EN 894-2:1997+A1:2008
Current
Current
The latest, up-to-date edition.
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
Published date
29-10-2008
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Visual displays
4.1 Requirements for detection of visual displays
4.1.1 Positioning the display
4.1.2 Functional relationships between the
display and the operator
4.1.3 Environmental factors
4.1.4 Other conditions to observe for facilitating
signal detection
4.2 Requirements for identification of visual displays
4.2.1 Symbols used for displays
4.2.2 Digital displays
4.2.3 Analogue displays
4.2.4 Choice of scales for analogue displays
4.2.5 Choice of displays in relation to different
types of tasks
4.2.6 Grouping displays
4.3 Requirements for interpretation of visual displays
5 Auditory displays
5.1 Requirements for detection of auditory displays
5.2 Requirements for identification of auditory displays
5.3 Requirements for interpretation of auditory displays
6 Tactile displays
6.1 Requirements for detection of tactile displays
6.2 Requirements for identification of tactile displays
6.3 Requirements for interpretation of tactile displays
Annex A (informative) - Shape of digits
Annex ZA (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive 98/37/EC,
amended by 98/79/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard gives guidance on the selection, design and location of displays to avoid potential ergonomic hazards associated with their use. It specifies ergonomics requirements and covers visual, audible and tactile displays.It applies to displays used in machinery (e.g. devices and installations, control panels, operating and monitoring consoles) for occupational and private use. Specific ergonomics requirements for visual display terminals (VDTs) used for office tasks are given in the standard EN ISO 9241.
| Committee |
CEN/TC 122
|
| DevelopmentNote |
1997 Edition Re-Issued in October 2008 & incorporates AMD 1 2008. (11/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| AS/NZS 4024:2019 Series | Identical |
| AS/NZS 4024.1902:2014 | Identical |
| NBN EN 894-2 : 1997 + A1 2009 | Identical |
| NS EN 894-2 : 1997 + A1 2008 | Identical |
| BS EN 894-2 : 1997 | Identical |
| PN EN 894-2 : 2002 + A1 2010 | Identical |
| DIN EN 894-2:2009-02 | Identical |
| NEN EN 894-2 : 1997 + A1 2008 | Identical |
| I.S. EN 894-2:1997 | Identical |
| NF EN 894-2 : 1997 + A1 2008 | Identical |
| SN EN 894-2+A1:2009 | Identical |
| UNI EN 894-2 : 2009 | Identical |
| UNE-EN 894-2:1997 | Identical |
| UNE-EN 894-2:1997+A1:2009 | Identical |
| BS EN 894-2:1997+A1:2008 | Identical |
| UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| 11/30254129 DC : 0 | BS EN 12547 - CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| BS EN 691-1:2012 | Safety of woodworking machines Common requirements |
| BS EN 16564:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| DIN EN 15571:2015-03 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| BS EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements Front loaded refuse collection vehicles |
| 09/30206358 DC : DRAFT SEP 2009 | BS EN 1870-4 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTI-BLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| 08/30178378 DC : 0 | BS EN 1218-3:2001/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| 12/30244749 DC : 0 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 12415:2000 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| I.S. CLC/TS 50459-1:2005 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 1: ERGONOMIC PRINCIPLES FOR THE PRESENTATION OF ERTMS/ETCS/GSM-R INFORMATION |
| S.R. CEN TR 614-3:2010 | SAFETY OF MACHINERY - PART 3: ERGONOMIC PRINCIPLES FOR THE DESIGN OF MOBILE MACHINERY |
| I.S. EN 691-1:2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 14886:2008 | Plastics and rubber machines. Bandknife cutting machines for block foams. Safety requirements |
| 03/119040 DC : DRAFT NOV 2003 | PREN 1010-1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| 03/300531 DC : DRAFT FEB 2003 | EN 614-1 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
| 12/30253910 DC : DRAFT JULY 2012 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - LOG SAWING MACHINES |
| 00/707535 DC : DRAFT APR 2000 | PREN 13885:2000 - FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 12/30243081 DC : 0 | BS EN 1034-17 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| UNE-EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| I.S. EN 1672-1:2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| PREN 1870-3 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| DIN EN 16564:2015-04 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| 03/306594 DC : DRAFT APR 2003 | BS EN 14681 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACE |
| 14/30258503 DC : 0 | BS EN 14033-3 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 415-10:2014-07 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| UNE-EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN 13128:2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN ISO 11064-5:2008-10 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 5: DISPLAYS AND CONTROLS |
| I.S. EN 14070:2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| 11/30237569 DC : 0 | BS EN 1870-19 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| 09/30178325 DC : DRAFT FEB 2009 | BS EN 1870-5:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| 00/706811 DC : DRAFT MAR 2000 | BS EN 13870 - FOOD PROCESSING MACHINERY - CHOP CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30130669 DC : DRAFT MAR 2005 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 894-4:2010-11 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| 02/561276 DC : DRAFT MAR 2002 | BS 1005-4 - SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| 12/30244743 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CEI CLC/TS 50459-5 : 2006 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 5: SYMBOLS |
| 09/30197984 DC : 0 | BS EN 1807-2 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| 12/30243084 DC : 0 | BS EN 1034-21 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| 13/30276226 DC : 0 | BS EN 16564 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| 10/30185766 DC : 0 | BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| DD CLC/TS 50459-6:2005 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Audible information |
| 04/30126149 DC : 0 | EN 528 - RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY |
| DIN EN 1807-1:2013-06 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| PREN 15572 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| PREN 15163 : DRAFT 2014 | MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| I.S. EN 415-10:2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| I.S. EN ISO 18217:2015 | SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED BY CHAIN(S) (ISO 18217:2015) |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| PREN 1870-12 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 1807-2:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| I.S. EN 16564:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR BRIDGE TYPE SAWING/MILLING MACHINES, INCLUDED NUMERICAL CONTROL (NC/CNC) VERSIONS |
| I.S. EN 13000:2010 | Cranes - Mobile cranes |
| I.S. EN 15571:2014 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 1034-26:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
| UNE-EN 14985:2012 | Cranes - Slewing jib cranes |
| S.R. CLC/TS 50459-1:2015 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 1: GENERAL PRINCIPLES FOR THE PRESENTATION OF ERTMS/ETCS/GSM-R INFORMATION |
| UNI EN 15180 : 2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1034-17:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| I.S. EN 1501-3:2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| UNE-EN ISO 19085-1:2018 | Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017) |
| UNI EN 1034-27 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
| UNI EN 1034-21 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 14033-3:2017 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 415-7:2009-12 | Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008) |
| DIN EN 415-5:2010-04 | Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009) |
| DIN EN 1870-7:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| DIN EN 1870-12:2014-03 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
| DIN EN 12653:2010-06 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements (includes Amendment A2:2009) |
| DIN EN 1870-16:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| DIN EN 13675:2010-10 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment (includes Amendment A1:2010) |
| DIN EN 1870-9:2013-01 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 13570:2011-02 | Food processing machinery - Mixing machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 1870-3:2015-02 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| BS EN 12203 : 2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 861:2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| BS EN 14466 : 2005 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| BS EN 13457 : 2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| BS EN 710 : 1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| UNE-EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| BS EN 894-3 : 2000 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| BS EN 13731:2007 | Lifting bag systems for fire and rescue service use. Safety and peformance requirements |
| BS EN 12855 : 2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 13128 : 2001 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| BS EN 1005-4 : 2005 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| BS EN 859 : 2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| UNE-EN 1870-7:2013 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| BS EN 12321 : 2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| BS EN 13000 : 2010 | CRANES - MOBILE CRANES |
| BS EN 1870-9:2012 | Safety of woodworking machines. Circular sawing machines Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| BS EN 1870-15:2012 | Safety of woodworking machines. Circular sawing machines Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| BS EN 12622 : 2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| BS EN 614-1 : 2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS EN 528:2008 | Rail dependent storage and retrieval equipment. Safety requirements |
| BS EN 1035:1999 | Tannery machines. Moving platen machinery. Safety requirements |
| BS EN 1870-10:2013 | Safety of woodworking machines. Circular sawing machines Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| BS EN 1034-1 : 2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1 - COMMON REQUIREMENTS |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS EN 415-6:2013 | Safety of packaging machines Pallet wrapping machines |
| EN 13870:2015 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| I.S. EN 13871:2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1218-5 : 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| I.S. EN 14010:2004 | |
| EN 528:2008 | Rail dependent storage and retrieval equipment - Safety requirements |
| EN 12463:2014 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| I.S. EN 1870-16:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| I.S. EN 13570:2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12921-1:2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 15746-2 : 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| EN 12203:2003+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| EN 1034-17:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| DIN EN 14070:2009-07 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| DIN EN 13731:2008-02 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| EN 12044:2005+A1:2009 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| EN 12355:2003+A1:2010 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements |
| EN 12653:1999+A2:2009 | Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety requirements |
| EN 1010-1:2004+A1:2010 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements |
| EN 13020:2015 | Road surface treatment machines - Safety requirements |
| EN 12547:2014 | Centrifuges - Common safety requirements |
| EN 1034-8:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN 1034-6:2005+A1:2009 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
| EN 1501-1:2011+A1:2015 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| EN 1218-3:2001+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines with sliding table for cutting structural timbers |
| EN 1034-21:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines |
| EN 13534:2006+A1:2010 | Food processing machinery - Curing injection machines - Safety and hygiene requirements |
| EN 12717:2001+A1:2009 | Safety of machine tools - Drilling machines |
| EN 12621:2006+A1:2010 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| EN 12267:2003+A1:2010 | Food processing machinery - Circular saw machines - Safety and hygiene requirements |
| EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| EN 12268:2014 | Food processing machinery - Band saw machines - Safety and hygiene requirements |
| UNI EN 12463 : 2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN 1218-1 : 2000 + A1 2009 | SAFETY OF WOOD WORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| EN 12921-1:2005+A1:2010 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements |
| EN 12478:2000/AC:2001 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| EN 12622:2009+A1:2013 | Safety of machine tools - Hydraulic press brakes |
| EN 1218-4:2004+A2:2009 | Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by chain(s) |
| EN 13457:2004+A1:2010 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements |
| UNI EN 1034-1 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| EN 12855:2003+A1:2010 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements |
| EN 1034-26:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines |
| UNI EN 1218-1 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| 15/30302620 DC : 0 | BS EN ISO 19085-4 - WOODWORKING MACHINES - SAFETY - PART 4: VERTICAL PANEL CIRCULAR SAWING MACHINES |
| DIN EN 15949:2012-05 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| DIN EN 1501-3:2010-06 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| 12/30265270 DC : 0 | BS EN 1870-6 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
| BS EN 1034-8:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Refining plants |
| 03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
| 11/30237566 DC : 0 | BS EN 1870-18 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| 11/30247811 DC : 0 | BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| UNE-EN 1870-13:2008 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| BS EN 1870-19:2013 | Safety of woodworking machines. Circular sawing machines Circular saw benches (with and without sliding table) and building site saws |
| I.S. EN 12840:2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| 11/30243078 DC : 0 | BS EN 1034-16 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| UNI EN 1870-19 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| EN 1218-5:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain |
| BS EN 15954-2:2013 | Railway applications. Track. Trailers and associated equipment General safety requirements |
| 12/30260942 DC : 0 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 1672-1 : DRAFT 2012 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 04/30106849 DC : DRAFT MAY 2004 | EN 1870-1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 04/30115780 DC : DRAFT JUN 2004 | ISO 9355-3 - SAFETY OF MACHINERY - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF SIGNALS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| BS EN 1034-16:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Paper and board making machines |
| 13/30291469 DC : 0 | BS EN 13870 - FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DD CLC/TS 50459-3:2005 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Ergonomic arrangements of ERTMS/GSM-R information |
| 11/30237557 DC : 0 | BS EN 1870-11 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DD CLC/TS 50459-5:2005 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Symbols |
| 12/30232434 DC : 0 | BS EN 1870-5:2002+A1:2009 AMD 2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 1807-2:2013-06 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines; German version EN 1807-2:2013 |
| 12/30259421 DC : 0 | BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| BS EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Common safety requirements |
| I.S. EN 12151:2007 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| UNE-EN 691-1:2013 | Safety of woodworking machines - Part 1: Common requirements |
| 04/30117619 DC : DRAFT AUG 2004 | IEC 61310-3 - SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS |
| PREN 1870-11 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| UNI EN 15093 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| PREN 1889-1 : DRAFT 2010 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| 12/30259995 DC : 0 | BS EN 12463 - FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1034-26 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
| 07/30169864 DC : 0 | BS EN 15723 - RAILWAY APPLICATIONS - CLOSING AND LOCKING DEVICES FOR PAYLOAD PROTECTING DEVICES AGAINST ENVIRONMENTAL INFLUENCES - REQUIREMENTS FOR DURABILITY, OPERATION, INDICATION, MAINTENANCE, RECYCLING |
| BS EN 16851:2017 | Cranes. Light crane systems |
| 04/102838 DC : DRAFT JAN 2004 | EN 692 - MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| 11/30244804 DC : 0 | BS EN 940:2009/A1 - SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| 04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
| BS EN 16743:2016 | Food processing machinery. Automatic industrial slicing machines. Safety and hygiene requirements |
| 03/118895 DC : 0 | EN 12622 - SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| DD CLC/TS 50459-4:2005 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Data entry for the ERTMS/ETCS/GSM-R systems |
| 13/30276223 DC : 0 | BS EN 15572 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR EDGE FINISHING MACHINES |
| 09/30183457 DC : 0 | BS EN 13020:2004/A1 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| 02/561267 DC : DRAFT MAR 2002 | PREN 14386 - SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES FOR THE OPERABILITY OF MOBILE MACHINERY |
| 09/30178346 DC : 0 | BS EN 1870-12:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| 04/301783 DC : DRAFT JAN 2004 | EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING MACHINES AND ROUTING MACHINES |
| BS EN 1672-1:2014 | Food processing machinery. Basic concepts Safety requirements |
| CEI CLC/TS 50459-4 : 2006 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 4: DATA ENTRY FOR THE ERTMS/ETCS/GSM-R SYSTEMS |
| 09/30178328 DC : 0 | BS EN 1870-6:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
| PREN 15746-2 : DRAFT 2015 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 00/715016 DC : DRAFT OCT 2000 | PREN 13977 - RAILWAY APPLICATIONS - TRACK - PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| UNI EN ISO 11064-5 : 2009 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 5: DISPLAYS AND CONTROLS |
| CSA C22.2 No. 61010.1 : 2012 : FR | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| PREN 1870-6 : DRAFT 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 15165 : 2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. CLC TS 50459-6:2005 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 6: AUDIBLE INFORMATION |
| DD CLC/TS 50459-1:2005 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information |
| I.S. EN 15746-2:2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN 16186-3:2016 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 3: DESIGN OF DISPLAYS |
| BS EN 15061 : 2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| I.S. EN 15180:2014 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 15955-2:2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 16327:2015 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| UNI EN 15949 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| CEI CLC/TS 50459-6 : 2006 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 6: AUDIBLE INFORMATION |
| S.R. CEN TR 16149:2011 | GUIDANCE DOCUMENT FOR DRAFTING CEN/TC 158 STANDARDS |
| ISO/TR 22100-3:2016 | Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards |
| NF EN 1501-2 : 2005 + A1 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| EN 61010-1:2010 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| I.S. EN ISO 8230-1:2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| DIN EN 1010-1:2011-06 | Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 12267:2011-02 | Food processing machinery - Circular saw machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12321:2009-07 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| DIN EN 12268:2015-01 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 13000:2014-11 | CRANES - MOBILE CRANES |
| DIN EN 1777:2010-06 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| DIN EN 1807:2010-02 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 13128:2009-09 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| DIN EN 12621:2011-07 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1870-14:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| DIN EN 12203:2010-07 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements; German version EN 12203:2003+A1:2009 |
| DIN EN 12463:2015-02 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 12855:2011-02 | Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 12331:2015-12 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| DIN EN 12417:2009-07 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 12581:2011-02 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements (includes Amendment A1:2010) |
| DIN EN 1870-13:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| DIN EN 1870-10:2013-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 1218-1:2010-02 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table (includes Amendment A1:2009) |
| DIN EN 1870-8:2013-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| DIN EN 14010:2009-12 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages (includes Amendment A1:2009) |
| DIN EN 12001:2012-11 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 14681:2010-10 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010) |
| DIN EN 14466:2008-09 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| DIN EN 869:2009-12 | Safety of machinery - Safety requirements for pressure metal diecasting units (includes Amendment A1:2009) |
| DIN EN 693:2011-11 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| DIN EN 12044:2010-03 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements (includes Amendment A1:2009) |
| DIN EN 14656:2010-10 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010) |
| DIN EN 12312-7:2009-08 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIRCRAFT MOVEMENT EQUIPMENT |
| DIN EN 15011:2014-09 | Cranes - Bridge and gantry cranes (includes Amendment A1:2014) |
| BS EN 1501-2 : 2005 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| BS EN 13570 : 2005 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1870-7:2012 | Safety of woodworking machines. Circular sawing machines Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| DIN EN 894-3:2010-01 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008) |
| BS EN 940 : 2009 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| ISO 10472-1:1997 | Safety requirements for industrial laundry machinery Part 1: Common requirements |
| UNE-EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| BS EN 12653 : 2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
| BS EN 15095 : 2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNE-EN 1777:2011 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| BS EN 14673 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| ISO 11064-5:2008 | Ergonomic design of control centres — Part 5: Displays and controls |
| UNE-EN 13020:2016 | Road surface treatment machines - Safety requirements |
| BS EN 13534 : 2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 12547:2015 | Centrifuges - Common safety requirements |
| I.S. EN 1870-8:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 12717:2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 1218-4:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| I.S. EN 12203:2003 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| I.S. EN 869:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| I.S. EN 1864:2008 | INLAND NAVIGATION VESSELS - WHEELHOUSE - ERGONOMIC AND SAFETY REQUIREMENTS |
| I.S. EN 14656:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| EN 15746-2:2010+A1:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| I.S. EN 415-6:2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| I.S. EN 1870-10:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| I.S. EN 12622:2009 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| I.S. EN 12331:2015 | FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1846-2:2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| I.S. EN 13885:2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1218-2:2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| EN 16851:2017 | Cranes - Light crane systems |
| I.S. EN 1870-11:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| I.S. EN 12855:2003 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12267:2003 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1028-1:2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 1218-3:2009-12 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| I.S. EN 1870-12:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 1870-9:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSSCUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 1870-3:2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| DIN EN 1870-1:1999-07 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| I.S. EN 614-1:2006 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| I.S. EN 15095:2007 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| EN 16564:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| I.S. EN 12750:2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| I.S. EN 1034-6:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| I.S. EN 13534:2006 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12044:2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 12629-1:2000 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| I.S. EN 1870-15:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTIBLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 1870-17:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| I.S. EN 12621:2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| DIN EN 1864:2008-06 | Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements |
| I.S. EN ISO 10472-1:2008 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| DIN EN 1807:1999-10 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 1034-1:2010-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (includes Amendment A1:2010) |
| I.S. EN 14681:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| I.S. EN 12355:2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12268:2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1218-5:2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| I.S. EN 1218-3:2002 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| I.S. EN 1034-1:2000 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 1870-14:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| I.S. EN 13675:2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| I.S. EN 13985:2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| I.S. EN 1889-1:2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| I.S. EN 14466:2005 | FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| EN 15011:2011+A1:2014 | Cranes - Bridge and gantry cranes |
| I.S. EN 1777:2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| I.S. EN 12653:2000 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 14710-1:2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| I.S. EN 809:1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| EN 15571:2014 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| I.S. EN 13870:2015 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 1218-1:2000 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| I.S. EN 415-5:2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| I.S. EN 1010-1:2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| I.S. EN 940:2009 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| I.S. EN 12547:2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| I.S. EN 14673:2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| DIN EN 13788:2002-04 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| I.S. EN 1889-2:2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| I.S. EN 12321:2003 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| I.S. EN 1870-5:2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| I.S. EN 12001:2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| DIN EN 1034-6:2010-07 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender (includes Amendment A1:2009) |
| I.S. EN 710:1998 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| DIN EN 1845:2008-06 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| I.S. EN 1845:2007 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1501-1:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| I.S. EN 1870-7:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 13457:2004 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 1501-2:2005 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| I.S. EN 1870-4:2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| I.S. EN 415-7:2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| I.S. EN 13020:2015 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| I.S. EN 894-3:2000 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| I.S. EN 12581:2006 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| I.S. EN 1673:2000 | FOOD PROCESSING MACHINERY - ROTARY RACK OVENS - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 12463:2014 | FOOD PROCESSING MACHINERY - FILLING MACHINES AND AUXILIARY MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| I.S. EN 14985:2012 | CRANES - SLEWING JIB CRANES |
| I.S. EN 528:2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| UNI EN 940 : 2012 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| VDI/VDE 6008 Blatt 3:2014-01 | Barrier-free buildings - Aspects of electrical installation and building automation |
| ONORM EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| VDI/VDE 3699 Blatt 4:2014-01 | Process control using display screens - Curves |
| DIN EN 15954-2:2013-11 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| UNI EN 691-1 : 2012 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| NF EN 894-4 : 2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| UNI EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| PD ISO/TR 22100-3:2016 | Safety of machinery. Relationship with ISO 12100 Implementation of ergonomic principles in safety standards |
| 03/112610 DC : DRAFT AUG 2003 | EN 14710-1 - FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY |
| 11/30237560 DC : 0 | BS EN 1870-12 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| I.S. EN 13788:2002 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| I.S. EN 848-1:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| DIN EN ISO 18217:2015-12 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| 13/30286103 DC : 0 | BS EN 12331 - FOOD PROCESSING MACHINERY - MINCING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 00/562572 DC : DRAFT JUN 2000 | BS EN 13921-6 - PERSONAL PROTECTIVE EQUIPMENT - ERGONOMIC PRINCIPLES - PART 6: SENSORY FACTORS |
| PREN 13871 : DRAFT 2012 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| 16/30339514 DC : 0 | BS EN 17003 - ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
| 09/30201246 DC : 0 | BS EN 710:1997/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT ASSOCIATED EQUIPMENT |
| 09/30175678 DC : 0 | BS EN 14681:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| 10/30232428 DC : DRAFT DEC 2010 | BS EN 1870-16 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| BS EN 1870-18:2013 | Safety of woodworking machines. Circular sawing machines Dimension saws |
| EN 1218-1:1999+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines with sliding table |
| 09/30175681 DC : 0 | BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 1034-17:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Tissue making machines |
| 12/30253907 DC : DRAFT JULY 2012 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - TABLE BAND SAWS AND BAND RE-SAWS |
| BS EN 14033-3 : 2009 | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| DIN EN 15061:2009-05 | Safety of machinery - Safety requirements for strip processing line machinery and equipment (includes Amendment A1:2008) |
| 10/30233212 DC : 0 | BS EN 848-3 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| BS EN 1807-2:2013 | Safety of woodworking machines. Band sawing machines Log sawing machines |
| 10/30232422 DC : DRAFT DEC 2010 | BS EN 1870-9 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| DIN EN 16743:2016-05 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 04/30058509 DC : DRAFT JUNE 2004 | BS EN 14985 - CRANES - SLEWING JIB CRANES |
| 10/30232425 DC : DRAFT DEC 2010 | BS EN 1870-15 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| 10/30232431 DC : DRAFT DEC 2010 | BS EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| 09/30178337 DC : 0 | BS EN 1870-9:2000/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 15094 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| UNI EN ISO 8230-1 : 2009 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 415-8:2008 | Safety of packaging machines Strapping machines |
| 04/30109749 DC : DRAFT JUL 2004 | ISO 9355-4 - ERGONOMIC REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| 05/30133339 DC : DRAFT MAY 2005 | EN 861 - SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| DIN EN 15165:2015-01 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/30130673 DC : DRAFT MAR 2005 | BS EN 15166 - FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 15165:2014 | Food processing machinery. Forming machines. Safety and hygiene requirements |
| BS EN ISO 19085-1:2017 | Woodworking machines. Safety Common requirements |
| 04/30110326 DC : DRAFT APR 2004 | EN 1870-17 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT CIRCULAR SAWING MACHINES WITH ONE SAW UNIT (MANUAL RADIAL ARM SAWS) |
| I.S. EN 15949:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 11/30237563 DC : 0 | BS EN 1870-10 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| DIN EN 15166:2010-02 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
| I.S. EN 16851:2017 | CRANES - LIGHT CRANE SYSTEMS |
| BS EN 1034-21:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Coating machines |
| 09/30202532 DC : 0 | BS EN 15954-2 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 04/30110543 DC : 0 | EN 1845 - FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| DIN EN 15094:2009-04 | Safety of machinery - Safety requirements for cold flat rolling mills |
| DD CLC/TS 50459-2:2005 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Ergonomic arrangements of ERTMS/ETCS information |
| UNI EN 16327 : 2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| UNE-EN 16564:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions |
| BS EN 15094:2008 | Safety of machinery. Safety requirements for cold flat rolling mills |
| 12/30260302 DC : 0 | BS EN 12268 - FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 05/19981967 DC : 0 | BS EN 1034-6 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: PULPERS |
| BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
| 09/30178391 DC : 0 | BS EN 12779:2004/A1 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| 09/30178343 DC : 0 | BS EN 1870-11:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI-AUTOMATIC AND AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| 05/30133297 DC : DRAFT MAY 2005 | EN 859 - SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| CSA C22.2 No. 61010.1 :2012 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| 05/30138432 DC : DRAFT AUG 2005 | BS EN 1501-1 - REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 1: REAR LOADED REFUSE COLLECTION VEHICLES |
| 08/30178382 DC : 0 | BS EN 1218-4:2004/A2 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| 04/301784 DC : DRAFT JAN 2004 | EN 848-2 - SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUNTING MACHINES |
| UNE-EN 1807-1:2013 | Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band re-saws |
| I.S. EN 15093:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| CEI CLC/TR 50459-7 : 2008 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 7: SPECIFIC TRANSMISSION MODULES |
| UNI EN 1034-8 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
| NF EN 15746-2 : 2010 + A1 2011 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 1870-6:2003 | Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading. |
| UNI EN 1807-2 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 2: LOG SAWING MACHINES |
| UNI EN 415-10 : 2014 | SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS |
| ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
| I.S. EN 1034-21:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
| I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| DIN EN 15746-2:2016-02 (Draft) | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements; German and English version prEN 15746-2:2015 |
| PREN 1870-10 : DRAFT 2011 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNE-EN 1870-14:2008 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| UNI EN 1034-16 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| CAN/CSA-C22.2 NO. 61010-1-12 (R2017) | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
| DIN EN 12921-1:2011-02 | Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010) |
| I.S. EN 14886:2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| DIN EN 1870-11:2014-02 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 12750:2013-05 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 1005-4:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| UNI EN 1501-2 : 2010 | REFUSE COLLECTION VEHICLES AND ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| DIN EN ISO 10472-1:2009-10 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| DIN EN 1870-17:2015-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| DIN EN 12622:2014-02 | Safety of machine tools - Hydraulic press brakes (includes Amendment A1:2013) |
| DIN EN 12547:2014-12 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| DIN EN 1870-15:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| DIN EN 12355:2011-02 | Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13020:2016-02 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| DIN EN 12717:2009-07 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| DIN EN 848-3:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 13736:2009-11 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| DIN EN 692:2009-10 | Machine tools - Mechanical presses - Safety (includes Amendment A1:2009) |
| DIN EN 848-1:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| DIN EN 13870:2015-12 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| DIN EN 12629-1:2011-01 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements (includes Amendment A1:2010) |
| DIN EN 848-2:2013-01 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| UNE-EN 710:1998 | SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT. |
| DIN EN 13885:2011-02 | Food processing machinery - Clipping machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 13985:2009-11 | Machine tools - Safety - Guillotine shears (includes Amendment A1:2009) |
| DIN EN 14673:2010-10 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010) |
| UNE-EN 15954-2:2014 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| BS EN 12629-1 : 2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| BS EN 12478:2001 | Safety of machine tools. Large numerically controlled turning machines and turning centres |
| BS EN 1218-2 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| BS EN 13898 : 2003 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| UNE-EN 1889-1:2012 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| BS EN 12355 : 2003 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNE-EN 12331:2016 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| UNE-EN 15955-2:2014 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| BS EN 861 : 2007 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| UNE-EN 1870-8:2013 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| BS EN 848-2 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| DIN EN 1889-1:2011-10 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| BS EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar. Safety requirements |
| BS EN 809 : 1998 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 848-1:2008 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: Single spindle vertical moulding machines |
| UNE-EN 61010-1:2011 | Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements |
| I.S. EN 1005-4:2005 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| EN 809 : 1998 COR 2010 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| ISA 61010-1 : 2008 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| EN 809:1998+A1:2009 | Pumps and pump units for liquids - Common safety requirements |
| UNE-EN 848-3:2013 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN 12312-7:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equipment |
| I.S. EN 12312-7:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT |
| UNE-EN 693:2001 | Machine tools - Safety - Hydraulic presses |
| I.S. EN 848-2:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| EN 13985:2003+A1:2009 | Machine tools - Safety - Guillotine shears |
| EN 1870-15:2012 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| EN 15095:2007+A1:2008 | Power-operated mobile racking and shelving, carousels and storage lifts - Safety requirements |
| UNI EN 12921-1 : 2010 | MACHINES FOR SURFACE CLEANING AND PRE- TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| UNI EN 12001 : 2012 | CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| UNI EN 1870-13 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| UNI EN 1005-4 : 2009 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| UNI EN 12581 : 2010 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| UNI EN 1870-8 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1010-1 : 2011 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| UNI EN 14710-1 : 2009 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 1889-1 : 2011 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES |
| UNI EN 1846-2 : 2013 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| UNI EN 809 : 2009 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNI EN 12203 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SHOE AND LEATHER PRESSES - SAFETY REQUIREMENTS |
| UNI EN 15095 : 2009 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| UNI EN 1870-15 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 15: MULTI-BLADE CROSS-CUT SAWING MACHINES WITH INTEGRATED FEED OF THE WORKPIECE AND MANUAL LOADING AND/OR UNLOADING |
| UNI EN 614-1 : 2009 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| UNI EN 13736 : 2009 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| UNI EN 15954-2 : 2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 848-3 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 12750 : 2013 | SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| UNI EN 692 : 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| UNI EN 1864 : 2008 | INLAND NAVIGATION VESSELS - WHEELHOUSE - ERGONOMIC AND SAFETY REQUIREMENTS |
| UNI EN 14673 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS |
| UNI EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 1870-16 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V CUTTING |
| UNI EN 1845 : 2008 | FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 860 : 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANNING MACHINES |
| UNI EN 415-6 : 2013 | SAFETY OF PACKAGING MACHINES - PART 6: PALLET WRAPPING MACHINES |
| UNI EN 1028-1 : 2008 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| UNI EN 13871 : 2014 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13457 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12267 : 2010 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12855 : 2010 | FOOD PROCESSING MACHINERY - ROTATING BOWL CUTTERS - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12653 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER MANUFACTURING MACHINES - NAILING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 12417 : 2009 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| UNI EN 14466 : 2008 | FIRE-FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| UNI EN 859 : 2012 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| UNI EN 1218-4 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| UNI EN 848-1 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| UNI EN 12629-1 : 2010 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FROM CONCRETE AND CALCIUM-SILICATE - SAFETY - PART 1: COMMON REQUIREMENTS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN 12547 : 2014 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| EN 1870-11:2013 | Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
| UNI EN 710 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR FOUNDRY MOULDING AND COREMAKING MACHINERY AND PLANT AND ASSOCIATED EQUIPMENT |
| UNI EN 1870-9 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 9: DOUBLE BLADE CIRCULAR SAWING MACHINES FOR CROSS-CUTTING WITH INTEGRATED FEED AND WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1034-6 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| UNI EN 1870-12 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 12: PENDULUM CROSS-CUT SAWING MACHINES |
| UNI EN 14656 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| UNI EN 415-5 : 2010 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| UNI EN 14985 : 2012 | CRANES - SLEWING JIB CRANES |
| UNI EN 1870-14 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| UNI EN 13885 : 2010 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13534 : 2010 | FOOD PROCESSING MACHINERY - CURING INJECTION MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13898 : 2009 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 1034-27:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
| UNI EN 1870-10 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNI EN 1870-11 : 2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 11: SEMI AUTOMATIC HORIZONTAL CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| EN 894-4:2010 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators |
| EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNI EN 1870-4 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| UNI EN 1870-1 : 2009 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| UNI EN 12321 : 2009 | UNDERGROUND MINING MACHINERY - SPECIFICATION FOR THE SAFETY REQUIREMENTS OF ARMOURED FACE CONVEYORS |
| UNI EN 13000 : 2014 | CRANES - MOBILE CRANES |
| UNI EN 894-3 : 2009 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 3: CONTROL ACTUATORS |
| UNI EN 848-2 : 2013 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| ONORM EN 15061 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| UNI EN 1777 : 2010 | HYDRAULIC PLATFORMS (HPS) FOR FIRE FIGHTING AND RESCUE SERVICES - SAFETY REQUIREMENTS AND TESTING |
| UNI EN 869 : 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| UNI EN 12044 : 2010 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| UNI EN 1889-2 : 2009 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| UNI EN 14070 : 2009 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNI EN ISO 10472-1 : 2009 | SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS |
| UNI EN 15955-2 : 2013 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 693 : 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| UNI EN 13985 : 2009 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNI EN 861 : 2012 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| UNI EN 14010 : 2009 | SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES |
| UNI EN 13128 : 2009 | SAFETY OF MACHINE TOOLS - MILLING MACHINES (INCLUDING BORING MACHINES) |
| UNI EN 14886 : 2008 | PLASTICS AND RUBBER MACHINES - BANDKNIFE CUTTING MACHINES FOR BLOCK FOAMS - SAFETY REQUIREMENTS |
| UNI EN 1807 : 2010 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| UNI EN 12268 : 2014 | FOOD PROCESSING MACHINERY - BAND SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 12621 : 2010 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| UNI EN 12717 : 2009 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNI EN 12355 : 2010 | FOOD PROCESSING MACHINERY - DERINDING-, SKINNING- AND MEMBRANE REMOVAL MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 13570 : 2010 | FOOD PROCESSING MACHINERY - MIXING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 415-7 : 2008 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| UNI EN 1218-3 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| UNI EN 1870-5 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| UNI EN 13675 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| UNI EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| UNI EN 12622 : 2014 | SAFETY OF MACHINE TOOLS - HYDRAULIC PRESS BRAKES |
| UNI EN 14681 : 2010 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| UNI EN 1807-1 : 2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| DIN EN 1034-16:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| 14/30293313 DC : 0 | BS EN ISO 19085-2 - WOODWORKING MACHINES - SAFETY - PART 2: HORIZONTAL BEAM PANEL CIRCULAR SAWING MACHINES |
| 15/30296047 DC : 0 | BS EN 16851 - CRANES - LIGHT CRANE SYSTEMS |
| BS EN 15571:2014 | Machines and plants for mining and tooling of natural stone. Safety. Requirements for surface finishing machines |
| S.R. CLC/TS 50459-2:2015 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 2: ERGONOMIC ARRANGEMENTS OF GSM-R INFORMATION |
| PD CLC/TS 50459-3:2016 | Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface Ergonomic arrangements of non ETCS information |
| PD CLC/TR 50459-7:2007 | Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface Specific transmission modules |
| BS EN 15093:2008 | Safety of machinery. Safety requirements for hot flat rolling mills |
| 14/30293469 DC : 0 | BS EN 16710 - ERGONOMICS - A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN |
| 08/30178810 DC : DRAFT MAY 2008 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| BS EN 15949:2012 | Safety of machinery. Safety requirements for bar mills, structural steel mills and wire rod mills |
| 00/107021 DC : DRAFT OCT 2000 | BS EN 1501-2 - REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 2: SIDE LOADED REFUSE COLLECTION VEHICLES |
| CLC/TS 50459-3:2016 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 3: Ergonomic arrangements of non ETCS information |
| I.S. CLC/TS 50459-2:2005 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 2: ERGONOMIC ARRANGEMENTS OF ERTMS/ETCS INFORMATION |
| 04/19985587 DC : 0 | BS EN 894-4 - SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| 10/30227080 DC : DRAFT JUNE 2010 | BS EN 691-1 - SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| 08/30182786 DC : DRAFT JULY 2008 | BS EN 13977 - RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE |
| DIN EN 1870-19:2014-03 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| 09/30198762 DC : 0 | BS EN 1807-1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| I.S. EN 848-3:2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| UNI EN 1501-5 : 2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| UNI EN 1034-17 : 2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 17: TISSUE MAKING MACHINES |
| 14/30297842 DC : 0 | BS EN 15163 - MACHINES AND INSTALLATIONS FOR THE EXPLOITATION AND PROCESSING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR DIAMOND WIRE SAWS AND DIAMOND MULTI-WIRE SAWS |
| 16/30318928 DC : 0 | BS EN ISO 19085-7 - WOODWORKING MACHINES - SAFETY - PART 7: SURFACE PLANING THICKNESS PLANING COMBINED SURFACE/THICKNESS PLANING MACHINES |
| 13/30276220 DC : 0 | BS EN 15571 - MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| I.S. EN 692:2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| PD CLC/TS 50459-2:2015 | Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface Ergonomic arrangements of GSM-R information |
| PD CLC/TS 50459-1:2015 | Railway applications. Communication, signalling and processing systems. European Rail Traffic Management System. Driver-Machine Interface General principles for the presentation of ERTMS/ETCS/GSM-R information |
| PREN 848-3 : DRAFT 2010 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOLS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES |
| DIN EN 15180:2015-01 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| 07/30166811 DC : 0 | BS EN ISO 23125 - SAFETY OF MACHINE TOOLS - TURNING MACHINES |
| DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| 10/30211872 DC : 0 | BS EN 12001 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| EN 1218-2:2004+A1:2009 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains |
| I.S. EN 12478:2000 | SAFETY OF MACHINE TOOLS - LARGE NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| 12/30263881 DC : 0 | BS EN 1870-3 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 3: DOWN CUTTING CROSS-CUT SAWS AND DUAL PURPOSE DOWN CUTTING CROSS-CUT SAWS/CIRCULAR SAW BENCHES |
| 09/30180832 DC : DRAFT AUG 2009 | BS EN 13675 AMD1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND FINISHING LINE EQUIPMENT |
| 12/30241465 DC : 0 | BS EN 16186-3 - RAILWAY APPLICATIONS - DRIVER'S CAB - PART 3: DESIGN OF DISPLAYS |
| I.S. EN 16743:2016 | FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 614-1 : DRAFT 2003 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
| 08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 1870-6:2017 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIRE WOOD |
| 14/30263884 DC : 0 | BS EN ISO 16093 - MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| 09/30179758 DC : 0 | BS EN 12044:2005/A1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| EN 1034-1:2000+A1:2010 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements |
| BS EN 415-10:2014 | Safety of packaging machines General Requirements |
| BS EN ISO 11064-5:2008 | Ergonomic design of control centres Displays and controls |
| UNI EN 1501-3 : 2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| 16/30335973 DC : 0 | BS ISO 19085-9 - WOODWORKING MACHINES - SAFETY - PART 9: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) |
| PREN 13870 : DRAFT 2013 | FOOD PROCESSING MACHINERY - PORTION CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 15093:2009-06 | Safety of machinery - Safety requirements for hot flat rolling mills |
| 14/30293310 DC : 0 | BS EN ISO 19085-1 - WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS |
| 14/30297793 DC : 0 | BS EN ISO 19085-3 - WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NC BORING AND ROUTING MACHINES |
| DIN EN 1870-18:2013-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| BS EN 1807-1:2013 | Safety of woodworking machines. Band sawing machines Table band saws and band re-saws |
| 00/706812 DC : DRAFT MAR 2000 | BS EN 13871 - FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 09/30178331 DC : DRAFT FEB 2009 | BS EN 1870-7:2002/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 7: SINGLE BLADE LOG SAWING MACHINES WITH INTEGRATED FEED TABLE AND MANUAL LOADING AND/OR UNLOADING |
| BS EN 16327:2014 | Fire-fighting. Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| PREN 15180 : DRAFT 2011 | FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| EN 13000:2010+A1:2014 | Cranes - Mobile cranes |
| CLC/TS 50459-4:2005 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 4: Data entry for the ERTMS/ETCS/GSM-R systems |
| 08/30185056 DC : DRAFT SEP 2008 | BS EN 15861 - FOOD PROCESSING MACHINERY - SMOKE FACILITIES - SAFETY AND HYGIENE REQUIREMENTS |
| 04/30126179 DC : DRAFT DEC 2004 | EN 15095 - POWER-OPERATED MOBILE RACKING AND SHELVING, CARROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| DIN EN 1034-17:2012-11 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines |
| PD CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| 12/30260299 DC : 0 | BS EN 15165 - FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| 09/30179779 DC : 0 | BS EN 13457 AMD1 - FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - SPLITTING, SKIVING, CUTTING, CEMENTING AND CEMENT DRYING MACHINES - SAFETY REQUIREMENTS |
| BS EN 15955-2:2013 | Railway applications. Track. Demountable machines and associated equipment General safety requirements |
| BS EN 1034-27:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll handling systems |
| 04/30086349 DC : DRAFT APR 2004 | EN ISO 13849-1 - SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| UNI EN 1870-18 : 2014 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| 09/30178322 DC : DRAFT JAN 2009 | BS EN 1870-4 AMD1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| 09/30178353 DC : 0 | BS EN 1870-16:2005/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 16: DOUBLE MITRE SAWING MACHINES FOR V-CUTTING |
| UNE-EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| I.S. EN 1034-16:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 16: PAPER AND BOARD MAKING MACHINES |
| DIN EN ISO 8230-1:2009-05 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| DIN EN 1034-26:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 26: ROLL PACKAGING MACHINES |
| I.S. EN 1807-1:2013 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES - PART 1: TABLE BAND SAWS AND BAND RE-SAWS |
| I.S. EN 16186-2:2017 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 2: INTEGRATION OF DISPLAYS, CONTROLS AND INDICATORS |
| UNE-EN 1672-1:2015 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| I.S. EN 16327:2014 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| I.S. EN 1034-27:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
| I.S. EN 15061:2007 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| ISO 16089:2015 | Machine tools Safety Stationary grinding machines |
| I.S. EN ISO 11064-5:2008 | ERGONOMIC DESIGN OF CONTROL CENTRES - PART 5: DISPLAYS AND CONTROLS |
| I.S. EN 894-4:2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| I.S. EN 1870-19:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 19: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND BUILDING SITE SAWS |
| I.S. EN 15094:2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| I.S. EN 15954-2:2013 | RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| CLC/TR 50459-7:2007 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine interface - Part 7: Specific Transmission Modules |
| CLC/TS 50459-2:2015 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 2: Ergonomic arrangements of GSM-R information |
| PREN 17003 : DRAFT 2016 | ROAD VEHICLES - ROLLER BRAKE TESTERS FOR VEHICLES OF MORE THAN 3,5 TONS GVW - SAFETY REQUIREMENTS |
| PREN 12547 : DRAFT 2011 | CENTRIFUGES - COMMON SAFETY REQUIREMENTS |
| I.S. EN 15165:2014 | FOOD PROCESSING MACHINERY - FORMING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| PREN 13020 : DRAFT 2014 | ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| I.S. CLC TS 50459-4:2005 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 4: DATA ENTRY FOR THE ERTMS/ETCS/GSM-R SYSTEMS |
| ISO 7076-5:2014 | Fire protection Foam fire extinguishing systems Part 5: Fixed compressed air foam equipment |
| I.S. EN 15011:2011 | CRANES - BRIDGE AND GANTRY CRANES |
| DIN EN 14985:2012-05 | Cranes - Slewing jib cranes |
| I.S. EN 15166:2008 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 809:2012-10 | Pumps and pump units for liquids - Common safety requirements |
| DIN EN 710:2010-10 | Safety of machinery - Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment (includes Amendment A1:2010) |
| DIN EN 940:2012-05 | SAFETY OF WOODWORKING MACHINES - COMBINED WOODWORKING MACHINES |
| DIN EN 861:2012-09 | SAFETY OF WOODWORKING MACHINES - SURFACE PLANING AND THICKNESSING MACHINES |
| DIN EN 528:2009-02 | Rail dependent storage and retrieval equipment - Safety requirements |
| DIN EN 859:2012-09 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANING MACHINES |
| DIN EN 1870-1:2009-08 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| DIN EN 860:2012-09 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| BS EN 415-5 : 2006 | SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES |
| BS EN 12547:2014 | Centrifuges. Common safety requirements |
| BS EN 13885 : 2005 | FOOD PROCESSING MACHINERY - CLIPPING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1870-12:2013 | Safety of woodworking machines. Circular sawing machines Pendulum cross-cut sawing machines |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| BS EN 1028-1 : 2002 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| UNE-EN 12621:2006 | Machinery for the supply and circulation of coating materials under pressure - Safety requirements |
| BS EN 13675 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR TUBE FORMING AND ROLLING MILLS AND THEIR FINISHING LINE EQUIPMENT |
| BS EN 1010-1 : 2004 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 1: COMMON REQUIREMENTS |
| BS EN 848-1 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES |
| BS EN 1218-3 : 2001 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 3: HAND FED TENONING MACHINES WITH SLIDING TABLE FOR CUTTING STRUCTURAL TIMBERS |
| BS EN 13871:2014 | Food processing machinery. Cubes cutting machinery. Safety and hygiene requirements |
| BS EN 12267 : 2003 | FOOD PROCESSING MACHINERY - CIRCULAR SAW MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 12268:2014 | Food processing machinery. Band saw machines. Safety and hygiene requirements |
| BS EN 869 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR PRESSURE METAL DIECASTING UNITS |
| BS EN 1889-2 : 2003 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 12417 : 2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| IEC TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children |
| BS EN 12840:2001 | Safety of machine tools. Manually controlled turning machines with or without automatic control |
| BS EN 1870-1 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 17/30357380 DC : 0 | BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES |
| BS EN 13736 : 2003 | SAFETY OF MACHINE TOOLS - PNEUMATIC PRESSES |
| BS EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing |
| BS EN 1218-4 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 4: EDGE BANDING MACHINES FED BY CHAIN(S) |
| BS EN 12621 : 2006 | MACHINERY FOR THE SUPPLY AND CIRCULATION OF COATING MATERIALS UNDER PRESSURE - SAFETY REQUIREMENTS |
| BS EN 14710-1 : 2005 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITHOUT PRIMER - PART 1: CLASSIFICATION, GENERAL AND SAFETY REQUIREMENTS |
| BS EN 1034-6 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 6: CALENDER |
| UNE-EN 12001:2013 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
| BS EN 12717 : 2001 | SAFETY OF MACHINE TOOLS - DRILLING MACHINES |
| UNE-EN 1870-15:2013 | Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading |
| UNE-EN 12622:2011 | Safety of machine tools - Hydraulic press brakes |
| BS EN 1807 : 1999 | SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| BS EN 14985:2012 | Cranes. Slewing jib cranes |
| BS EN 13985 : 2003 | MACHINE TOOLS - SAFETY - GUILLOTINE SHEARS |
| UNE-EN 415-6:2014 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| BS EN 415-7 : 2006 | SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES |
| BS EN 1870-3:2014 | Safety of woodworking machines. Circular sawing machines Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| UNE-EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| BS EN 1218-5 : 2004 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FEED CHAIN |
| BS EN 12750:2013 | Safety of woodworking machines. Four sided moulding machines |
| BS EN 1870-11:2013 | Safety of woodworking machines. Circular sawing machines Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) |
| BS EN 693 : 2001 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| UNE-EN 1846-2:2011 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| BS EN 1870-4:2012 | Safety of woodworking machines. Circular sawing machines Multiblade rip sawing machines with manual loading and/or unloading |
| BS EN 12331:2015 | Food processing machinery. Mincing machines. Safety and hygiene requirements |
| ISO 18217:2015 | Safety of woodworking machines Edge-banding machines fed by chain(s) |
| BS EN 14070 : 2003 | SAFETY OF MACHINE TOOLS - TRANSFER AND SPECIAL-PURPOSE MACHINES |
| UNE-EN 860:2007 | Safety of woodworking machines - One side thickness planing machines |
| BS EN 14010 : 2003 | |
| BS EN 12415:2001 | Safety of machine tools. Small numerically controlled turning machines and turning centres |
| BS EN 12044 : 2005 | FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - CUTTING AND PUNCHING MACHINES - SAFETY REQUIREMENTS |
| BS EN 1870-13 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| BS EN 13788:2002 | Machine tools. Safety. Multi-spindle automatic turning machines |
| BS EN 15011 : 2011 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 13000:2010 | Cranes - Mobile cranes |
| 10/30218104 DC : 0 | BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES |
| UNE-EN 1870-9:2013 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| BS EN 1846-2 : 2009 | FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE |
| BS EN 13870:2015 | Food processing machinery. Portion cutting machines. Safety and hygiene requirements |
| UNE-EN 1870-16:2013 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| UNE-EN 940:2010 | Safety of woodworking machines - Combined woodworking machines |
| UNE-EN 13871:2015 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| UNE-EN 859:2008 | Safety of woodworking machines - Hand fed surface planing machines |
| BS EN 1870-5 : 2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAW BENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| BS EN 860 : 2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| UNE-EN 13870:2016 | Food processing machinery - Portion cutting machines - Safety and hygiene requirements |
| DIN EN 15095:2009-06 | POWER-OPERATED MOBILE RACKING AND SHELVING, CAROUSELS AND STORAGE LIFTS - SAFETY REQUIREMENTS |
| BS EN 1864:2008 | Inland navigation vessels. Wheelhouse. Ergonomic and safety requirements |
| EN 691-1:2012 | Safety of woodworking machines - Part 1: Common requirements |
| EN 13788 : 2001 | MACHINE TOOLS - SAFETY - MULTI-SPINDLE AUTOMATIC TURNING MACHINES |
| EN 13885:2005+A1:2010 | Food processing machinery - Clipping machines - Safety and hygiene requirements |
| EN 692:2005+A1:2009 | Machine tools - Mechanical presses - Safety |
| EN 15955-2:2013 | Railway applications - Track - Demountable machines and associated equipment - Part 2: General safety requirements |
| EN 415-10:2014 | Safety of packaging machines - Part 10: General Requirements |
| EN 15954-2:2013 | Railway applications - Track - Trailers and associated equipment - Part 2: General safety requirements |
| EN 13675:2004+A1:2010 | Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment |
| EN 14466:2005+A1:2008 | Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN 14656:2006+A1:2010 | Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals |
| EN 415-7:2006+A1:2008 | Safety of packaging machines - Part 7: Group and secondary packaging machines |
| EN 415-8:2008 | Safety of packaging machines - Part 8: Strapping machines |
| EN 14985:2012 | Cranes - Slewing jib cranes |
| EN 15094:2008 | Safety of Machinery - Safety requirements for cold flat rolling mills |
| EN 1672-1:2014 | Food processing machinery - Basic concepts - Part 1: Safety requirements |
| EN 15061:2007+A1:2008 | Safety of machinery - Safety requirements for strip processing line machinery and equipment |
| EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) |
| EN 1870-16:2012 | Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting |
| EN 15949:2012 | Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills |
| EN 16186-2:2017 | Railway applications - Driver's cab - Part 2: Integration of displays, controls and indicators |
| EN 12581:2005+A1:2010 | Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating material - Safety requirements |
| EN 1870-13:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines |
| EN 1807:1999+A1:2009 | Safety of woodworking machines - Band sawing machines |
| EN 16710-2:2016 | Ergonomics methods - Part 2: A methodology for work analysis to support design |
| EN 15093:2008 | Safety of Machinery - Safety requirements for hot flat rolling mills |
| EN 15166:2008 | Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements |
| EN 1870-6:2017 | Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood |
| EN ISO 8230 : 1997 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| EN 14681:2006+A1:2010 | Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces |
| EN 1889-1:2011 | Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles |
| EN 1870-3:2014 | Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches |
| EN 869:2006+A1:2009 | Safety of machinery - Safety requirements for pressure metal diecasting units |
| EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| EN 16186-3:2016 | Railway applications - Driver's cab - Part 3: Design of displays |
| EN 1870-14:2007+A2:2012 | Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines |
| EN 1807-2:2013 | Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines |
| EN 14710-1:2005+A2:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classification, general and safety requirements |
| EN 1845:2007 | Footwear manufacturing machines - Footwear moulding machines - Safety requirements |
| EN 1870-1:2007+A1:2009 | Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws |
| EN 1870-5 : 2002 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 5: CIRCULAR SAWBENCHES/UP-CUTTING CROSS-CUT SAWING MACHINES |
| EN 15165:2014 | Food processing machinery - Forming machines - Safety and hygiene requirements |
| EN 1870-7:2012 | Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading |
| EN 13871:2014 | Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements |
| EN 1870-19:2013 | Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws |
| EN 14673:2006+A1:2010 | Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals |
| EN 1864:2008 | Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements |
| EN 693 : 2001 COR 2011 | MACHINE TOOLS - SAFETY - HYDRAULIC PRESSES |
| EN 1870-17:2012+A1:2015 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| EN 14033-3:2017 | Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 859:2007+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| EN 14886:2008 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN 848-2 : 2007 COR 2012 | SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HAND FED/INTEGRATED FED ROUTING MACHINES |
| EN 861:2007+A2:2012 | Safety of woodworking machines - Surface planing and thicknessing machines |
| EN 940:2009+A1:2012 | Safety of woodworking machines - Combined woodworking machines |
| EN 1870-8:2012 | Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| EN 16743:2016 | Food processing machinery - Automatic industrial slicing machines - Safety and hygiene requirements |
| EN 1889-2:2003+A1:2009 | Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives |
| EN 1870-4:2012 | Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading |
| EN 415-6:2013 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| EN 14010:2003+A1:2009 | Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
| EN 16327:2014 | Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS) |
| EN 15180:2014 | Food processing machinery - Food depositors - Safety and hygiene requirements |
| EN 415-5:2006+A1:2009 | Safety of packaging machines - Part 5: Wrapping machines |
| EN 848-3:2012 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines |
| EN ISO 11064-5:2008 | Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) |
| EN 1870-12:2013 | Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines |
| EN 1870-10:2013 | Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines |
| EN 1777:2010 | Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing |
| EN 1846-2:2009+A1:2013 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance |
| EN 1028-1:2002+A1:2008 | Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements |
| EN 13731:2007 | Lifting bag systems for fire and rescue service use - Safety and performance requirements |
| EN 1870-9:2012 | Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading |
| EN 13736:2003+A1:2009 | Safety of machine tools - Pneumatic presses |
| EN ISO 8230-1:2008 | Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) |
| UNI EN 528 : 2009 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| DIN EN 16851 E : 2017 | CRANES - LIGHT CRANE SYSTEMS |
| ISO 19085-1:2017 | Woodworking machines Safety Part 1: Common requirements |
| 09/30178310 DC : DRAFT FEB 2009 | BS EN 1807:1999/A1 - SAFETY OF WOODWORKING MACHINES - BAND SAWING MACHINES |
| DIN EN 1034-21:2012-11 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 21: COATING MACHINES |
| DIN EN 15955-2:2013-09 | RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| DIN EN 691-1:2013-01 | SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS |
| DIN EN 1034-8:2012-06 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
| 07/30158997 DC : 0 | BS EN 13731 - LIFTING BAG SYSTEMS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS |
| DIN EN 1672-1:2014-12 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 07/30172833 DC : DRAFT DEC 2007 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNI EN 894-4 : 2010 | SAFETY OF MACHINERY - ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS - PART 4: LOCATION AND ARRANGEMENT OF DISPLAYS AND CONTROL ACTUATORS |
| I.S. EN 1870-1:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE), DIMENSION SAWS AND BUILDING SITE SAWS |
| 16/30318924 DC : 0 | BS EN ISO 19085-6 - WOODWORKING MACHINES - SAFETY - PART 6: SINGLE SPINDLE VERTICAL MOULDING MACHINES ('TOUPIES') |
| 02/540559 DC : DRAFT JULY 2002 | EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS |
| I.S. EN ISO 8230:1998 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE |
| I.S. EN 1870-13:2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 13: HORIZONTAL BEAM PANEL SAWING MACHINES |
| 16/30341470 DC : 0 | BS EN ISO 19085-10 - WOODWORKING MACHINES - SAFETY - PART 10: BUILDING SITE SAWS (CONTRACTOR SAWS) |
| BS EN ISO 18217:2015 | Safety of woodworking machines. Edge-banding machines fed by chain(s) |
| 08/30178375 DC : 0 | BS EN 1218-2:2004/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| BS EN 15166:2008 | Food processing machinery. Automatic back splitting machines of butchery carcasses. Safety and hygiene requirements |
| PREN 15571 : DRAFT 2013 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR SURFACE FINISHING MACHINES |
| 09/30202538 DC : DRAFT JUN 2009 | BS EN 15955-2 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| 11/30251974 DC : 0 | BS EN 15180 - FOOD PROCESSING MACHINERY - FOOD DEPOSITORS - SAFETY AND HYGIENE REQUIREMENTS |
| 14/30276846 DC : 0 | BS EN ISO 18217 - SAFETY OF WOODWORKING MACHINES - EDGE-BANDING MACHINES FED CHAIN(S) |
| 12/30260496 DC : 0 | BS EN 12750 - SAFETY OF WOODWORKING MACHINES - FOUR SIDED MOULDING MACHINES |
| BS EN 1034-26:2012 | Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines Roll packaging machines |
| 09/30187535 DC : 0 | BS EN 13000 - CRANES - MOBILE CRANES |
| 15/30300474 DC : DRAFT FEB 2015 | BS ISO 19085-5 - WOODWORKING MACHINES - SAFETY - PART 5: DIMENSION SAWS |
| 12/30247814 DC : 0 | BS EN 1034-27 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 27: ROLL HANDLING SYSTEMS |
| BS EN 894-4:2010 | Safety of machinery. Ergonomics requirements for design of displays and control actuators Location and arrangement of displays and control actuators |
| DIN EN 16327:2014-07 | FIRE-FIGHTING - POSITIVE-PRESSURE PROPORTIONING SYSTEMS (PPPS) AND COMPRESSED-AIR FOAM SYSTEMS (CAFS) |
| 09/30201995 DC : 0 | BS EN 15949 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR BAR MILLS, STRUCTURAL STEEL MILLS AND WIRE ROD MILLS |
| 03/306595 DC : 0 | BS EN 14677 - SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| BS EN 1870-6:2017 | Safety of woodworking machines. Circular sawing machines Circular sawing machines for fire wood |
| DIN EN 14033-3:2014-08 (Draft) | RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 3: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 1870-18:2013 | Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws |
| UNE-EN 15571:2015 | Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface finishing machines |
| 16/30331355 DC : 0 | BS EN ISO 19085-8 - WOODWORKING MACHINES - SAFETY - PART 8: WIDE BELT CALIBRATING AND SANDING MACHINES |
| CLC/TS 50459-6:2005 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 6: Audible information |
| 14/30299146 DC : 0 | BS EN 16743 - FOOD PROCESSING MACHINERY - AUTOMATIC INDUSTRIAL SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS |
| DIN EN 415-8:2011-06 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| I.S. EN 12417:2001 | MACHINE TOOLS - SAFETY - MACHINING CENTRES |
| DIN EN 1034-27:2012-12 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems |
| 14/30298247 DC : 0 | BS EN 13020 - ROAD SURFACE TREATMENT MACHINES - SAFETY REQUIREMENTS |
| 09/30178385 DC : DRAFT FEB 2009 | BS EN 1218-5:2004/A1 - SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN |
| BS EN 15180:2014 | Food processing machinery. Food depositors. Safety and hygiene requirements |
| PD CEN/TR 614-3:2010 | Safety of machinery Ergonomic principles for the design of mobile machinery |
| 00/717064 DC : DRAFT NOV 2000 | PREN 14070 - SAFETY OF MACHINES TOOLS - TRANSFER AND SPECIAL PURPOSE MACHINES |
| BS EN 16186-3 : 2016 | RAILWAY APPLICATIONS - DRIVER'S CAB - PART 3: DESIGN OF DISPLAYS |
| 09/30178340 DC : 0 | BS EN 1870-10:2003/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 10: SINGLE BLADE AUTOMATIC AND SEMI-AUTOMATIC UP-CUTTING CROSS-CUT SAWING MACHINES |
| BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
| BS EN 16710-2:2016 | Ergonomics methods A methodology for work analysis to support design |
| 11/30245401 DC : 0 | BS EN 1034-8 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
| 09/30178334 DC : DRAFT FEB 2009 | BS EN 1870-8:2001/A1 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 8: SINGLE BLADE EDGING CIRCULAR RIP SAWING MACHINES WITH POWER DRIVEN SAW UNIT AND MANUAL LOADING AND/OR UNLOADING |
| CLC/TS 50459-5:2005 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 5: Symbols |
| UNE-EN ISO 18217:2016 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| BS EN 16186-2:2017 | Railway applications. Driver\'s cab Integration of displays, controls and indicators |
| I.S. CLC/TS 50459-3:2005 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 3: ERGONOMIC ARRANGEMENTS OF ERTMS/GSM-R INFORMATION |
| I.S. EN 16710-2:2016 | ERGONOMICS METHODS - PART 2: A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN |
| DIN EN 16710-2:2016-10 | ERGONOMICS METHODS - PART 2: A METHODOLOGY FOR WORK ANALYSIS TO SUPPORT DESIGN |
| S.R. CLC/TS 50459-3:2016 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 3: ERGONOMIC ARRANGEMENTS OF NON ETCS INFORMATION |
| S.R. CLC/TR 50459-7:2007 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 7: SPECIFIC TRANSMISSION MODULES |
| I.S. EN 1870-18:2013 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 18: DIMENSION SAWS |
| DIN EN 16851:2015-05 (Draft) | CRANES - LIGHT CRANE SYSTEMS |
| I.S. EN 1034-8:2012 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PAPER MAKING AND FINISHING MACHINES - PART 8: REFINING PLANTS |
| I.S. EN 415-8:2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| BS EN 15746-2 : 2010 | RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| I.S. EN ISO 19085-1:2017 | WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017) |
| EN 12331:2015 | Food processing machinery - Mincing machines - Safety and hygiene requirements |
| I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
| DIN EN ISO 16089:2016-06 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO 16089:2015) |
| EN ISO 18217:2015 | Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015) |
| UNI EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| UNI EN 1672-1 : 2014 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS |
| 15/30279801 DC : 0 | BS EN 15746-2 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 2: GENERAL SAFETY REQUIREMENTS |
| UNE-EN 16186-3:2017 | Railway applications - Driver's cab - Part 3: Design of displays |
| CLC/TS 50459-1:2015 | Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Driver-Machine Interface - Part 1: General principles for the presentation of ERTMS/ETCS/GSM-R information |
| CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 | SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| I.S. CLC TS 50459-5:2005 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS EUROPEAN RAIL TRAFFIC MANAGEMENT SYSTEM - DRIVER-MACHINE INTERFACE - PART 5: SYMBOLS |
| BS EN 809:1998+A1:2009 | Pumps and pump units for liquids. Common safety requirements |
| DIN EN 1870-4:2012-06 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING |
| UNE-EN 12463:2006 | Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene requirements |
| DIN EN 415-6:2013-09 | Safety of packaging machines - Part 6: Pallet wrapping machines |
| DIN EN 1501-1:2016-03 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles (includes Amendment A1:2015) |
| DIN EN 1218-2:2009-10 | Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or profiling machines fed by chain or chains (includes Amendment A1:2009) |
| DIN EN 1870-5:2013-01 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines (includes Amendment A2:2012) |
| DIN EN 1028-1:2008-09 | FIRE-FIGHTING PUMPS - FIRE-FIGHTING CENTRIFUGAL PUMPS WITH PRIMER - PART 1: CLASSIFICATION - GENERAL AND SAFETY REQUIREMENTS |
| DIN EN 13534:2011-02 | Food processing machinery - Curing injection machines - Safety and hygiene requirements (includes Amendment A1:2010) |
| DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| DIN EN 13457:2010-10 | Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving, cutting, cementing and cement drying machines - Safety requirements; German version EN 13457:2004+A1:2010 |
| DIN EN 1501-2:2010-02 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles (includes Amendment A1:2009) |
| DIN EN 1218-5:2010-02 | Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines with fixed table and feed rollers or feed chain (includes Amendment A1:2009) |
| DIN EN 13871:2015-01 | FOOD PROCESSING MACHINERY - CUBES CUTTING MACHINERY - SAFETY AND HYGIENE REQUIREMENTS |
| BS EN 1889-1:2011 | Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles |
| BS EN 13020:2015 | Road surface treatment machines. Safety requirements |
| DIN EN 1889-2:2009-07 | MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 2: RAIL LOCOMOTIVES |
| BS EN 1870-8:2012 | Safety of woodworking machines. Circular sawing machines Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading |
| BS EN 1218-1 : 1999 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 1: SINGLE END TENONING MACHINES WITH SLIDING TABLE |
| BS EN 1845:2007 | Footwear manufacturing machines. Footwear moulding machines. Safety requirements |
| BS EN 692 : 2005 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| BS EN 14656 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS |
| BS EN 12581 : 2005 | COATING PLANTS - MACHINERY FOR DIP COATING AND ELECTRODEPOSITION OF ORGANIC LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| BS EN 1870-16:2012 | Safety of woodworking machines. Circular sawing machines Double mitre sawing machines for V cutting |
| BS EN 848-3:2012 | Safety of woodworking machines. One side moulding machines with rotating tool Numerically controlled (NC) boring and routing machines |
| PD IEC/TS 62850:2013 | Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children |
| I.S. EN 859:2007 | SAFETY OF WOODWORKING MACHINES - HAND FED SURFACE PLANNING MACHINES |
| I.S. EN 860:2007 | SAFETY OF WOODWORKING MACHINES - ONE SIDE THICKNESS PLANING MACHINES |
| BS EN ISO 10472-1:2008 | Safety requirements for industrial laundry machinery Common requirements |
| BS EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar. Safety requirements |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| BS EN 14681 : 2006 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES |
| BS EN 1870-14 : 2007 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 14: VERTICAL PANEL SAWING MACHINES |
| BS EN 1870-17 : 2012 | SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 17: MANUAL HORIZONTAL CUTTING CROSS-CUT SAWING MACHINES WITH ONE SAW UNIT (RADIAL ARM SAWS) |
| BS EN 12921-1 : 2005 | MACHINES FOR SURFACE CLEANING AND PRE-TREATMENT OF INDUSTRIAL ITEMS USING LIQUIDS OR VAPOURS - PART 1: COMMON SAFETY REQUIREMENTS |
| BS EN 12312-7 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 7: AIR-CRAFT MOVEMENT EQUIPMENT |
| BS EN 12463:2014 | Food processing machinery. Filling machines and auxiliary machines. Safety and hygiene requirements |
| ISO 8230:1997 | Safety requirements for dry-cleaning machines using perchloroethylene |
| DIN EN 1846-2:2013-05 | Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance (includes Amendment A1:2013) |
| EN 12415:2000/A1:2002 | SAFETY OF MACHINE TOOLS - SMALL NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES |
| CEN/TR 16149:2011 | Guidance Document for drafting CEN/TC 158 Standards |
| UNI EN 1218-2 : 2009 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| DIN EN 16851:2017-06 | Cranes - Light crane systems |
| CEN/TR 614-3:2010 | Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery |
| DIN EN 14710-1:2009-06 | Fire-fighting pumps — Fire-fighting centrifugal pumps without primer — Part 1: Classification, general and safety requirements |
| EN 12629-1:2000+A1:2010 | Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 1: Common requirements |
| EN 12321:2003+A1:2009 | Underground mining machinery - Specification for the safety requirements of armoured face conveyors |
| DIN EN 14886:2008-06 | Plastics and rubber machines - Bandknife cutting machines for block foams - Safety requirements |
| EN 1034-16:2012 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines |
| NF EN 1218-5 : 2004 + A1 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 5: ONE SIDE PROFILING MACHINES WITH FIXED TABLE AND FEED ROLLERS OR FED BY CHAIN |
| EN 12001:2012 | Conveying, spraying and placing machines for concrete and mortar - Safety requirements |
| DIN EN 13898:2009-09 | MACHINE TOOLS - SAFETY - SAWING MACHINES FOR COLD METAL |
| EN 12840 : 2001 | SAFETY OF MACHINE-TOOLS - MANUALLY CONTROLLED TURNING MACHINES WITH OR WITHOUT AUTOMATIC CONTROL |
| EN 13570:2005+A1:2010 | Food processing machinery - Mixing machines - Safety and hygiene requirements |
| EN 1501-2:2005+A1:2009 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| EN 12750:2013 | Safety of woodworking machines - Four sided moulding machines |
| DIN EN 12151:2008-05 | MACHINERY AND PLANTS FOR THE PREPARATION OF CONCRETE AND MORTAR - SAFETY REQUIREMENTS |
| EN 1501-3:2008 | Refuse collection vehicles and their associated lifting devices - General requirements and safety requirements - Part 3: Front loaded refuse collection vehicles |
| DIN EN 15746-2:2011-12 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements (includes Amendment A1:2011) |
| UNI EN 15011 : 2014 | CRANES - BRIDGE AND GANTRY CRANES |
| UNE-EN 809:1999 | PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS |
| UNE-EN 860:2007+A2:2012 | Safety of woodworking machines - One side thickness planing machines |
| UNE-EN 12203:2004 | Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements |
| UNE-EN 848-2:2007+A1:2010 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| UNE-EN 848-2:2007 | Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines |
| UNE-EN 1870-17:2013 | Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) |
| UNE-EN 1501-2:2006 | Refuse collection vehicles and associated lifting devices - General requirements and safety requirements - Part 2: Side loaded refuse collection vehicles |
| UNE-EN 15011:2011 | Cranes - Bridge and gantry cranes |
| UNE-EN 15746-2:2011 | Railway applications - Track - Road-rail machines and associated equipment - Part 2: General safety requirements |
| UNE-EN 1870-5:2003 | Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cutting cross-cut sawing machines. |
| UNE-EN 859:2008+A2:2012 | Safety of woodworking machines - Hand fed surface planing machines |
| UNE-EN 415-5:2007 | Safety of packaging machines - Part 5: Wrapping machines |
| UNE-EN 1034-6:2006 | Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender |
| UNE-EN 12044:2006 | Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements |
| UNE-EN 12629-1:2001 | MACHINES FOR THE MANUFACTURE OF CONSTRUCTIONAL PRODUCTS FORM CONCRETE AND CALCIUM-SILICATE. SAFETY. PART 1: COMMON REQUIREMENTS |
| UNE-EN 1501-1:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear loaded refuse collection vehicles |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 61310-2:2008 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| EN 457 : 1992 | SAFETY OF MACHINERY - AUDITORY DANGER SIGNALS - GENERAL REQUIREMENTS, DESIGN AND TESTING |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.