EN ISO 7250 : 1997
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN
Published date
12-01-2013
Publisher
Superseded date
01-03-2010
Superseded by
Sorry this product is not available in your region.
1 Scope
2 Definitions
2.1 Population group
2.2 Anthropometric terms
3 Measuring conditions
3.1 Clothing of subject
3.2 Support surfaces
3.3 Body symmetry
3.4 Measuring tools
3.5 Further conditions
4 Basic anthropometric measurements
4.1 Measurements taken while subject stands
4.2 Measurements taken while subject sits
4.3 Measurements on specific body segments
4.4 Functional measurements
Annex A (informative) Bibliography
Annex ZA (informative) Clauses of this European standard
addressing essential requirements or
other provisions of EU directives
Gives a description of anthropometric measurements for use as a base for comparison of population groups. Intended as a guide for ergonomists required to specify population groups and apply their knowledge to the geometric design of the places where people work and live.
| Committee |
TC 122
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ISO 7250:1996 | Identical |
| NEN EN ISO 7250 : 1997 | Identical |
| NF EN ISO 7250 : 1997 | Identical |
| NS EN ISO 7250 : 1997 | Identical |
| BS EN ISO 7250:1998 | Identical |
| NBN EN ISO 7250 : 1997 | Identical |
| DIN EN ISO 7250:1997-10 | Identical |
| I.S. EN ISO 7250:1998 | Identical |
| PN EN ISO 7250 : 2005 | Identical |
| UNE-EN ISO 7250:1998 | Identical |
| BS EN 15895 : 2011 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| 14/30303750 DC : 0 | BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS |
| 11/30244210 DC : 0 | BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| 05/30117627 DC : DRAFT JUNE 2005 | BS ISO 11228-3 - ERGONOMICS - MANUAL HANDLING - PART 3: HANDLING OF LOW LOADS AT HIGH FREQUENCY |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 1005-1:2001+A1:2008 | Safety of machinery - Human physical performance - Part 1: Terms and definitions |
| EN 12757-1:2005+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| 11/30244198 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS |
| 14/30303756 DC : 0 | BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS; DESIGN AND SAFETY REQUIREMENTS |
| PREN 16282-5 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| 11/30244195 DC : 0 | BS EN 16282-2 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS |
| 03/118275 DC : DRAFT NOV 2003 | BS EN 14803 - IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE |
| 02/561267 DC : DRAFT MAR 2002 | PREN 14386 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES FOR THE OPERABILITY OF MOBILE MACHINERY |
| DIN EN 1005-1:2009-04 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| DIN EN 13000:2014-11 | Cranes - Mobile Cranes; German version EN 13000:2010+A1:2014 |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 12757-1 : 2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| I.S. EN 1005-1:2002 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| DIN EN 1915-1:2001-06 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 12757-1:2005 | MIXING MACHINERY FOR COATING MATERIALS - SAFETY REQUIREMENTS - PART 1: MIXING MACHINERY FOR USE IN VEHICLE REFINISHING |
| I.S. EN 1915-1:2013 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| DIN EN 1760-1:1997-09 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
| PREN 16282-7 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| 14/30303762 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| S.R. CEN TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
| 05/19982359 DC : DRAFT MAR 2005 | BS ISO 11228-2 - ERGONOMICS - MANUAL HANDLING - PART 2: PUSHING AND PULLING |
| 10/30214958 DC : 0 | BS EN 1915-1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 1: BASIC SAFETY REQUIREMENTS |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| EN 15895:2011+A1:2018 | Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools |
| DIN EN ISO 11064-3:2000-09 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 3: CONTROL ROOM LAYOUT |
| BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 14803:2006 | Identification and/or determination of the quantity of waste |
| ONORM EN 14803 : 2006 | IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE |
| I.S. EN 14803:2006 | IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE |
| I.S. EN ISO 11064-3:1999 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 3: CONTROL ROOM LAYOUT |
| 11/30244204 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT - DESIGN AND DIMENSIONING |
| 04/19985587 DC : 0 | BS EN 894-4 - SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| 14/30303753 DC : 0 | BS EN 16282-5 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 5: AIR DUCT; DESIGN AND DIMENSIONING |
| PREN 16282-3 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| 04/30109749 DC : DRAFT JUL 2004 | ISO 9355-4 - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| 14/30303759 DC : 0 | BS EN 16282-7 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 7: INSTALLATION AND USE OF FIXED FIRE SUPPRESSION SYSTEMS |
| 11/30244207 DC : 0 | BS EN 16282-6 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION OF COMMERCIAL KITCHENS - PART 6: AEROSOL SEPARATORS - DESIGN AND SAFETY REQUIREMENTS |
| PREN 16282-8 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES; REQUIREMENTS AND TESTING |
| DIN EN 12757-1:2011-02 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010) |
| BS EN 1005-1 : 2001 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 1: TERMS AND DEFINITIONS |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| BS EN ISO 11064-3:2000 | Ergonomic design of control centres Control room layout |
| ISO 11064-3:1999 | Ergonomic design of control centres — Part 3: Control room layout |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| BS EN 14803:2006 | Identification and/or determination of the quantity of waste |
| BS EN 1760-1 : 1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 1760-1:1997+A1:2009 | Safety of machinery - Pressure sensitive protective devices - Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
| 14/30303747 DC : 0 | BS EN 16282-3 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS; DESIGN AND SAFETY REQUIREMENTS |
| PREN 16282-4 : DRAFT 2014 | EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS; DESIGN AND SAFETY REQUIREMENTS |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
| 11/30244201 DC : 0 | BS EN 16282-4 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS |
| 11/30244213 DC : 0 | BS EN 16282-8 - EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF COOKING FUMES - REQUIREMENTS AND TESTING |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| I.S. EN 15895:2011 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| DIN EN 1760-1:2009-08 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 1915-1:2013 | Aircraft ground support equipment. General requirements Basic safety requirements |
| DIN EN 14803:2006-05 | IDENTIFICATION AND/OR DETERMINATION OF THE QUANTITY OF WASTE |
| CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
| DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| DIN EN 15895:2011-08 | CARTRIDGE OPERATED HAND-HELD TOOLS - SAFETY REQUIREMENTS - FIXING AND HARD MARKING TOOLS |
| I.S. EN 1760-1:1998 | SAFETY OF MACHINERY - PRESSURE SENSITIVE PROTECTIVE DEVICES - PART 1: GENERAL PRINCIPLES FOR THE DESIGN AND TESTING OF PRESSURE SENSITIVE MATS AND PRESSURE SENSITIVE FLOORS |
| I.S. EN 13898:2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| UNE-EN 1915-1:2013 | Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements |
| UNE-EN 12757-1:2006+A1:2010 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 12757-1:2006 | Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.