ETR 344 : 20001
Current
The latest, up-to-date edition.
TERMINAL EQUIPMENT (TE) - THE TECHNICAL FEASIBILITY OF A HARMONIZED PLUG AND SOCKET STANDARD
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
1.1 General
1.2 Background
2 References
3 Definitions and abbreviations
3.1 Definitions
3.2 Abbreviations
4 Survey of present arrangements
4.1 "2-wire" installation
4.2 "3-wire" installation
4.3 "Exclusive" installation
4.4 Other installation systems
5 Objectives of a future system
6 Description of a possible future system
6.1 The master unit
6.2 The Slave socket
6.3 Installation wiring
7 Management of transition (present to future)
8 The ISDN plug and socket
9 Benefits and impacts
10 Recommendations to the European Commission
11 Conclusion
Annex A: A copy of the annex to the study and
investigation mandate BC-T-033-SI
Annex B: Present national arrangements
B.1 Network termination point for the PSTN
B.2 Connection plugs
B.3 Connection circuits
Annex C: National identified characteristics
C.1 Introduction
C.2 Network voltage maximum ratings
C.3 Extreme of current flowing through line
C.4 Contact resistance for mated connectors
C.5 Insulation parameters
C.6 Electrical behaviour under surges
C.7 Climatic and physical environment
C.8 Chemical compliance
C.9 Mechanical characteristics and applied strains
C.10 Faults identification and life expectancy
Annex D: Example of an Outline Specification for a Euro Plug/Socket
D.1 General characteristics
D.2 Mechanical properties
D.3 Electrical properties
D.4 Safety
D.5 Intellectual Property Rights (IPR)
History
Ascertains whether it is technically feasible to produce a standard for a harmonized European plug and socket for use in the analogue Public Switched Telephone Network (PSTN).
| Committee |
ATA
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
European Telecommunications Standards Institute
|
| Status |
Current
|
| EG 201 188 : 1.2.1 | PUBLIC SWITCHED TELEPHONE NETWORK (PSTN) - NETWORK TERMINATION POINT (NTP) ANALOGUE INTERFACE - SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS AT A 2-WIRE ANALOGUE PRESENTED NTP FOR SHORT TO MEDIUM LENGTH LOOP APPLICATIONS |
| TS 102 971 : 1.1.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS OF A 2-WIRE ANALOGUE INTERFACE FOR SHORT LINE INTERFACE |
| TS 101 909-18 : 1.3.1 | DIGITAL BROADBAND CABLE ACCESS TO THE PUBLIC TELECOMMUNICATIONS NETWORK; IP MULTIMEDIA TIME CRITICAL SERVICES; PART 18: EMBEDDED MEDIA TERMINAL ADAPTER (E-MTA) OFFERING AN INTERFACE TO ANALOGUE TERMINALS AND CABLE MODEM |
| ES 202 971 : 1.2.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS OF A 2-WIRE ANALOGUE INTERFACE FOR SHORT LINE INTERFACE |
| ES 201 970 : 1.1.1 | ACCESS AND TERMINALS (AT); PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); HARMONIZED SPECIFICATION OF PHYSICAL AND ELECTRICAL CHARACTERISTICS AT A 2-WIRE ANALOGUE PRESENTED NETWORK TERMINATION POINT (NTP) |
| IEC 60068-2-5:2010 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| IEC 60068-2-60:2015 RLV | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| EN 60950:2000/corrigendum:2002 | SAFETY OF INFORMATION TECHNOLOGY EQUIPMENT |
| IEC 60068-2-11:1981 | Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist |
| ETS 300 200012 : 20001 | INTEGRATED SERVICES DIGITAL NETWORK (ISDN) - BASIC USER-NETWORK INTERFACE - LAYER 1 SPECIFICATION AND TEST PRINCIPLES |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| IEC 60068-2-9:1975 | Environmental testing - Part 2: Tests. Guidance for solar radiation testing |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| ETS 300 001 : 20004 | ATTACHMENTS TO THE PUBLIC SWITCHED TELEPHONE NETWORK (PSTN); GENERAL TECHNICAL REQUIREMENTS FOR EQUIPMENT CONNECTED TO AN ANALOGUE SUBSCRIBER INTERFACE IN THE PSTN |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.