Customer Support: 131 242

  • Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

EN ISO 6878:2004

Current

Current

The latest, up-to-date edition.

Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004)

Published date

01-06-2004

Sorry this product is not available in your region.

Foreword
Introduction
1 Scope
2 Interferences
3 Principle
4 Determination of orthophosphate
5 Determination of orthophosphate after solvent
  extraction
6 Determination of hydrolysable phosphate and
  orthophosphate
7 Determination of total phosphorus after
  peroxodisulfate oxidation
8 Determination of total phosphorus after nitric
  acid-sulfuric acid digestion
Annex A (informative) - Interferences
Annex B (informative) - Precision data
Bibliography

ISO 6878:2004 specifies methods for the determination of orthophosphate, orthophosphate after solvent extraction, hydrolysable phosphate plus orthophosphate, and total phosphorus after decomposition.The methods are applicable to all kinds of water including seawater and effluents. Phosphorus concentrations within the range of 0,005 mg/l to 0,8 mg/l may be determined in such samples without dilution.A solvent extraction procedure allows smaller phosphorus concentrations to be determined with a detection limit of about 0,000 5 mg/l.

Committee
CEN/TC 230
DevelopmentNote
Supersedes EN 1189. (06/2004)
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current
Supersedes

16/30329428 DC : 0 BS EN 12566-6 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT
16/30329416 DC : 0 BS EN 12566-3 - SMALL WASTEWATER TREATMENT SYSTEMS UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
I.S. EN 12566-7:2016 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS
BS EN 12566-6:2013 Small wastewater treatment systems for up to 50 PT Prefabricated treatment units for septic tank effluent
I.S. EN 12566-3:2016 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
BS EN 15487:2007 Ethanol as a blending component for petrol. Determination of phosphorus content. Ammonium molybdate spectrometric method
EN 12566-6:2016 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent
EN 12566-3:2016 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
EN 12566-7:2016 Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units
DIN EN 14672:2005-10 Characterization of sludges - Determination of total phosphorus; German version EN 14672:2005
DIN EN 16058:2012-07 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD
I.S. EN 15664-1:2008 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION
BS EN 15664-1 : 2008 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION
PREN 15487 : DRAFT 2006 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
BS 2000-555(2007) : 2007 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
PREN 12566-6 : DRAFT 2015 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT
UNI EN 15664-1 : 2014 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION
DIN EN 15664-1:2014-03 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION
VDI 4630:2016-11 Fermentation of organic materials - Characterization of the substrate, sampling, collection of material data, fermentation tests
VDI 4320 Blatt 3:2017-01 Measurement of atmospheric depositions - Determination of the deposition of water-soluble anions and cations - Sampling with bulk- and wet only-collectors
VDI 3455:2013-08 Emission control - High-volume car body painting plants
07/30162208 DC : 0 BS EN 15664-1 - INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF METAL RELEASE - PART 1: DESIGN AND OPERATION
06/30147354 DC : DRAFT MAR 2006 EN 15487 - ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF PHOSPHORUS CONTENT - AMMONIUM MOLYBDATE SPECTROMETRIC METHOD
16/30329422 DC : 0 BS EN 12566-7 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS
UNE-EN 12566-6:2017 Small wastewater treatment systems for up to 50 PT - Part 6: Prefabricated treatment units for septic tank effluent
10/30213237 DC : 0 BS EN 16058 - INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD
UNI EN 16058 : 2012 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD
I.S. EN 16058:2012 INFLUENCE OF METALLIC MATERIALS ON WATER INTENDED FOR HUMAN CONSUMPTION - DYNAMIC RIG TEST FOR ASSESSMENT OF SURFACE COATINGS WITH NICKEL LAYERS - LONG-TERM TEST METHOD
PREN 12566-7 : DRAFT 2015 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 7: PREFABRICATED TERTIARY TREATMENT UNITS
UNE-EN 12566-7:2017 Small wastewater treatment systems for up to 50 PT - Part 7: Prefabricated tertiary treatment units
UNE-EN 15664-1:2008 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation
UNE-EN 12566-3:2017 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants
BS EN 12566-3 : 2005 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 3: PACKAGED AND/OR SITE ASSEMBLED DOMESTIC WASTEWATER TREATMENT PLANTS
BS EN 14672:2005 Characterization of sludges. Determination of total phosphorous
EN 15487:2007 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
EN 14672:2005 Characterization of sludges - Determination of total phosphorus
EN 15664-1:2008+A1:2013 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of metal release - Part 1: Design and operation
EN 16058:2012 Influence of metallic materials on water intended for human consumption - Dynamic rig test for assessment of surface coatings with nickel layers - Long-term test method
BS EN 16058:2012 Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method
08/30187745 DC : 0 BS EN 12566-6 - SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT
I.S. EN 12566-6:2016 SMALL WASTEWATER TREATMENT SYSTEMS FOR UP TO 50 PT - PART 6: PREFABRICATED TREATMENT UNITS FOR SEPTIC TANK EFFLUENT
BS EN 12566-7:2013 Small wastewater treatment systems for up to 50 PT Prefabricated tertiary treatment units
DIN EN 15487:2007-11 Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.