EN ISO 6427:2014
Current
Current
The latest, up-to-date edition.
Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013)
Published date
04-06-2014
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Reagents and materials
4 Apparatus
5 Preparation of test sample
6 Number of tests
7 Procedure
8 Expression of results
9 Precision
10 Test report
Annex A (normative) - Procedure for casting, drying, and
cutting films of cellulose acetate
Annex B (normative) - Determination of solubility of
polypropylene in cold p-xylene
Bibliography
ISO 6427:2013 specifies methods for the determination of components in plastics that can be extracted by hot organic liquids near their boiling points. For one special case, a so-called cold-extraction method is given.The extractable components can be monomers, oligomers, polymers, plasticizers, stabilizers, etc. The kind and percentage of extractable matter influence the properties of plastics.The recommended extraction liquid depends on the type of plastic and on the purpose of the determination. The extracted amounts of special constituents are often not quantitative in the sense of analytical chemistry.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 6427:1998-10 | Identical |
| ISO 6427:2013 | Identical |
| NBN EN ISO 6427 : 2014 | Identical |
| NF EN ISO 6427 : 2014 | Identical |
| NEN EN ISO 6427 : 2014 | Identical |
| NS EN ISO 6427 : 2014 | Identical |
| I.S. EN ISO 6427:2014 | Identical |
| PN EN ISO 6427 : 2014 | Identical |
| SN EN ISO 6427 : 2014 | Identical |
| UNI EN ISO 6427 : 2014 | Identical |
| SS-EN ISO 6427:2014 | Identical |
| UNE-EN ISO 6427:2015 | Identical |
| BS EN ISO 6427:2014 | Identical |
| DIN EN ISO 6427:2014-08 | Identical |
| PREN 13361 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| PREN 13491 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| 16/30338114 DC : 0 | BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS |
| EN 13491:2018 | Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures |
| 16/30338105 DC : 0 | BS EN 16994 - CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| 16/30338123 DC : 0 | BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| UNI CEN/TS 15968 : 2010 | Determination of extractable perfluoro octane sulfonate (PFOS) in solid, coated and impregnated articles, in liquids and fire-fighting foams - Method for sampling, extraction and analysis by means of LC-qMS or LC-MS |
| BS EN 16993:2018 | Geosynthetic barriers. Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| PREN 13362 : DRAFT 2012 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| EN 13493:2018 | Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites |
| 16/30338108 DC : DRAFT JULY 2016 | BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| 16/30338117 DC : 0 | BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| 16/30338111 DC : 0 | BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| CEI EN 62788-1-6 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| I.S. EN 13492:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| I.S. EN 13491:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES |
| PD CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams. Method for sampling, extraction and analysis by LCqMS or LC-tandem/MS |
| BS EN 16994:2018 | Clay Geosynthetic Barriers. Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| BS EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| PREN 13493 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| PREN 13492 : DRAFT 2016 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| I.S. EN 16994:2018 | CLAY GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF UNDERGROUND STRUCTURES (OTHER THAN TUNNELS AND ASSOCIATED STRUCTURES) |
| S.R. CEN TS 15968:2010 | DETERMINATION OF EXTRACTABLE PERFLUOROOCTANESULPHONATE (PFOS) IN COATED AND IMPREGNATED SOLID ARTICLES, LIQUIDS AND FIRE FIGHTING FOAMS - METHOD FOR SAMPLING, EXTRACTION AND ANALYSIS BY LC-QMS OR LC-TANDEM/MS |
| EN 13362:2018 | Geosynthetic Barriers - Characteristics required for use in the construction of canals |
| EN 15382:2018 | Geosynthetic barriers - Characteristics required for use in transportation infrastructure |
| EN 13492:2018 | Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment |
| I.S. EN 13493:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES |
| I.S. EN 15382:2013 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| EN 16993:2018 | Geosynthetic barriers - Characteristics required for use in the construction of storage lagoons, secondary containment (above and below ground) and other containment applications for chemicals, polluted water and produced liquids |
| 16/30338126 DC : 0 | BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT |
| I.S. EN 16993:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS |
| EN 16994:2018 | Clay Geosynthetic Barriers - Characteristics required for use in the construction of underground structures (other than tunnels and associated structures) |
| 16/30338120 DC : 0 | BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE |
| I.S. EN 13362:2018 | GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS |
| I.S. EN 62788-1-6:2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| BS EN 13362:2018 | Geosynthetic Barriers. Characteristics required for use in the construction of canals |
| CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS |
| ISO 1873-1:1995 | Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications |
| ISO 565:1990 | Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings |
| ISO 383:1976 | Laboratory glassware — Interchangeable conical ground joints |
| ISO 1773:1997 | Laboratory glassware — Narrow-necked boiling flasks |
| ISO 1875:1982 | Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether |
| ISO 308:1994 | Plastics Phenolic moulding materials Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) |
| ISO 1872-1:1993 | Plastics Polyethylene (PE) moulding and extrusion materials Part 1: Designation system and basis for specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.