EN ISO 291:2008
Current
Current
The latest, up-to-date edition.
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
Published date
01-05-2008
Publisher
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Standard atmosphere
6 Classes of standard atmosphere
7 Standard and ambient temperatures
8 Procedure
Annex A (normative) Attainment of moisture equilibrium by
plastics in a conditioning atmosphere
Annex B (informative) Background information
Bibliography
ISO 291:2008 sets out specifications relating to the conditioning and testing of all plastics and all types of test specimen at constant atmospheric conditions.Special atmospheres applicable to a particular test or material or simulating a particular climatic environment are not included in this International Standard.
| Committee |
CEN/TC 249
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| DIN EN ISO 291:2008-08 | Identical |
| NBN EN ISO 291 : 2008 | Identical |
| NEN EN ISO 291 : 2008 | Identical |
| SN EN ISO 291:2008 | Identical |
| SS-EN ISO 291 : 2008 | Identical |
| PN EN ISO 291 : 2010 | Identical |
| BS EN ISO 291:2008 | Identical |
| NF EN ISO 291 : 2008 | Identical |
| UNI EN ISO 291 : 2008 | Identical |
| I.S. EN ISO 291:2008 | Identical |
| UNE-EN ISO 291:2008 | Identical |
| ISO 291:2008 | Identical |
| NS EN ISO 291 : 3ED 2008 | Identical |
| 08/30180284 DC : DRAFT JUNE 2008 | BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| NF EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13121-3:2016 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| BS EN 62788-1-4:2016 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| PREN 14869-1 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 1389:2004 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - PHYSICAL PROPERTIES - DETERMINATION OF DENSITY AND APPARENT POROSITY |
| DIN EN 15865:2009-08 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| 06/30147002 DC : 0 | EN 15466-2 - PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 2: TEST METHOD FOR THE DETERMINATION OF RESISTANCE AGAINST ALKALI |
| DIN EN 16245-3:2013-08 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| I.S. EN 1967:2002 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| BS EN 17098-2:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Method for film permeability determination using a static technique |
| PD CEN/TR 14548:2003 | Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| BS EN 16245-3:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre |
| 10/30231826 DC : 0 | BS EN 14869-2 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| DIN EN 15466-2:2009-10 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali; German version EN 15466-2:2009 |
| 13/30290552 DC : 0 | BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| 14/30294070 DC : 0 | BS EN 59 - GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
| 11/30197617 DC : 0 | BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION |
| I.S. EN 16245-5:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| CEI EN 62788-1-4 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE, YELLOWNESS INDEX, AND UV CUT-OFF WAVELENGTH |
| UNI EN 16245-5 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| I.S. EN 455-4:2009 | MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION |
| I.S. EN 16245-4:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| I.S. EN 60695-11-20:2015 | FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHODS |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| UNE-EN 62788-1-4:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength |
| I.S. EN 15651-4:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| UNI EN 16245-3 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| I.S. EN 60695-11-5:2017 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| UNE-EN 15651-4:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways |
| 17/30353403 DC : 0 | BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS |
| I.S. EN 50655-1:2017 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| UNI EN 15860 : 2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| EN 14565:2004 | Resilient floor coverings - Floor coverings based upon synthetic thermoplastic polymers - Specification |
| I.S. EN 15865:2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| I.S. EN ISO 180:2001 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000) |
| DIN EN 13592:2015-09 (Draft) | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| DIN EN 14598-3:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| DIN EN 13421:2006-05 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| DIN EN 14598-2:2005-07 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements |
| BS EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components |
| BS EN 14415:2004 | Geosynthetic barriers. Test method for determining the resistance to leaching |
| BS EN 14869-2:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Thick adherends shear test |
| BS EN ISO 1622-2:1999 | Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 11542-2 : 1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 1965-2:2011 | Structural adhesives. Corrosion Determination and classification of corrosion to a brass substrate |
| UNE-EN 16245-2:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS EN ISO 7765-1:2004 | Plastics film and sheeting. Determination of impact resistance by the free-falling dart method Staircase methods |
| BS EN 14350-1:2004 | Child use and care articles. Drinking equipment General and mechanical requirements and tests |
| BS EN ISO 868:2003 | Plastics and ebonite. Determination of indentation hardness by means of a durometer (Shore hardness) |
| BS EN ISO 8295:2004 | Plastics. Film and sheeting. Determination of the coefficients of friction |
| UNE-EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN ISO 9142:2003 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| DIN EN 1967:2003-02 | STRUCTURAL ADHESIVES - EVALUATION OF THE EFFECTIVENESS OF SURFACE TREATMENT TECHNIQUES FOR ALUMINIUM USING A WET PEEL TEST IN ASSOCIATION WITH THE FLOATING ROLLER METHOD |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| EN 12654-1:1998 | Textile glass - Yarns - Part 1: Designation |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN 12943:1999 | Filler materials for thermoplastics - Scope, designation, requirements, tests |
| EN 12586:2007+A1:2011 | Child use and care articles - Soother holder - Safety requirements and test methods |
| DIN EN 14879-2:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 1007-1:2002 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content |
| EN 12562:1999 | Textiles - Para-aramid multifilament yarns - Test methods |
| EN 12654-3:1998 | Textile glass - Yarns - Part 3: General requirements for general applications |
| DIN EN 14447:2005-07 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification; German version of EN 14447:2005 |
| EN 50655-1:2017 | Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds |
| DIN EN 13592:2017-05 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| EN 62878-1-1:2015 | Device embedded substrate - Part 1-1: Generic specification - Test methods |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| EN 13121-3:2016 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| I.S. EN ISO 6186:1999 | PLASTICS - DETERMINATION OF POURABILITY |
| VDI 3405 Blatt 1.1:2017-08 (Draft) | Additive manufacturing processes - Laser sintering of polymer parts - Qualification of materials |
| DIN EN 13696:2009-02 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| ONORM EN ISO 11542-2 : 2009 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| 02/102695 DC : DRAFT MAY 2002 | PREN 14415 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR DETERMINING THE RESISTANCE TO LEACHING |
| BS EN 455-4:2009 | Medical gloves for single use Requirements and testing for shelf life determination |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 17/30353428 DC : DRAFT JUNE 2017 | BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| BS EN 62631-1:2011 | Dielectric and resistive properties of solid insulating materials General |
| BS EN 60695-11-10:2013 | Fire hazard testing Test flames. 50 W horizontal and vertical flame test methods |
| BS EN 16245-5:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for core materials |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| PREN 17098-2 : DRAFT 2017 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| I.S. EN 14350-1:2004 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
| PREN 28510-1 : DRAFT 2013 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| 11/30239977 DC : 0 | BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| CEI EN 60695-11-5 : 2006 | FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE |
| CEI EN 62631-1 : 2012 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| DIN EN 16245-2:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| I.S. EN 62788-1-4:2016 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-4: ENCAPSULANTS - MEASUREMENT OF OPTICAL TRANSMITTANCE AND CALCULATION OF THE SOLAR-WEIGHTED PHOTON TRANSMITTANCE, YELLOWNESS INDEX, AND UV CUT-OFF WAVELENGTH |
| 09/30200088 DC : 0 | BS EN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| DIN EN 15336:2007-05 | Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified) |
| DIN EN 14879-6:2010-04 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| BS EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Combined linings with tile and brick layers |
| NF EN 14879-6 : 2010 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| PREN 50655-1 : DRAFT 2015 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| 10/30231832 DC : 0 | BS EN 14869-1 - STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| BS EN 60695-2-12 : 2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| DIN EN 15651-4:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| 08/30184645 DC : DRAFT SEP 2008 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| PREN 13592 : DRAFT 2015 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| BS ISO 7391-2 : 1996 AMD 10746 | PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 15466-2 : 2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 2: DETERMINATION OF RESISTANCE AGAINST ALKALI |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| BS EN 15865:2009 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| DIN EN 16776:2016-09 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| PREN 15860 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| I.S. EN 62788-1-5:2016 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS |
| PREN 4691-1 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| BS EN 50655-1:2017 | Electric cables. Accessories. Material characterization Fingerprinting for resinous compounds |
| UNE-EN 16245-3:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| UNE-EN 15466-3:2010 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles |
| UNI EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| I.S. EN 16776:2016 | RESILIENT FLOOR COVERINGS - HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules - Part 1-6: Encapsulants - Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| I.S. EN 14565:2004 | RESILIENT FLOOR COVERINGS - FLOOR COVERINGS BASED UPON SYNTHETIC THERMOPLASTIC POLYMERS - SPECIFICATION |
| DIN EN 1389:2004-03 | Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity |
| DIN EN 1464:2010-06 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| DIN EN 14350-1:2004-11 | CHILD USE AND CARE ARTICLES - DRINKING EQUIPMENT - PART 1: GENERAL AND MECHANICAL REQUIREMENTS AND TESTS |
| DIN EN 1465:2009-07 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| DIN EN 12654-2:1998-12 | Textile glass - Yarns - Part 2: Methods of test and general specifications; German version EN 12654-2:1998 |
| BS EN ISO 180 : 2001 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| BS EN 1465:2009 | Adhesives. Determination of tensile lap-shear strength of bonded assemblies |
| BS EN ISO 15526-2:2004 | Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN ISO 9653:2000 | Adhesives. Test method for shear strength of adhesive bonds |
| BS EN 12586 : 2007 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 6603-1:2000-10 | PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 1: NON-INSTRUMENTED IMPACT TESTING |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN ISO 4577:1999 | Plastics. Polypropylene and propylene-copolymers. Determination of thermal oxidative stability in air. Oven method |
| BS EN 14598-2:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements |
| BS EN 1967:2002 | Structural adhesives. Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| BS EN ISO 14129:1998 | Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
| I.S. EN ISO 15526-2:2004 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 1264-4:2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| I.S. EN 13592:2017 | PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| DIN 16726:2011-01 | PLASTIC SHEETING - TESTING |
| I.S. EN 28510-1:2014 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| I.S. EN 1965-2:2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| DIN EN 28510-1:2014-07 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| DIN EN ISO 11501:2004-10 | Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995) |
| I.S. EN ISO 4894-2:1999 | PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 12586:2007 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 1464:2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| I.S. EN 14869-1:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN 14869-2:2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| EN 62788-1-4:2016 | Measurement procedures for materials used in photovoltaic modules - Part 1-4: Encapsulants - Measurement of optical transmittance and calculation of the solar-weighted photon transmittance, yellowness index, and UV cut-off wavelength |
| I.S. EN ISO 11542-2:1999 | PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 12654-1:1999 | TEXTILE GLASS - YARNS - DESIGNATION |
| I.S. EN ISO 604:2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| DIN EN ISO 15526-2:2004-10 | PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN 13121-3:2016-10 | GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| I.S. EN ISO 899-2:2003 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING (ISO 899-2:2003) |
| I.S. EN 1465:2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES |
| VDI 2736 Blatt 1:2016-07 | Thermoplastic gear wheels - Materials, material selection, production methods, production tolerances, form design |
| VDI 3958 Blatt 12:2004-02 | Environmental simulation - Effects of acidic precipitation on polymers - Test methods |
| VDI 3405 Blatt 1:2013-10 | Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control |
| VDI 2083 Blatt 20:2016-10 (Draft) | Cleanroom technology - Determination of the desorption kinetics of materials after fumigating |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS 2782-5.531A(1999) : 1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| VDI 2019:2016-04 | Testing the adhesion of thermoplastic elastomers (TPE) on substrates |
| BS 7933-1:2007 | Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 15/30325650 DC : 0 | BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS |
| DIN EN 16245-4:2013-07 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| I.S. EN ISO 16101:2004 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING |
| BS EN 16776:2016 | Resilient floor coverings. Heterogeneous polyurethane floor coverings. Specification |
| BS EN 60216-8:2013 | Electrical insulating materials. Thermal endurance properties Instructions for calculating thermal endurance characteristics using simplified procedures |
| I.S. EN 1007-2:2002 | ADVANCED TECHNICAL CERAMICS - CERAMICS COMPOSITES - METHODS OF TEST FOR REINFORCEMENT - PART 2: DETERMINATION OF LINEAR DENSITY |
| I.S. EN 1007-1:2002 | ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENT - PART 1: DETERMINATION OF SIZE CONTENT |
| UNI EN 16245-4 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| 11/30237918 DC : 0 | BS EN ISO 13274 - PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING FOR PACKAGING AND IBCS |
| 11/30239983 DC : DRAFT MAR 2011 | BS EN 16245-4 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 4: SPECIFIC REQUIREMENTS FOR FABRICS |
| UNE-EN 16465:2016 | Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| BS EN 16465:2015 | Plastics. Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| UNI EN 455-4 : 2009 | MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| I.S. EN 1794-3:2016 | ROAD TRAFFIC NOISE REDUCING DEVICES - NON-ACOUSTIC PERFORMANCE - PART 3: REACTION TO FIRE - BURNING BEHAVIOUR OF NOISE REDUCING DEVICES AND CLASSIFICATION |
| 06/30147005 DC : 0 | EN 15466-3 - PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: TEST METHOD FOR THE DETERMINATION OF DRYING BEHAVIOUR AND SOLIDS CONTENT |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| NFC 33 009-1 : 2008 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| 15/30316097 DC : DRAFT FEB 2015 | BS EN 14903 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - DETERMINATION OF ROTATIONAL FRICTION |
| 02/121747 DC : DRAFT APR 2002 | PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 59:2016 | Glass reinforced plastics. Determination of indentation hardness by means of a Barcol hardness tester |
| NF EN 15466-3 : 2010 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: DETERMINATION OF SOLIDS CONTENT AND EVAPORATION BEHAVIOUR OF VOLATILES |
| CEI EN 62788-1-6 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| ISO 1110:1995 | Plastics Polyamides Accelerated conditioning of test specimens |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| EN ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I) - Requirements and test methods (ISO 14631:1999) |
| UNE-EN 16776:2016 | Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| HD 631.1 : 200S2 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| NF EN 15870 : 2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| BS EN 13121-3:2016 | GRP tanks and vessels for use above ground Design and workmanship |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN 15860:2010 | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15870:2009 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| I.S. EN 16245-2:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| I.S. EN 60695-11-10:2013 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS (IEC 60695-11-10:2013 (EQV)) |
| EN 17098-2:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 2: Method for film permeability determination using a static technique |
| UNE-EN 13121-3:2017 | GRP tanks and vessels for use above ground - Part 3: Design and workmanship |
| EN 17098-1:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films |
| NF EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| EN ISO 4612:1999 | Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method (ISO 4612:1999) |
| UNE-EN 15860:2011 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| I.S. EN 59:2016 | GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNES BY MEANS OF A BARCOL HARDNESS TESTER |
| I.S. EN ISO 4612:1999 | PLASTICS - PREPARATION OF PVC PASTES FOR TEST PURPOSES - PLANETARY-MIXER METHOD |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| DIN EN 12654-3:1998-12 | Textile glass - Yarns - Part 3: General requirements for general applications; German version EN 12654-3:1998 |
| DIN EN 12586:2011-04 | Child use and care articles - Soother holder - Safety requirements and test methods (includes Amendment A1:2011) |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN ISO 16101:2004-12 | PACKAGING - TRANSPORT PACKAGING FOR DANGEROUS GOODS - PLASTICS COMPATIBILITY TESTING |
| DIN EN 1264-4:2009-11 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| DIN EN 14869-1:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| BS EN 14869-1:2011 | Structural adhesives. Determination of shear behaviour of structural bonds Torsion test method using butt-bonded hollow cylinders |
| ISO 6186:1998 | Plastics — Determination of pourability |
| BS EN ISO 6603-1:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics Non-instrumented impact testing |
| BS EN 13592:2017 | Plastics sacks for household waste collection. Types, requirements and test methods |
| BS EN 13421:2006 | Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| BS EN 1389:2003 | Advanced technical ceramics. Ceramic composites. Physical properties. Determination of density and apparent porosity |
| BS EN ISO 6383-2:2004 | Plastics. Film and sheeting. Determination of tear resistance Elmendorf method |
| BS EN 15336:2007 | Adhesives. Determination of the time to rupture of bonded joints under static load |
| BS EN 1264-4:2009 | Water based surface embedded heating and cooling systems Installation |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| UNI EN ISO 180 : 2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| EN 16245-2:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers |
| EN ISO 2039-1:2003 | Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001) |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| UNI EN 1465 : 2009 | ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES |
| UNI EN 14869-2 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| UNI EN 14869-1 : 2011 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 1: TORSION TEST METHOD USING BUTT-BONDED HOLLOW CYLINDERS |
| I.S. EN ISO 3146:2000 | PLASTICS - DETERMINATION OF MELTING BEHAVIOUR (MELTING TEMPERATURE OR MELTING RANGE) OF SEMI-CRYSTALLINE POLYMERS BY CAPILLARY TUBE AND POLARIZING-MICROSCOPE METHODS |
| UNI EN 16245-2 : 2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS |
| UNI EN 28510-1 : 2014 | ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| I.S. EN ISO 14125:1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| I.S. EN ISO 9773:1998 | PLASTICS - DETERMINATION OF BURNING BEHAVIOUR OF THIN FLEXIBLE VERTICAL SPECIMENS IN CONTACT WITH A SMALL-FLAME IGNITION SOURCE |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| UNI EN ISO 604 : 2008 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| UNI EN 12586 : 2011 | CHILD USE AND CARE ARTICLES - SOOTHER HOLDER - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 1965-2 : 2011 | STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| UNI EN 1966 : 2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| UNI EN 14879-6 : 2010 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| UNI EN 1464 : 2010 | ADHESIVES - DETERMINATION OF PEEL RESISTANCE OF ADHESIVE BONDS - FLOATING ROLLER METHOD |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 15466-3:2009 | Primers for cold and hot applied joint sealants Determination of solids content and evaporation behaviour of volatiles |
| 12/30254141 DC : 0 | BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| DIN EN 16245-5:2013-08 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| PREN 59 : DRAFT 2014 | GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| I.S. EN ISO 9653:2000 | ADHESIVES - TEST METHOD FOR SHEAR IMPACT STRENGTH OF ADHESIVE BONDS |
| DIN EN 59:2016-06 | GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A BARCOL HARDNESS TESTER |
| 06/30155368 DC : 0 | PREN 14879-6 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| PREN 14869-2 : DRAFT 2010 | STRUCTURAL ADHESIVES - DETERMINATION OF SHEAR BEHAVIOUR OF STRUCTURAL BONDS - PART 2: THICK ADHERENDS SHEAR TEST |
| 11/30239986 DC : DRAFT MAR 2011 | BS EN 16245-5 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 5: SPECIFIC REQUIREMENTS FOR CORE MATERIALS |
| BS EN 15870:2009 | Adhesives. Determination of tensile strength of butt joints |
| BS EN 16245-2:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers |
| PREN 15651-4 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS |
| CEI EN 62788-1-5 : 1ED 2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS |
| DIN EN 15466-3:2009-10 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles |
| 17/30348289 DC : 0 | BS EN 17098-2 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| 05/30139278 DC : DRAFT SEP 2005 | EN 15336 - ADHESIVES - DETERMINATION OF THE TIME TO RUPTURE OF BONDED JOINTS UNDER STATIC LOAD |
| UNE-EN 15466-2:2010 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali |
| BS EN 62878-1-1:2015 | Device embedded substrate Generic specification. Test methods |
| 11/30239980 DC : DRAFT MAR 2011 | BS EN 16245-3 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| BS EN 62788-1-6:2017 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Test methods for determining the degree of cure in Ethylene-Vinyl Acetate |
| DIN EN 16465:2015-12 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| UNI EN 13696 : 2009 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| 10/30231835 DC : DRAFT SEP 2010 | BS EN 1965-2 - STRUCTURAL ADHESIVES - CORROSION - PART 2: DETERMINATION AND CLASSIFICATION OF CORROSION TO A BRASS SUBSTRATE |
| UNE-EN 16245-4:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| I.S. EN 60695-2-13:2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| BS EN 62788-1-5:2016 | Measurement procedures for materials used in photovoltaic modules Encapsulants. Measurement of change in linear dimensions of sheet encapsulation material resulting from applied thermal conditions |
| UNE-EN 16245-5:2014 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| I.S. EN ISO 14632:1999 | EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS |
| UNI EN 15865 : 2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| BS EN 60695-11-20:2015 | Fire hazard testing Test flames. 500 W flame test methods |
| UNI EN 1264-4 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| 16/30341219 DC : 0 | BS EN 17022 - CHILD CARE ARTICLES - BATHING AIDS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNE-EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| I.S. EN 14879-6:2009 | ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 6: COMBINED LININGS WITH TILE AND BRICK LAYERS |
| 16/30317348 DC : 0 | BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16245-3:2013 | FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 3: SPECIFIC REQUIREMENTS FOR FIBRE |
| I.S. CEN TR 14548:2003 | ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES |
| I.S. EN 17098-2:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 2: METHOD FOR FILM PERMEABILITY DETERMINATION USING A STATIC TECHNIQUE |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| I.S. EN 13696:2009 | WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE |
| BS EN 17098-1:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| PREN 14903 : DRAFT 2015 | SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - DETERMINATION OF ROTATIONAL FRICTION |
| EN ISO 1110:1997 | Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995) |
| DIN EN ISO 14125:2011-05 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) |
| DIN EN ISO 11542-2:2010-01 | Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008) |
| DIN EN 1965-2:2011-07 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| DIN EN 13864:2004-09 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| BS EN ISO 16101:2004 | Packaging. Transport packaging for dangerous goods. Plastics compatibility testing |
| 02/124520 DC : DRAFT DEC 2002 | EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS |
| BS EN ISO 2039-1:2003 | Plastics. Determination of hardness Ball indentation method |
| ISO 9054:1990 | Cellular plastics, rigid — Test methods for self-skinned, high-density materials |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| BS EN ISO 2578:1999 | Plastics. Determination of the time-temperature limits after prolonged exposure to heat |
| BS EN 1464:2010 | Adhesives. Determination of peel resistance of adhesive bonds. Floating roller method |
| DIN EN ISO 604:2003-12 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS EN 12654-1:1999 | Textile glass. Yarns Designation |
| BS EN ISO 489:1999 | Plastics. Determination of refractive index |
| BS EN 12654-2:1999 | Textile glass. Yarns Methods of test and general specifications |
| BS EN 1007-2:2002 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of linear density |
| ISO 14632:1998 | Extruded sheets of polyethylene (PE-HD) Requirements and test methods |
| BS EN ISO 3672-2:2001 | Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| BS EN 1007-1:2002 | Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination of size content |
| BS EN 12943:2000 | Filler materials for thermoplastics. Scope, designation, requirements, tests |
| BS EN ISO 899-2 : 2003 | PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 2: FLEXURAL CREEP BY THREE-POINT LOADING |
| ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
| ISO 9773:1998 | Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| BS EN 14565:2004 | Resilient floor coverings. Floor coverings based upon synthetic thermoplastic polymers. Specification |
| ISO 7765-1:1988 | Plastics film and sheeting — Determination of impact resistance by the free-falling dart method — Part 1: Staircase methods |
| BS EN ISO 14632:1999 | Extruded sheets of polyethylene (PE-HD). Requirements and test methods |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| BS EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components |
| ISO 2039-1:2001 | Plastics — Determination of hardness — Part 1: Ball indentation method |
| ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I) Requirements and test methods |
| ISO 16101:2004 | Packaging Transport packaging for dangerous goods Plastics compatibility testing |
| UNE-EN 13592:2017 | Plastics sacks for household waste collection - Types, requirements and test methods |
| ISO 4894-2:1995 | Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 11501:1995 | Plastics Film and sheeting Determination of dimensional change on heating |
| ISO 3672-2:2000 | Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties |
| BS EN ISO 2039-2:2000 | Determination of Rockwell hardness. Rockwell hardness Rockwell hardness |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| BS EN 14598-3:2005 | Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements |
| ISO 9653:1998 | Adhesives Test method for shear impact strength of adhesive bonds |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| ISO 11542-2:1998 | Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| BS EN 13864:2004 | Surfaces for sports areas. Determination of tensile strength of synthetic yarns |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| BS EN ISO 7822:1999 | Textile glass reinforced plastics. Determination of void content. Loss on ignition, mechanical disintegration and statistical counting methods |
| BS EN ISO 11501:2004 | Plastics. Film and sheeting. Determination of dimensional change on heating Determination of dimensional change on heating of film and sheeting |
| UNE-EN 60695-11-20:2016 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods |
| UNE-EN 60695-11-10:2014 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| UNE-EN 12586:2008 | Child use and care articles - Soother holder - Safety requirements and test methods |
| BS EN ISO 11667:2000 | Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| ISO 899-2:2003 | Plastics — Determination of creep behaviour — Part 2: Flexural creep by three-point loading |
| EN 14350-1:2004 | Child use and care articles - Drinking equipment - Part 1: General and mechanical requirements and tests |
| EN 14447:2005 | Fibre reinforced plastics - Glass mat reinforced thermoplastics (GMT) - Determination of flowability and solidification |
| EN 14879-3:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| EN 14879-2:2006 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components |
| EN 1794-3:2016 | Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification |
| EN 14869-1:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 1: Torsion test method using butt-bonded hollow cylinders (ISO 11003-1:2001, modified) |
| EN ISO 15252-2:1999 | Plastics - Epoxy powder moulding compounds (EP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 15252-2:1999) |
| EN 16245-3:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 3: Specific requirements for fibre |
| EN 13696:2008 | Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 15466-2:2009 | Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali |
| EN ISO 14529-2:1999 | Plastics - Melamine/phenolic powder moulding compounds (MP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14529-2:1999) |
| EN ISO 2039-2:1999 | Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987) |
| EN 13592:2017 | Plastics sacks for household waste collection - Types, requirements and test methods |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN 13864:2004 | Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
| EN ISO 15526-2:2004 | Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000) |
| EN ISO 11468:1999 | Plastics - Preparation of PVC pastes for test purposes - Dissolver method (ISO 11468:1997) |
| EN 14869-2:2011 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN ISO 14130:1997 | Fibre-reinforced plastic composites - Determination of apparent interlaminar shear strength by short-beam method (ISO 14130:1997) |
| EN 1965-2:2011 | Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate |
| EN 16776:2016 | Resilient floor coverings - Heterogeneous polyurethane floor coverings - Specification |
| EN ISO 11248:1999 | Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993) |
| EN ISO 9054:1999 | Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990) |
| EN 15336:2007 | Adhesives - Determination of the time to rupture of bonded joints under static load ( ISO 15109:1998 modified) |
| EN ISO 3672-2:2001 | Plastics - Unsaturated-polyester resins (UP-R) - Part 2: Preparation of test specimens and determination of properties (ISO 3672-2:2000) |
| EN ISO 14530-2:1999 | Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999) |
| EN 14879-6:2009 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers |
| EN 1465:2009 | Adhesives - Determination of tensile lap-shear strength of bonded assemblies |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 16465:2015 | Plastics - Methods for the calibration of black-standard and white-standard thermometers and black-panel and white-panel thermometers for use in natural and artificial weathering |
| EN 14415:2004 | Geosynthetic barriers - Test method for determining the resistance to leaching |
| EN 15870:2009 | Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
| EN 59:2016 | Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
| EN ISO 604:2003 | Plastics - Determination of compressive properties (ISO 604:2002) |
| EN ISO 14528-2:1999 | Plastics - Melamine-formaldehyde powder moulding compounds (MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14528-2:1999) |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN ISO 4894-2:1999 | Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995) |
| EN ISO 8295:2004 | Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995) |
| EN 16245-5:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5: Specific requirements for core materials |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN 15466-3:2009 | Primers for cold and hot applied joint sealants - Part 3: Determination of solids content and evaporation behaviour of volatiles |
| EN ISO 14526-2:1999 | Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999) |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 6603-1:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing (ISO 6603-1:2000) |
| EN ISO 6383-2:2004 | Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983) |
| EN ISO 6186:1998 | Plastics - Determination of pourability (ISO 6186:1998) |
| EN ISO 9653:2000 | Adhesives - Test method for shear impact strength of adhesive bonds (ISO 9653:1998) |
| EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
| EN 455-4:2009 | Medical gloves for single use - Part 4: Requirements and testing for shelf life determination |
| EN ISO 7823-2:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
| EN ISO 14129:1997 | Fibre-reinforced plastic composites - Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the +/- 45° tension test method (ISO 14129:1997) |
| EN ISO 11501:2004 | Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995) |
| EN 1389:2003 | Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity |
| EN ISO 7822:1999 | Textile glass reinforced plastics - Determination of void content - Loss on ignition, mechanical disintegration and statistical counting methods (ISO 7822:1990) |
| EN 16245-4:2013 | Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics |
| EN 15865:2009 | Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified) |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| EN 28510-1:2014 | Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 1: 90º peel |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| EN ISO 14527-2:1999 | Plastics - Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF-MF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14527-2:1999) |
| EN ISO 7765-1:2004 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) |
| DIN EN 15870:2009-08 | ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
| UNE-EN 1794-3:2016 | Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification |
| UNI EN 15466-3 : 2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: DETERMINATION OF SOLIDS CONTENT AND EVAPORATION BEHAVIOUR OF VOLATILES |
| BS EN 1794-3:2016 | Road traffic noise reducing devices. Non-acoustic performance Reaction to fire. Burning behaviour of noise reducing devices and classification |
| 17/30348730 DC : 0 | BS EN 17072 - CHILD CARE ARTICLES - BATH TUBS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 14/30298583 DC : 0 | BS EN 13121-3 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| 15/30304269 DC : 0 | BS EN 16727-1 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - NON-ACOUSTIC PERFORMANCE - PART 1: MECHANICAL PERFORMANCE UNDER STATIC LOADINGS - CALCULATION AND TEST METHODS |
| BS EN 16245-4:2013 | Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fabrics |
| EN 62788-1-5:2016/AC:2017-11 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-5: ENCAPSULANTS - MEASUREMENT OF CHANGE IN LINEAR DIMENSIONS OF SHEET ENCAPSULATION MATERIAL RESULTING FROM APPLIED THERMAL CONDITIONS (IEC 62788-1-5:2016/COR1:2017) |
| 04/30076735 DC : DRAFT MAR 2004 | BS ISO 24335 - LAMINATE FLOOR COVERINGS - DETERMINATION OF IMPACT RESISTANCE |
| BS EN 15466-2:2009 | Primers for cold and hot applied joint sealants Determination of resistance against alkali |
| BS EN 60695-2-13 : 2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 15/30325373 DC : 0 | BS EN 13592 - PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| UNE-EN 60695-2-13:2011 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials |
| ISO 4612:1999 | Plastics Preparation of PVC pastes for test purposes Planetary-mixer method |
| 13/30281054 DC : 0 | BS EN 28510-1 - ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 1: 90 DEGREES PEEL |
| I.S. EN 15466-2:2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 2: DETERMINATION OF RESISTANCE AGAINST ALKALI |
| EN ISO 14632:1998 | Extruded sheets of polyethylene (PE-HD) - Requirements and test methods (ISO 14632:1998) |
| BS EN 13696:2008 | Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance |
| CEI 20-79 : 2009 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS |
| DIN EN 455-4:2009-10 | MEDICAL GLOVES FOR SINGLE USE - PART 4: REQUIREMENTS AND TESTING FOR SHELF LIFE DETERMINATION |
| I.S. EN 15466-3:2009 | PRIMERS FOR COLD AND HOT APPLIED JOINT SEALANTS - PART 3: DETERMINATION OF SOLIDS CONTENT AND EVAPORATION BEHAVIOUR OF VOLATILES |
| BS EN 15860:2010 | Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods |
| BS EN 60695-11-5:2017 | Fire hazard testing Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance |
| 14/30302995 DC : 0 | BS EN 16776 - RESILIENT FLOOR COVERINGS - HOMOGENEOUS AND HETEROGENEOUS POLYURETHANE FLOOR COVERINGS - SPECIFICATION |
| I.S. EN 16465:2015 | PLASTICS - METHODS FOR THE CALIBRATION OF BLACK-STANDARD AND WHITE-STANDARD THERMOMETERS AND BLACK-PANEL AND WHITE-PANEL THERMOMETERS FOR USE IN NATURAL AND ARTIFICIAL WEATHERING |
| 04/30091870 DC : DRAFT FEB 2004 | BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 60695-11-5:2017 | Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance |
| CEI EN 60216-8 : 2014 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES |
| I.S. EN 60695-2-12:2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| I.S. EN 17098-1:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| UNE-EN 62631-1:2012 | Dielectric and resistive properties of solid insulating materials - Part 1: General |
| I.S. EN 62788-1-6:2017 | MEASUREMENT PROCEDURES FOR MATERIALS USED IN PHOTOVOLTAIC MODULES - PART 1-6: ENCAPSULANTS - TEST METHODS FOR DETERMINING THE DEGREE OF CURE IN ETHYLENE-VINYL ACETATE |
| NF EN 15865 : 2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ON THREADED FASTENERS |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| NF EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| I.S. EN 60216-8:2013 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 8: INSTRUCTIONS FOR CALCULATING THERMAL ENDURANCE CHARACTERISTICS USING SIMPLIFIED PROCEDURES (IEC 60216-8:2013 (EQV)) |
| DIN EN 15860:2016-07 (Draft) | PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS |
| UNE-EN 60695-2-12:2011 | Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials |
| I.S. EN ISO 1110:1998 | PLASTICS - POLYAMIDES - ACCELERATED CONDITIONING OF TEST SPECIMENS |
| I.S. EN 62631-1:2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL |
| PREN 17129 : DRAFT 2017 | CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| BS EN ISO 4612:1999 | Plastics. Preparation of PVC pastes for test purposes. Planetary-mixer method |
| EN 15860:2010 | Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods |
| PREN 17072 : DRAFT 2017 | CHILD CARE ARTICLES - BATH TUBS AND STANDS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 7765-1:2004-10 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) |
| BS EN ISO 3146:2000 | Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| BS EN ISO 1163-2:2000 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties |
| BS EN 12654-3:1999 | Textile glass. Yarns General requirements for general applications |
| BS EN ISO 14130:1998 | Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
| BS EN 12562:1999 | Textiles. Para-aramid multifilament yarns. Test methods |
| ISO 3146:2000 | Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods |
| BS EN 28510-1:2014 | Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly 90° peel |
| BS EN 14447:2005 | Fibre reinforced plastics. Glass mat reinforced thermoplastics (GMT). Determination of flowability and solidification |
| BS EN ISO 11468:2000 | Plastics. Preparation of PVC pastes for test purposes. Dissolver method |
| BS EN ISO 6186:1999 | Plastics. Determination of pourability |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| ISO 6383-2:1983 | Plastics — Film and sheeting — Determination of tear resistance — Part 2: Elmendorf method |
| BS EN ISO 14631:1999 | Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods |
| ISO 15526-2:2000 | Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| 02/124519 DC : DRAFT DEC 2002 | EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
| UNE-EN 1264-4:2010 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| CEN/TR 14548:2003 | Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives |
| EN ISO 16101:2004 | Packaging - Transport packaging for dangerous goods - Plastics compatibility testing (ISO 16101:2004) |
| DIN EN ISO 8295:2004-10 | Plastics - Film and sheeting - Determination of the coefficients of friction (ISO 8295:1995); German version EN ISO 8295:2004 |
| DIN EN 14879-3:2007-02 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components |
| DIN EN 14869-2:2011-07 | Structural adhesives - Determination of shear behaviour of structural bonds - Part 2: Thick adherends shear test (ISO 11003-2:2001, modified) |
| EN 1007-2:2002 | Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density |
| EN 12654-2:1998 | Textile glass - Yarns - Part 2: Methods of test and general specifications |
| EN 13421:2006 | Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites |
| DIN EN ISO 6383-2:2004-10 | Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983) |
| EN 60216-8:2013 | Electrical insulating materials - Thermal endurance properties - Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures |
| DIN EN 14415:2004-08 | Geosynthetic barriers - Test method for determining the resistance to leaching |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| EN 62631-1 : 2011 | DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 1: GENERAL (IEC 62631-1:2011) |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| BS 2782-3.365C(1992) : 1992 AMD 10694 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 62:2008 | Plastics Determination of water absorption |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.