EN ISO 15927-1:2003
Current
The latest, up-to-date edition.
Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 1: Monthly means of single meteorological elements (ISO 15927-1:2003)
15-11-2003
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and units
3.1 Terms and definitions
3.2 Symbols and units
4 Periods over which parameters are calculated
5 Air temperature
5.1 Sources of data
5.2 Calculation of the monthly mean
5.3 Calculation of the standard deviation of daily means
about the monthly mean
5.4 Calculation of the annual mean and standard deviation
5.5 Expression of results
6 Atmospheric humidity
6.1 Sources of data
6.2 Relationships between temperature and humidity parameters
6.3 Calculation of monthly mean
6.4 Expression of results
7 Wind speed and direction
7.1 Methods of measurement
7.2 Environmental influence on mean wind speed
7.3 Statistical elements
7.4 Expression of results
8 Precipitation
8.1 Sources of data
8.2 Calculation of monthly total
8.3 Expression of results
9 Solar radiation
9.1 Sources of data
9.2 Calculation of monthly total solar irradiation
9.3 Expression of results
9.4 Estimating irradiances that are not measured
10 Longwave radiation
10.1 General
10.2 Sources of data
10.3 Calculation of monthly total longwave irradiation
from the atmosphere (sky)
10.4 Expression of results
Annex A (informative) Methods for splitting global solar
irradiance into the direct and diffuse parts
Annex B (informative) Methods for estimating the longwave
atmospheric irradiances (longwave sky irradiances)
and the sky temperature
Bibliography
ISO 15927-1:2003 specifies procedures for calculating and presenting the monthly means of those parameters of climatic data needed to assess some aspects of the thermal and moisture performance of buildings. Numerical values for any locations should be obtained from the meteorological service in the relevant country.ISO 15927-1:2003 covers the following single climate variables: air temperature; atmospheric humidity; wind speed; precipitation; solar radiation; longwave radiation.Meteorological instrumentation and methods of observation are not covered; these are specified by the World Meteorological Organisation (WMO).
| Committee |
CEN/TC 89
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NS EN ISO 15927-1 : 1ED 2004 | Identical |
| NEN EN ISO 15927-1 : 2003 | Identical |
| NF EN ISO 15927-1 : 2004 | Identical |
| UNE-EN ISO 15927-1:2006 | Identical |
| SN EN ISO 15927-1 : 2003 | Identical |
| BS EN ISO 15927-1:2003 | Identical |
| UNI EN ISO 15927-1 : 2004 | Identical |
| NBN EN ISO 15927-1 : 2004 | Identical |
| I.S. EN ISO 15927-1:2003 | Identical |
| PN EN ISO 15927-1 : 2005 | Identical |
| ISO 15927-1:2003 | Identical |
| DIN EN ISO 15927-1:2004-02 | Identical |
| UNI EN 15316-4-7 : 2009 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
| CEN/TR 16798-8:2017 | Energy performance of buildings - Ventilation for buildings - Part 8: Interpretation of the requirements in EN 16798-7 - Calculation methods for the determination of air flow rates in buildings including infiltration - (Module M5-5) |
| BS EN 15316-4-7:2008 | Heating systems in buildings. Method for calculation of system energy requirements and system efficiencies Space heating generation systems, biomass combustion systems |
| VDI 4710 Blatt 4:2015-09 | Meteorological data for the building services - t,x correlations and wind statistics for 122 European cities |
| VDI 4710 Blatt 1:2013-03 | Meteorological data for building-services purposes - Non-European climatic data |
| PD CEN/TR 16798-8:2017 | Energy performance of buildings. Ventilation for buildings Interpretation of the requirements in EN 16798-7. Calculation methods for the determination of air flow rates in buildings including infiltration. (Module M5-5) |
| 05/30134647 DC : DRAFT JUN 2005 | EN 15255 - THERMAL PERFORMANCE OF BUILDINGS - SENSIBLE ROOM COOLING LOAD CALCULATION - GENERAL CRITERIA AND VALIDATION PROCEDURES |
| I.S. EN 16798-7:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 7: CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION (MODULES M5-5) |
| S.R. CEN/TR 16798-8:2017 | ENERGY PERFORMANCE OF BUILDINGS - VENTILATION FOR BUILDINGS - PART 8: INTERPRETATION OF THE REQUIREMENTS IN EN 16798-7 - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION - (MODULE M5-5) |
| CEN/TR 15615:2008 | Explanation of the general relationship between various European standards and the Energy Performance of Buildings Directive (EPBD) - Umbrella Document |
| I.S. EN 15316-4-7:2008 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
| I.S. EN 15242:2007 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| BS EN 15378:2007 | Heating systems in buildings. Inspection of boilers and heating systems |
| EN 15242:2007 | Ventilation for buildings - Calculation methods for the determination of air flow rates in buildings including infiltration |
| UNI EN 15242 : 2008 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| DIN EN 15242:2007-09 | VENTILATION FOR BUILDINGS - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| BS EN 15242:2007 | Ventilation for buildings. Calculation methods for the determination of air flow rates in buildings including infiltration |
| EN 15378:2007 | Heating systems in buildings - Inspection of boilers and heating systems |
| EN 15316-4-7:2008 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
| EN 16798-7:2017 | Energy performance of buildings - Ventilation for buildings - Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) |
| DIN EN 15316-4-7:2009-02 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF SYSTEM ENERGY REQUIREMENTS AND SYSTEM EFFICIENCIES - PART 4-7: SPACE HEATING GENERATION SYSTEMS, BIOMASS COMBUSTION SYSTEMS |
| BS EN 16798-7:2017 | Energy performance of buildings. Ventilation for buildings Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) |
| I.S. EN 15378:2007 | HEATING SYSTEMS IN BUILDINGS - INSPECTION OF BOILERS AND HEATING SYSTEMS |
| PD CEN/TR 15615:2008 | Explanation of the general relationship between various CEN standards and the Energy Performance of Buildings Directive (EPBD). Umbrella document |
| 15/30297495 DC : 0 | BS EN 16798-7 - ENERGY PERFORMANCE OF BUILDINGS - PART 7: VENTILATION FOR BUILDINGS - MODULES M5-1, M5-5, M5-6, M5-8 - CALCULATION METHODS FOR THE DETERMINATION OF AIR FLOW RATES IN BUILDINGS INCLUDING INFILTRATION |
| UNE-EN 15316-4-7:2010 | Heating systems in buildings - Method for calculation of system energy requirements and system efficiencies - Part 4-7: Space heating generation systems, biomass combustion systems |
| VDI 3789 Blatt 2:1994-10 | Environmental meteorology - Interactions between atmosphere and surfaces - Calculation of short-wave and long-wave radiation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.