EN 62087-3:2016
Current
The latest, up-to-date edition.
Audio, video, and related equipment - Determination of power consumption - Part 3: Television sets
19-02-2016
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions, and abbreviations
4 Specification of operating modes and
5 Measurement conditions
6 Procedures
Annex A (informative) - Considerations for On mode television
set power measurements
Annex B (normative) - Test report
Annex C (informative) - Example test report template
Bibliography
Annex ZA (normative) - Normative references to
international publications with their
corresponding European publications
IEC 62087-3:2015(E) specifies the determination of the power consumption and related characteristics of television sets. Television sets include, but are not limited to, those with CRT, LCD, PDP, OLED, or projection technologies. The operating modes and functions, as they specifically apply to television sets, are defined in detail in this part of IEC 62087. This first edition of IEC 62087-3 cancels and replaces Clauses 6 and 11 and Annex B of IEC 62087:2011. This standard together with IEC 62087-1 to IEC 62087-2 and IEC 62087-4 to IEC 62087-6 cancels and replaces IEC 62087:2011 in its entirety. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to Clauses 6 and 11 and Annex B of IEC 62087:2011. For TVs with an automatic brightness control feature, power may now be measured at multiple specific illumination levels. A method has been defined for determining the ratio of peak luminance expected in the home versus the peak luminance expected in the retail environment. Sections related to general measuring conditions and procedures are now in IEC 62087-1:2015. Sections related to signals and media are now in IEC 62087-2:2015. The titles have changed in order to comply with the current directives and to accommodate the multipart structure.
Committee |
CLC/TC 100X
|
DevelopmentNote |
Partially supersedes EN 62087. (02/2016)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
I.S. EN 62087-3:2016 | Identical |
NBN EN 62087-3 : 2016 | Identical |
NEN EN IEC 62087-3 : 2016 | Identical |
BS EN 62087-3:2016 | Identical |
UNE-EN 62087-3:2016 | Identical |
VDE 0868-103 : 2016 | Identical |
IEC 62087-3:2015 | Identical |
PN EN 62087-3 : 2016 | Identical |
NF EN 62087-3 : 2016 | Identical |
SN EN 62087-3 : 2016 | Identical |
CEI EN 62087-3 : 2016 | Identical |
SS-EN 62087-3 : 2016 | Identical |
DIN EN 62087-3 : 2016 | Identical |
DS EN 62087-3 : 2016 | Identical |
ONORM OVE EN 62087-3 : 2016 | Identical |
PNE-FprEN 62087-3 | Identical |
BS EN 62087-1:2016 | Audio, video, and related equipment. Determination of power consumption General |
EN 62087-1:2016 | Audio, video, and related equipment - Determination of power consumption - Part 1: General |
EN 62087-1:2016 | Audio, video, and related equipment - Determination of power consumption - Part 1: General |
EN 62542 : 2013 | ENVIRONMENTAL STANDARDIZATION FOR ELECTRICAL AND ELECTRONIC PRODUCTS AND SYSTEMS - GLOSSARY OF TERMS (IEC 62542:2013) |
EN 62087-2:2016 | Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media |
EN 62087-6:2015 | Audio, video and related equipment - Determination of power consumption - Part 6: Audio equipment |
IEC 62542:2013 | Environmental standardization for electrical and electronic products and systems - Glossary of terms |
EN 62087-5:2016 | Audio, video and related equipment - Determination of power consumption - Part 5: Set top boxes (STB) |
EN 50564:2011 | Electrical and electronic household and office equipment - Measurement of low power consumption |
IEC 62301:2011 | Household electrical appliances - Measurement of standby power |
IEEE 802.11-2016 | IEEE Standard for Information technology--Telecommunications and information exchange between systems Local and metropolitan area networks--Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
IEEE 802.3AZ : 2010 | TELECOMMUNICATIONS AND INFORMATION EXCHANGE BETWEEN SYSTEMS - LOCAL AND METROPOLITAN AREA NETWORKS - SPECIFIC REQUIREMENTS - PART 3: CARRIER SENSE MULTIPLE ACCESS WITH COLLISION DETECTION (CSMA/CD) ACCESS METHOD AND PHYSICAL LAYER SPECIFICATIONS - AMENDMENT 5: MEDIA ACCESS CONTROL PARAMETERS, PHYSICAL LAYERS, AND MANAGEMENT PARAMETERS FOR ENERGY-EFFICIENT ETHERNET |
IEC 62087-5:2015 | Audio, video, and related equipment - Determination of power consumption - Part 5: Set-top-boxes (STB) |
CEA TR 1 : 2012 | HOME ILLUMINATION STUDY |
EN 62087-4:2016 | Audio, video and related equipment - Determination of power consumption - Part 4: Video recording equipment |
IEC 61156-6:2010+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Work area wiring -Sectional specification |
IEC 61156-5:2009+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification |
IEC 62087-1:2015 | Audio, video, and related equipment - Determination of power consumption - Part 1: General |
IEC 62087-4:2015 | Audio, video, and related equipment - Determination of power consumption - Part 4: Video recording equipment |
IEC 62087-2:2015 | Audio, video, and related equipment - Determination of power consumption - Part 2: Signals and media |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.