EN ISO 7090:2000
Current
The latest, up-to-date edition.
Plain washers, chamfered - Normal series - Product grade A (ISO 7090:2000)
01-06-2000
Foreword
1 Scope
2 Normative references
3 Dimensions
4 Requirements and International Standards of reference
5 Designation
Annex ZA (normative) Normative references to international
publications with their relevant European publications
Characteristics of normal-series, product-grade-A plain washers chamfered at the outside diameter, in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameter) ranging from 5 mm to 64 mm inclusive. 200 HV are suitable for: bolts and screws of grades A & B/property classes up to/incl 8.8; nuts of grades A & B/property classes up to/incl. 8; bolts, screws and nuts of stainless steel of similar chemical compositions; case hardened thread rolling screws. 300 HV are suitable for bolts and screws of product grades A & B/property classes up to/ incl. 10. Dimensions other than those in this standard should be selected from those given in ISO 887.
| Committee |
CEN/TC 185
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| PN EN ISO 7090 : 2003 | Identical |
| NBN EN ISO 7090 : 2000 | Identical |
| I.S. EN ISO 7090:2000 | Identical |
| NEN EN ISO 7090 : 2000 | Identical |
| NF EN ISO 7090 : 2000 | Identical |
| DIN EN ISO 7090:2000-11 | Identical |
| ISO 7090:2000 | Identical |
| NS EN ISO 7090 : 2ED 2000 | Identical |
| BS EN ISO 7090:2000 | Identical |
| UNE-EN ISO 7090:2000 | Identical |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ONORM EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| BS EN 1993-1-4 : 2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
| I.S. EN 1993-1-4:2006 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS (INCLUDING IRISH NATIONAL ANNEX) |
| VDI/VDE 3845 Blatt 1:2010-09 | Industrial process control - Pneumatic control valves - Interfaces of valves and auxiliary equipment |
| DIN 25201-4:2010-03 (Draft) | DESIGN GUIDE FOR RAILWAY VEHICLES AND THEIR COMPONENTS - BOLTED JOINTS - PART 4: SECURING OF BOLTED JOINTS |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN 1993-1-4:2015-10 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| UNE-EN 1993-1-4:2012 | Eurocode 3 - Design of steel structures - Part 1-4: General rules - Supplementary rules for stainless steels |
| I.S. EN 1993-1-8:2005 | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS (INCLUDING IRISH NATIONAL ANNEX) |
| UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| ISO 6507-1:2005 | Metallic materials — Vickers hardness test — Part 1: Test method |
| ISO 10683:2014 | Fasteners — Non-electrolytically applied zinc flake coatings |
| ISO 4759-3:2016 | Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F |
| ISO 4042:1999 | Fasteners — Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs |
| EN ISO 4042:1999 | Fasteners - Electroplated coatings (ISO 4042:1999) |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| EN ISO 4759-3:2016 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| ISO 887:2000 | Plain washers for metric bolts, screws and nuts for general purposes — General plan |
| ISO 3269:2000 | Fasteners — Acceptance inspection |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.