:2006 | LIGHT, MARKER, AIRPORT, SEMIFLUSH, GENERAL SPECIFICATION FOR |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| MIL D 5551 : B | DOPE, CELLULOSE ACETATE BUTYRATE, PIGMENTED, GLOSS |
| MIL-S-87238 Base Document:1985 | SURVIVAL AND FLOTATION SYSTEM, AIRBORNE |
| MIL-STD-1576 Base Document:1984 | ELECTROEXPLOSIVE SUBSYSTEM SAFETY REQUIREMENTS AND TEST METHODS FOR SPACE SYSTEMS |
| 13/30285940 DC : 0 | BS EN 3773-006 - AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENTS 1 A TO 25 A - PART 006: 6,35 BLADE TERMINAL PRODUCT STANDARD |
| MIL-PRF-81904 Revision C:2011 | COATING COMPOUND, THERMAL-INSULATION |
| MIL-D-81357 Revision A:1970 | Display Group, Tactical Data AN/ASA-70 |
| MIL-S-85018 Revision A:1978 | Second Order Attitude Reference System (Soars) AN/ASN-116 |
| MIL K 23714 : C | KIT, SAMPLING, FOR AVIATION FUELS, REUSABLE |
| MIL-T-43702 Revision A:1975 | TIE, RIBBON, TWIST |
| MIL-I-25482 Revision D:1993 | INDICATOR, ENGINE TESTING |
| NASA KSC SO S 9 : 1993 | RETEST AND REFURBISHMENT OF COMPRESSED GAS TRAILERS AND MOVABLE STORAGE UNITS, STANDARD FOR |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| MIL-C-24937 Revision A:1993 | CAP, COMBINATION, MAN'S (CG) |
| MIL-PRF-62495 Revision B:1997 | POWER UNIT, HYDRAULIC |
| MIL-I-7171 Revision D:1993 | INSULATION BLANKET, THERMAL ACOUSTICAL |
| MIL-G-49460 Base Document:1986 | GENERATOR, DIRECT CURRENT: G-76B/G |
| MIL-G-49274 Base Document:1984 | Generator, Digital Data SG-1139 ( )/G (No S/S Document) |
| MIL-H-58108 Base Document:1986 | HEADSET-MICROPHONE KIT MK-2193/AIC |
| MIL-A-85505 Base Document:1983 | ALTIMETER, STANDBY, TYPES 1 AND 2 |
| MIL-I-7112 Revision B:1985 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, CYLINDER HEAD 0 DEGREES C TO 300 DEGREES C |
| MIL-C-52707 Revision D:1983 | COVER, FOXHOLE OVERHEAD PROTECTION |
| MIL-B-43444 Revision A:1975 | BAG, PLASTIC, CONTAMINATED WASTE DISPOSAL |
| MIL-E-83304 Revision B:1975 | EXTINGUISHER UNIT, FIRE BROMOCHLORODIFLUOROMETHANE, FEU-2/S32P, 40 GALLON CAPACITY, TRUCK MOUNTING |
| MIL-L-11647 Revision E:1991 | LEVER, BALK DEPRESSING, CLAW BAR TYPE |
| MIL-I-27672 Revision B:1987 | INDICATOR, POSITION ALU-4/1, HORIZONTAL STABILIZER |
| KKK-S-2777 Base Document:1985 | SNOWPLOWS, TRUCK MOUNTED, DISPLACEMENT TYPE, 36,000 GVWR, 4 BY 4 |
| MIL-A-27670 Revision D:1994 | AMPLIFIER-INDICATOR GROUP, INDICATED AIRSPEED A/A24G-10 |
| MIL S 15291 : E | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| KKK-F-2115 Base Document:1985 | FIRE TRUCK (PUMPER), DIESEL ENGINE, 4X2 OR 4X4, 11,000 TO 20,000 POUNDS GVW |
| DOD-E-699 Revision D:1978 | ENAMEL, EXTERIOR, DECK, GRAY (FORMULA NO.20) (METRIC) |
| MIL-A-83212 Revision A:1976 | ALTIMETER, PRESSURE AAU-27/A |
| MIL-A-85672 Base Document:1987 | AMPLIFIER, RADIO FREQUENCY AM-7177A/ARC |
| MIL-G-26988 Revision C:1971 | GAGE, LIQUID QUANTITY, CAPACITOR TYPE TRANSISTORIZED, GENERAL SPECIFICATION FOR |
| MIL-DTL-32117 Revision A:2004 | HELMET COVER, REVERSIBLE, MARPAT[TM] WOODLAND AND DESERT PATTERN CAMOUFLAGE, MARINE CORPS |
| MIL-A-81605 Revision D:1984 | ALTIMETER SET, ELECTRONIC AN/APN-194(V) |
| MIL-H-85037 Base Document:1976 | HOOD, WINTER, FLYER'S |
| DOD-E-698 Revision C:1978 | ENAMEL, ALKYD, DECK, BLACK (FORMULA NO. 24) |
| 10/30230921 DC : 0 | BS EN 3774-004 - AEROSPACE SERIES - CIRCUIT BREAKER, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 1 A TO 25 A - PART 004: WITHOUT SIGNAL CONTACT - PRODUCT STANDARD |
| MIL-A-3248 Revision B:1970 | AMYL NITRITE (INHALANTS) |
| P-S-1792 Base Document:1973 | SOAP, LAUNDRY (NEUTRAL AND BUILT) |
| AASHTO R 31 : 2009 : R2014 | PRACTICE FOR EVALUATION OF PROTECTIVE COATING SYSTEMS FOR STRUCTURAL STEEL |
| AA-D-001918 Base Document:1975 | DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE |
| MIL-I-83245 Revision A:1994 | INDICATOR SET, OIL PRESSURE A/A24J-17 |
| MIL-I-83262 Revision B:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-A-19939 Revision A:1966 | AMPLIFIER, TWO CHANNEL, INTEGRAL, S-2 COMPASS |
| MIL-I-27680 Revision C:1973 | INDICATOR, ATTITUDE, ARU-12/A, REMOTE |
| MIL-C-82407 Base Document:1968 | COATING, EPOXY, FOR STEEL STRUCTURES |
| MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
| SAE AS22145A | ACCELEROMETER GROUP, COUNTING (MS25447 AND MS25448) |
| MIL-P-6884 Revision F:1973 | PAINT, CAMOUFLAGE OR TEMPORARY IDENTIFICATION, SOLVENT REMOVABLE |
| MIL-C-42066 Revision A:2000 | CARRIER, LITTER, WHEELED |
| MIL-T-49388 Revision A:1983 | TRAY ASSEMBLY, BATTERY CHARGING MX-10154 |
| MIL-P-11087 Revision G:1994 | PIPE, STEEL: GROOVED OR PLAIN ENDS |
| MIL T 52849 : C | TEST KIT, PETROLEUM; AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL C 23216 : C | CONTACTS, ELECTRIC CONNECTOR, GENERAL SPECIFICATION FOR |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER'S AIR (SDASS) |
| MIL I 27189 : D | INDICATOR, PRESSURE OIL |
| MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
| MIL-R-46509 Revision A:1982 | ROCKET MOTOR, XM30, METAL PARTS FOR |
| MIL W 16878 : F | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-I-27673 Revision C:1993 | INDICATOR, TRUE AIRSPEED AVU-15/A |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL-I-5914 Revision E:1993 | INDICATOR, RATE OF FLOW, FUEL TYPE EFU 24/A AND TYPE EFU 25/A |
| TT-P-2760 Revision A:1994 | PRIMER COATING; POLYURETHANE, ELASTOMERIC |
| TT-E-529 Revision G:1988 | ENAMEL, ALKYD, SEMIGLOSS, LOW VOC CONTENT |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| MIL-T-52340 Revision B:1991 | TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| L-P-380 Revision C:1973 | PLASTIC MOLDING MATERIAL METHACRYLATE |
| MIL V 24509 : A | VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE |
| SAE AS 6055 : 2006 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
| MIL-I-27623 Revision C:1972 | INDICATOR, ATTITUDE, REMOTE STANDBY, 2 INCH |
| MIL-T-85678 Base Document:1974 | TRANSPONDER, RADAR TRACKING |
| MIL-B-11844 Revision D:1976 | BRIDGE, FIXED: STEEL, PORTABLE PANEL, BAILEY TYPE M2 (WIDENED ROADWAY) |
| 10/30230910 DC : 0 | BS EN 2794-004 - AEROSPACE SERIES - CIRCUIT BREAKER, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 20 A TO 50 A - PART 004: WITHOUT SIGNAL CONTACT - PRODUCT STANDARD |
| MIL-I-25950 Revision B:1967 | INDICATOR, PRESSURE, OIL, 0-100 PSI |
| MIL-I-7087 Revision A:1968 | INDICATOR, PRESSURE OIL, 0-200 PSI |
| MIL-B-27036 Revision A:1962 | BOMB, LOADING PRACTICE BDU-9/E |
| DOD-P-15146 Revision B:1977 | PAINT, EXTERIOR, DULL BLACK (FORMULA NO. 104) (METRIC) |
| MIL-I-7071 Revision B:1972 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-I-83117 Revision B:1975 | INDICATOR, ANGLE OF ATTACK |
| MIL-G-29114 Revision A:1977 | GLOVES, CLOTH, VINYL COATED, MEN'S AND WOMEN'S |
| MIL-C-10387 Revision J:1992 | COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE |
| TT-I-1795 Revision A:1973 | INK, MARKING, STENCIL, OPAQUE (POROUS AND NON-POROUS SURFACES) |
| MIL P 47115 : A | PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
| MIL-C-6235 Revision D:1970 | COMPASS, MAGNETIC, UNMOUNTED POCKET SURVIVAL |
| MIL-B-52598 Revision B:1969 | BAG, SAND: ACRYLIC |
| MIL-S-43766 Revision A:1988 | SUPPORT ASSEMBLY, ARCH, INFLATABLE SHELTER SECTION (MUST) |
| MIL-C-43135 Revision J:1993 | CHICKEN AND CHICKEN PRODUCTS, COOKED, DEHYDRATED |
| TT-P-95 Revision C:1975 | PAINT, RUBBER, FOR SWIMMING POOLS AND OTHER CONCRETE AND MASONRY SURFACES |
| MIL-T-44047 Revision E:1991 | TROUSERS, CAMOUFLAGE PATTERN, COMBAT |
| MIL H 53027 : A | HOSE ASSEMBLY, RUBBER; LIGHTWEIGHT, COLLAPSIBLE, 6 INCH; FOR DRINKING (POTABLE) WATER |
| MIL T 53068 : 0 | TANKS, LIGHTWEIGHT, COLLAPSIBLE, PILLOW, 160 GALLON (NOMINAL), DRINKING WATER |
| MIL-V-18318 Revision B:1966 | VALVE, PRESSURE REGULATING, OXYGEN SYSTEM |
| MIL-PRF-83041 Revision C:2000 | FILTER-SEPARATOR, LIQUID FUEL SKID MOUNTED, 600 GALLONS PER MINUTE |
| MIL-T-26963 Revision D:1992 | TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE TYPE MP-1 |
| MIL-C-43086 Revision C:1983 | CLOTH,COATED,NYLON,VINYL COATED (FOR AIR SUPPORTED SHELTERS) |
| MIL-C-87263 Base Document:1992 | CLOTH, KNIT, JERSEY, POLYBENZIMIDAZOLE BLEND |
| MIL-F-40048 Revision C:1984 | FLAGSTAFFS AND INSIGNIA, FLAGSTAFF HEADS, GENERAL SPECIFICATION FOR |
| MIL-T-14643 Revision C:1994 | TAG, IDENTIFICATION, INDIVIDUAL, PLASTIC, AIR FORCE |
| MIL-C-26237 Revision C:1983 | CRADLE, AIRCRAFT-MISSILE COMPONENTS MMU-1/E |
| MIL L 12606 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02 |
| MIL-I-25941 Revision D:1986 | INDICATOR, TURN AND SLIP, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-B-55252 Revision B:1992 | BATTERIES, NON-RECHARGEABLE, MAGNESIUM |
| MIL-C-87970 Base Document:1982 | CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129 |
| MIL-DTL-21097-11 Revision J:2005 | Connectors, Electrical, Printed Wiring Board Keys, Polarizing |
| MIL-G-5678 Revision C:1964 | GAGE PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE |
| TT-P-59 Revision E:1975 | PAINT, READY, MIXED, INTERNATIONAL ORANGE (NOT FOR RESIDENTIAL USE) |
| MIL-PRF-22684 Revision F:2006 | RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-I-7084 Revision A:1988 | INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI |
| MIL-I-27848 Revision B:1994 | INDICATOR, HORIZONTAL SITUATION AQU-4/A |
| MIL-L-85314 Revision A:1983 | LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR |
| TT-C-555 Revision B:1973 | COATING, TEXTURED (FOR INTERIOR AND EXTERIOR MASONRY SURFACES) |
| MIL-A-81423 Base Document:1966 | ATTITUDE HEADING REFERENCE SYSTEM AN/ASN-73 |
| SAE ARP 4898 : 2005 | STANDS, SHIPPING AND STORAGE, AIRCRAFT ENGINES, REUSABLE |
| MIL P 62071 : B | POWER SUPPLY, HIGH VOLTAGE, SOLID STATE, 24 VOLTS, DIRECT CURRENT |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-L-6273 Revision D:1983 | LIGHT, NAVIGATIONAL, BEACON, OBSTACLE OR CODE, TYPE G 1 |
| AA-T-2753 Base Document:1991 | TABLE, FOLDING, STEEL TUBE (ADVANCE BASE) |
| TT-C-535 Revision B:1972 | COATING EPOXY, TWO COMPONENT, FOR INTERIOR USE ON METAL, WOOD, WALLBOARD, PAINTED SURFACES CONCRETE AND MASONRY |
| MIL-B-44135 Revision B:1993 | BEVERAGE BASE, POWDER, ORANGE, FORTIFIED (OPERATIONAL RATION COMPONENT) |
| MIL-A-27671 Revision B:1965 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-11 |
| MIL A 4946 : B | ANTENNA ASSEMBLY AT-197()/GR |
| MIL-B-28536 Revision C:1989 | BUILDING, PREFABRICATED, READY CUT, METAL, RIGID FRAME, 40 X 100 FEET |
| MIL-J-43924 Revision E:1991 | JACKET, COLD WEATHER, (HIGH TEMPERATURE RESISTANT] |
| MIL-R-24661 Base Document:1985 | RING BUOY, LIFESAVING, AUTO INFLATABLE |
| MIL-B-21902 Revision A:1963 | |
| MIL-G-43196 Revision C:1987 | GLOVES, ROCKET FUEL HANDLERS |
| MIL-I-38258 Base Document:1965 | INDICATOR, ATTITUDE ARU 18/A DIRECTOR |
| MIL-F-35081 Revision E:1984 | FAT, HYDROGENATED, VEGETABLE |
| MIL-C-87975 Base Document:1985 | CLOCK, AIRCRAFT, MECHANICAL ABU-32/A |
| GG-W-113 Revision A:1967 | WATCH, WRIST |
| MIL-C-47127 Revision A:1983 | CLOTH, POLYESTER FABRIC, CHLOROSULFONATED POLYETHYLENE COATED, FLAME RESISTANT |
| MIL-T-10652 Revision A:1967 | TUBING, PLASTIC GLASS FABRIC BASE LOW PRESSURE LAMINATED |
| MIL-C-10015 Revision D:1982 | CHEST, TOOL KIT, EMPTY |
| MIL-C-87178 Base Document:1984 | CLOTH, COATED, NYLON, POLYURETHANE COATED |
| TT-P-32 Revision B:1978 | PAINT, BLACKBOARD COATING |
| MIL-B-43273 Revision B:1976 | BOX, FIBERBOARD, FOR PACKAGING AND PACKING PERSONNEL PARACHUTES AND CANOPY ASSEMBLIES |
| MIL-C-13489 Revision D:1985 | COVER AND END CURTAINS; CARGO BODY (FOR MILITARY VEHICLES) |
| MIL-E-24715 Base Document:1989 | EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211) |
| MIL S 21604 : D | SWITCHES, ROTARY, MULTIPOLE AND SELECTOR - GENERAL SPECIFICATION FOR |
| MIL-I-83262-3 Base Document:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE, EHU-43/A |
| MIL-I-27619 Revision G:1974 | INDICATORS, ATTITUDE DIRECTOR |
| MIL-C-23157 Revision D:1979 | CLIPBOARD, PILOTS, MXU-163/P AND MARK 2A |
| MIL-T-85549 Base Document:1982 | Test Program Set (TPS) - Operational Test Program Sets (OTPS) For F/A-18 Units Under Test (UUT), General Specification For |
| MIL P 9503 : B | PAINT, RUBBER, RIGID AND AIR SUPPORTED RADOME |
| MIL-C-5414 Revision G:1993 | COMPUTER, AIR NAVIGATION DEAD RECKONING TYPE MB 4A AND TYPE CPU 26A/P |
| MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
| MIL-B-4792 Revision E:1994 | BUMPER, RUBBER, DUPLEX ROUND |
| MIL H 87961 : NOTICE 2 | HOSE AND HOSE ASSEMBLIES, AIR DUCT, AIR BREATHING, OXYGEN SYSTEM GENERAL SPECIFICATION FOR |
| MIL-H-51290 Revision B:1991 | HOOD, AIRCRAFT CHEMICAL BIOLOGICAL MASK, ABC-M7 |
| MIL P 24441/27 : 0 | PAINT EPOXY-POLYAMIDE, N0.50 GRAY, FORMULA 157, TYPE III |
| MIL-T-58082 Revision A:1974 | TESTER, PYROMETER & THERMOCOUPLE, FIELD, TYPE N-3A |
| MIL-T-5583 Revision C:1987 | Transmitter, Position, 28 Volts DC |
| MIL W 6496 : B NOTICE 1 | WINCH, DRUM, ENGINE OF TURRET HOIST, TYPE A-1 |
| MIL-F-10336 Revision E:1977 | FIBER SHEET, VULCANIZED |
| MIL-L-10287 Revision B:1976 | LACQUER, CELLULOSE NITRATE FOR IDENTIFICATION OF SMALL ARMS AMMUNITION |
| MIL-C-38207 Revision A:1965 | CLOCK, AIRCRAFT, MECHANICAL ABU 11/A |
| MIL-S-17980 Revision D:1973 | SEA MARKER PACKET, INFLATABLE SURVIVAL EQUIPMENT |
| MIL G 21480 : A | GENERATOR SYSTEM, 400 HERTZ ALTERNATING CURRENT, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL I 27851 : B | INDICATOR, INDICATED AIRSPEED AVU-17/A |
| MIL-T-25307 Revision D:1985 | TRANSMITTER, PRESSURE, HYDRAULIC, TYPE MJ-1 |
| MIL-C-38418 Revision E:1981 | Control Assembly, Gyroscope, Attitude A/A24G-39 |
| MIL A 25949 : E (2) | ACCELEROMETER, AIRCRAFT RANGE -5 TO PLUS 1OG UNITS, INTEGRALLY LIGHTED |
| MIL-I-7075 Revision A:1965 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION -50 DEGREES TO +50 DEGREES C 2 INCH SIZE |
| GGG-B-191 Revision C:1992 | BENDER, TUBE, HAND, (PORTABLE) |
| MIL-C-12999 Revision B:1967 | CHEST, HYMN BOOK |
| MIL-P-6906 Revision B:1969 | PLATE, IDENTIFICATION AIRCRAFT |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| MIL-C-17415 Revision F:1989 | CLOTH, COATED, AND WEBBING, INFLATABLE BOAT AND MISCELLANEOUS USE |
| MIL-L-11075 Revision G:1988 | LOOPS, STRAP FASTENER |
| MIL-C-8779 Revision E:1988 | COLOR, INTERIOR, AIRCRAFT, REQUIREMENTS FOR |
| MIL-I-5416 Revision B:1962 | INDICATOR, INDICATED AIRSPEED 10-150 KNOTS |
| AA-S-271 Revision D:1967 | SHELVING, STORAGE AND DISPLAY, STEEL, INTERCHANGEABLE, NUT AND BOLT TYPE |
| MIL-PRF-71168 Revision A:2000 | CARTRIDGE, 7.62MM, XM974 TRACER, SHORT RANGE, TRAINING AMMUNITION |
| MIL-H-11190 Revision D:1970 | HEADSET, ELECTRICAL AND HEADSET MICROPHONES |
| MIL-F-51068 Revision F:1986 | FILTERS, PARTICULATE (HIGH-EFFICIENCY FIRE RESISTANT) |
| MIL M 10304 : E | METER, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED GENERAL SPECIFICATION FOR |
| MIL-B-25337 Revision B:1970 | BOTTLE ASSEMBLIES, VACUUM, AIRCRAFT |
| MIL M 43994 : C | MARKER, IDENTIFICATION, FIRE, CHEMICAL HAZARD, AND RESTRICTED AREA, REFLECTIVE |
| MIL-C-43391 Revision A:1973 | CONTAINER ASSEMBLY, SAMPLE AND SPECIMEN SHIPPING, BOX TYPE FOR AVIATION FUELS AND LUBRICATING OIL |
| MIL-B-55290 Base Document:1964 | BATTERY, WATER ACTIVATED BA-380 /AMQ-9 |
| MIL G 10849 : F | GLOVE SHELLS, ELECTRICAL WORKER'S |
| MIL-B-1861 Revision A:1964 | BED, FOLDING, STEEL |
| MIL-C-11071 Revision D:1983 | CLEANING MACHINE, FUEL CAN, DRUM |
| MIL-I-27667 Revision C:1990 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, EHU-16/A MULTIFUNCTION -70 DEGREES TO +150 DEGREES C |
| MIL-P-85511 Revision A:1987 | PANEL ASSEMBLY, TARGET, BANNER, AERIAL TDU-32 SERIES |
| ASTM F 3021 : 2017 : REDLINE | Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments |
| MIL-I-23524 Revision A:1986 | INDICATOR, ATTITUDE DIRECTOR, REMOTE, ID 1329A (V) |
| MIL-R-83404 Base Document:1973 | ROCKET MOTOR MANUFACTURING ROCKET MOTOR SR110-AD-1 |
| MIL-DTL-29469 Revision A:1998 | CHAPLAIN'S KIT - COMBAT |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| MIL A 49314 : 0 | ANTENNAS, UHF SATCOM, PORTABLE, FOLDABLE (LIGHT WEIGHT, MEDIUM WEIGHT & HEAVY DUTY), GENERAL SPECIFICATION FOR |
| MIL-L-24778 Base Document:1992 | LIFE PRESERVER, UTILITY, AUTO INFLATABLE, MK 5, MOD 0 |
| MIL-A-53099 Base Document:1990 | ARCTIC FORWARD AREA REFUELLING EQUIPMENT (AFARE) |
| MIL-F-38762 Base Document:1966 | FLUORESCENT PENETRANT INSPECTION UNITS |
| MIL-V-85830 Base Document:1989 | VENTILATOR, TACTICAL, HELICOPTER AIRCREWMEN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL C 25666 : E (1) | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| DOD-C-85050 Base Document:1982 | CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| MIL-I-23832 Revision A:1980 | Indicator, Tachometer, Triple Pointer, Helicopter |
| AASHTO M 249 : 2012 | SPECIFICATION FOR WHITE AND YELLOW REFLECTIVE THERMOPLASTIC STRIPING MATERIAL (SOLID FORM) |
| MIL-I-81049 Revision A:1972 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION |
| MIL-M-46849 Base Document:1971 | MICROFILMING OF ENGINEERING AND RELATED DOCUMENTS, 16MM REQUIREMENTS FOR |
| MIL-T-63531 Base Document:1988 | TURRET SUBSYSTEM, UNIVERSAL (UTS) FOR ARMAMENT SUBSYSTEM, HELICOPTER, 20MM, M97E1, AND M97E2 UNIVERSAL BORESIGHT KIT FOR |
| MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL I 27190 : B | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-I-7802 Revision A:1967 | INDICATOR, MS 28088, TURN AND SLIP [THREE PHASE] |
| MIL-I-26299 Revision G:1990 | INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| TT-P-1046 Revision A:1975 | PRIMER COATING, ZINC DUST, CHLORINATED RUBBER, (FOR STEEL AND GALVANIZED SURFACES) |
| MIL K 20277 : H | KNIFE, COMBAT AND SHEATH |
| MS25223 Revision H:2005 | GUARD, SWITCH, 3 POSITION |
| MIL-H-81324 Base Document:1966 | HONING MACHINE, DRY PORTABLE |
| MIL-I-51484 Base Document:1982 | INSECTICIDE, D PHENOTHRIN (AEROSOL) |
| MIL-C-14635 Revision B:1990 | COVER, PERSONNEL IDENTIFICATION TAG |
| GG-G-650 Base Document:1959 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| L-T-776 Revision A:1966 | TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN) |
| MIL-C-52933 Base Document:1977 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR LIGHTWEIGHT, SYNTHETIC SNOW |
| MIL I 25860 : A | INDICATOR, RATE OF FLOW EFU-1/A, 0-6,000-24,000 PPH, 2-INCH, INTEGRALLY LIGHTED |
| MIL-I-7906 Revision A:1961 | INDICATOR, GYRO HORIZON, MANUALLY CAGED, ELECTRIC, TYPE MB 1 |
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| MIL-B-36964 Revision B:1973 | BLANKET, COMBAT, CASUALTY LIGHTWEIGHT, WATERPROOF, ALUMINIZED PLASTIC |
| MIL-C-43460 Revision B:1979 | COATING, LUSTERLESS, FOR HELMETS AND LINERS' |
| MIL-DTL-85855 Revision A:1999 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, BIOLOGICAL, RADIOLOGICAL (CBR), A/P22P-9 (V) |
| MIL D 9555 : A NOTICE 1 | |
| MIL-V-85603 Base Document:1989 | VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR |
| MIL-DTL-27190 Revision C:2006 | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL I 83361 : (4) | INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI |
| MIL F 18953 : B | FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD |
| MIL-STD-1293 Base Document:1979 | ELECTRO-MECHANICAL COMMAND INSTRUMENT SYSTEM FOR ROTARY WING AIRCRAFT |
| MIL M 23888 : NOTICE 1 | MONITOR, RADIO FREQUENCY ID AND 9O2A/AR |
| MIL-L-24560-25 Base Document:1990 | LIGHT, TASK AND SHIELD ASSEMBLY FOR USE WITH SYMBOL 114.1 AND 115.1 PLASTIC LIGHT FIXTURES |
| MIL E 25670 : A NOTICE 1 | GENERAL SPECIFICATION FOR EARPHONE ELEMENTS |
| MIL-G-46003 Revision A:1976 | GREASE, RIFLE |
| MIL-DTL-6856 Revision D:2006 | INDICATOR, PRESSURE, SYNCHRO, 1-1/2 INCH |
| MIL-PRF-32076 Base Document:2000 | UNITIZATION OF AMMUNITION |
| MIL-P-16406 Revision A:1974 | PAINT, BLACK, HIGH GLOSS, QUICK DRYING |
| MIL-DTL-14631 Revision C:1997 | PLATE, AUTOMOBILE, INDIVIDUAL - GENERAL SPECIFICATION FOR |
| MIL-B-43927 Base Document:1975 | BRIGHTENER, OPTICAL, LAUNDRY |
| TT-P-001984 Base Document:1975 | PRIMER COATING, LATEX BASE, EXTERIOR, UNDERCOAT FOR WOOD, WHITE AND TINTS |
| KKK-A-2809 Base Document:1986 | AUGER, EARTH, TRUCK MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-DTL-25666 Revision F:1995 | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| MIL P 24441/31 : 1991 | PAINT, EPOXY-POLYAMIDE, WHITE, FORMULA 152, TYPE IV |
| MIL-L-5567 Revision F:1983 | LIFE RAFTS, INFLATABLE 4 AND 7 MAN FOR AIRCRAFT USE |
| MIL S 81018/2 : D NOTICE 3 | SURVIVAL KIT CONTAINER, AIRCRAFT SEAT, WITH OXYGEN, RSSK-8D |
| MIL-PRF-87937 Revision D:2001 | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL P 14458 : A NOTICE 1 | PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT |
| A-A-52217 Revision C:2012 | TRAY, MESS, COMPARTMENTED |
| L-T-99 Revision C:1975 | TAPE, PRESSURE-SENSITIVE ADHESIVE, IDENTIFICATION |
| MIL F 45144 : D | FUSE, BLASTING, TIME, M700, & FUSE, BLASTING, TIME, INERT, LOADING, ASSEMBLING AND PACKING |
| DOD-PRF-24648 Base Document:1985 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| ASTM E 2518 : 2011 | Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer) |
| MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-13488 Revision C:1973 | AIR CLEANER, ENGINE: HEAVY-DUTY, OIL-BATH TYPE (FOR INTERNAL-COMBUSTION ENGINES) |
| MIL-I-26380 Revision B:1964 | INDICATOR, LIQUID OXYGEN QUANTITY GMU-5/A |
| TT-E-001384 Base Document:1979 | ENAMEL, GLOSS, SYNTHETIC (FOR METAL EQUIPMENT) |
| MIL-C-23760 Revision D:1983 | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, FOR PACKAGING OF WEAPONS SYSTEMS AND COMPONENTS: APPLICATION OF |
| FAA AC 150/5345-46 : 2009 | SPECIFICATION FOR RUNWAY AND TAXIWAY LIGHT FIXTURES |
| MIL T 49318 : 1991-11-21 | TEST SET, ELECTRONIC SYSTEMS |
| MIL-G-8170 Revision D:1987 | GAGE, OIL PRESSURE, DIRECT INDICATING, SINGLE CLAMP MOUNTED 0 -200 PSI 320 DEGREE SCALE 2 INCH SIZE, TYPE AGU 12/A AND AGU 13/A |
| MIL L 23699 : E | LUBRICATING OIL, AIRCRAFT TURBINE ENGINES, SYNTHETIC BASE |
| MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-P-24380 Revision B:1989 | PAINT, ANCHOR, CHAIN, SOLVENT TYPE, GLOSS BLACK |
| BS EN 3773-006:2017 | Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A 6,3 mm blade terminal. Product standard |
| MIL-L-15581 Revision K:1986 | LIFE PRESERVERS, CO[2] INFLATABLE, POUCH TYPE |
| TT-E-1593 Revision B:1974 | ENAMEL, SILICONE ALKYD COPOLYMER, GLOSS (FOR EXTERIOR AND INTERIOR USE) |
| MIL R 3390 : F | RINGS, DEE |
| MIL-DTL-18045 Revision G:1997 | LIFE PRESERVERS, VEST, INHERENTLY BUOYANT |
| TT-P-30 Revision E:1977 | PAINT, ALKYD, ODORLESS, INTERIOR, FLAT WHITE AND TINTS |
| MIL-A-27391 Revision B:1963 | ALTIMETER, PRESSURE AAU-2A |
| MIL-P-8793 Revision A:1961 | PAINT, [GLOSS AND NONSPECULAR] FOR USE ON ELASTOMERIC PIGMENTED FILM [ASG] |
| MIL-O-83804 Revision A:1980 | OSCILLOSCOPE (AN/USM-426)V, 250 MEGAHERTZ (MHZ) GENERAL PURPOSE |
| PREN 4839-003 : DRAFT 2016 | AEROSPACE SERIES - ARC FAULT CIRCUIT BREAKERS, THREE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 3 A TO 25 A, 115/200 V A.C. 400 HZ CONSTANT FREQUENCY - PART 003: WITHOUT AUXILIARY CONTACTS - PRODUCT STANDARD |
| MIL-P-24441-7 Revision C:1991 | PAINT, EPOXY POLYAMIDE, TOPCOAT, RED, FORMULA 156, TYPE 1 |
| MIL-DTL-24416 Revision C:2006 | Extinguishing System, Fire, Fixed, Wet Chemical |
| FAA AC 150/5345-55 : 2007 | SPECIFICATION FOR L-893, LIGHTED VISUAL AID TO INDICATE TEMPORARY RUNWAY CLOSURE |
| MIL-S-17615 Revision E:1980 | STRAP, CHIN (NAVY AND COAST GUARD) |
| MIL D 6054 : F | DRUM, METAL - SHIPPING AND STORAGE |
| MIL-B-55679 Base Document:1969 | BATTERY, DRY (SPECIAL PURPOSE) |
| PREN 2995-005 : 200P3 | AEROSPACE SERIES - CIRCUIT BREAKERS, SINGLE-POLE, TEMPERATURE COMPENSATED, RATED CURRENT 1 A TO 25 A - PART 005: WITH POLARIZED SIGNAL CONTACT - PRODUCT STANDARD |
| SAE AS5272E | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION |
| SAE AS 38404 : 2013 | COUPLINGS, HOSE, REATTACHABLE SCREW-ON |
| SAE AS23899A | AURAL PROTECTOR, SOUND |
| I.S. EN 4612-002:2011 | AEROSPACE SERIES - CABLES, ELECTRICAL, FOR GENERAL PURPOSE, SINGLE AND MULTICORE ASSEMBLY - XLETFE FAMILY - JACKETED OR SCREENED AND JACKETED - PART 002: GENERAL |
| ASTM E 1161 : 2009 | Standard Practice for Radiologic Examination of Semiconductors and Electronic Components |
| SAE AMS3801D | CLOTH, PARACHUTE - META-ARAMID, LOW MODULUS |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| SAE AMS3167B | SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
| API 17H : 2013 | REMOTELY OPERATED TOOLS AND INTERFACES ON SUBSEA PRODUCTION SYSTEMS |
| DIN EN ISO 10555-5:2013-11 | INTRAVASCULAR CATHETERS - STERILE AND SINGLE-USE CATHETERS - PART 5: OVER-NEEDLE PERIPHERAL CATHETERS (ISO 10555-5:2013) |
| BS EN 2996-004:2006 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 1 A to 25 A With signal contact. Product standard |
| 11/30250206 DC : 0 | BS EN 6140 - AEROSPACE SERIES - PLUG, PROTECTIVE, NON METALLIC FOR FITTING ENDS <= 3000 PSI HYDRAULIC SYSTEMS |
| BS EN 2665-004:2013 | Aerospace series. Circuit breakers, three-pole, temperature compensated, rated current 20 A to 50 A UNC thread terminals. Product standard |
| BS EN ISO 8835-4:2009 | Inhalational anaesthesia systems Anaesthetic vapour delivery devices |
| BS EN 1280-1:1997 | Agent specific filling systems for anaesthetic vaporizers Rectangular keyed filling systems |
| ASME B40.200:2008(R2013) | Thermometers, Direct Reading and Remote Reading <br> |
| ASME B40.200 : 2008 | THERMOMETERS, DIRECT READING AND REMOTE READING |
| ASTM D 1729 : 2016 : REDLINE | Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.